Recovery of americium from nitric acid solutions containing calcium by different co-precipitation methods

Recovery of americium from nitric acid solutions was studied by co-precipitation as hydroxide with various ions like calcium, ferric, nickel using sodium hydroxide and ammonium hydroxide. Studies were also carried out to recover americium using lanthanum fluoride and bismuth phosphate co-precipitation. All the methods are able to co-precipitate Am quantitatively. However, co-precipitation of Am with optimum concentration iron using ammonia is found to be better from nitric acid solutions containing large concentrations of calcium ions. Approximately 2 g of Am was recovered from 150 litres of solution batch wise using iron.     

Characterization and reactivity of copper oxide catalysts supported on TiO2-ZrO2

A series of copper catalysts supported on TiO2-ZrO2 with copper loading varying from 1.0 to 21.6 wt % were prepared by a wet impregnation method. The catalysts were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflectance spectroscopy, electron spin resonance (ESR), temperature programmed reduction (TPR), and Brunauer-Emmett-Teller specific surface area measurements. Copper dispersion and metal area were determined by N2O decomposition by the passivation method. XRD results suggest that the copper oxide is present in a highly dispersed amorphous state at copper loadings <16.8 wt % in the sample and as a crystalline CuO phase at higher Cu loadings. Copper dispersion increases with Cu loading up to 5.1 wt % and levels off at higher loadings. The XPS peak intensity ratios of Cu 2p(3/2)/Ti 2p(3/2) and Cu 2p(3/2)/Zr 3d(5/2) were compared with the copper dispersion calculated from N2O decomposition. ESR results suggest the presence of two types of copper species on the TiO2-ZrO2 support. TPR profiles reveal the presence of highly dispersed copper oxide at lower temperatures and bulk CuO at higher temperatures. The catalytic properties were evaluated for the vapor-phase dehydrogenation of cyclohexanol to cyclohexanone and related to the dispersion of Cu on TiO2-ZrO2.     

Hydroarylation of alkynes and alkenes through alumina-sulfuric acid catalyzed regioselective CC bond formation

A highly atom-efficient synthetic protocol for hydroarylation of terminal-aryl alkynes and styrene through the regioselective CC bond formation via the electrophilic addition of naphthols and substituted phenols has been developed using alumina-sulfuric acid as a heterogeneous supported solid acid catalyst. This methodology shows excellent regioselectivity and affords the desired product in good to excellent yield. The heterogeneous catalyst can also be recycled efficiently without much loss of activity.     

CdSe quantum dot-dispersed DOBAMBC: an electro-optical study

Cadmium selenide quantum dot (CdSe QD) has been used as a dopant in ferroelectric liquid crystal (FLC) 2-methylbutyl 4-(4-decyloxybenzylideneamino) cinnamate (DOBAMBC). Effect of CdSe QD in DOBAMBC on its different electro-optical (E-O) properties has been studied in the SmC* phase. The optical micrographs recorded for the pure and composite material are showing good dispersion of QDs in the FLC matrix. Micrographs of unaligned sample cell revealed that CdSe QDs induce homeotropic alignment of FLC molecules. An appreciable change in the value of E-O parameters like tilt angle, spontaneous polarisation and response time with shifting of SmA–SmC* phase transition temperature has been observed for CdSe QD–DOBAMBC composite. The observed properties of composite system have been discussed on the basis of surface properties of QDs in FLC system.     

Highly Selective and Sensitive Graphene Based Electrochemical Sensor for Quantification of Receptor Agonist Rizatriptan

A highly selective and sensitive electrochemical sensor has been developed by modification of a glassy carbon electrode (GCE) with graphene (GRP) for quantification of Rizatriptan. The significant increase of the peak current and the improvement of the oxidation peak potential indicate that the electrochemical sensor facilitates the electron transfer of Rizatriptan. The oxidation peak current was proportional to the Rizatriptan concentration in the range from 100 to 600 µg/mL with detection (LOD) and quantification limit (LOQ) of 36.52 and 121.73 µg/mL, respectively. The developed method was successfully employed for quantification of Rizatriptan in pharmaceutical formulations. The sensor shows great promise for simple, sensitive and quantitative detection of Rizatriptan.     

One-Pot Palladium-Catalyzed Ligand- and Metal-Oxidant-Free Aerobic Oxidative Isocyanide Insertion Leading to 2-Amino-substituted-4(3H)-quinazolinones

An efficient, ligand- and metal-oxidant-free, one-pot, cascade aerobic oxidative, palladium-catalyzed, multicomponent reaction has been developed through isocyanide insertion of less active secondary amide and aromatic amine, which leads to 2-amino-substituted-4(3H)-quinazolinones. This approach proves to be one of the simplest methods for the synthesis of this class of valuable bioactive heterocyclic scaffolds.     

Facile Synthesis of Coumarinyl Isothiocyanate from Amino Coumarin

One-pot conversion of amino coumarin to corresponding coumarinyl isothiocyanate using carbon disulfide, iodine, and pyridine is described. In this reaction, pyridine acts as a solvent as well as a catalyst to give coumarinyl isothiocyanate. Excellent yield, short reaction time, and mild reaction conditions make this method a useful synthetic procedure for one-pot preparation of coumarinyl isothiocyanate.     

Molecular docking,synthesis and anticonvulsant activity of some novel 3-(2-substituted)-4-oxothiazolidine-3-yl)-2-phenylquinazoline-4(3H)-ones

Research on Chemical Intermediates - As the therapeutic potential of quinazolinone and thiazolidinone is well mentioned in literature for their versatile biological activities, their related...     

High-rate and high-density gas separation adsorbents and manufacturing method

High-rate and high-density gas separation adsorbents used in vacuum pressure swing adsorption (VPSA) processes are described. Agglomerated zeolite Li–LSX compositions made using colloidal silica binding agents and having improved nitrogen pore diffusivity compared to like compositions prepared with traditional clay binders, are also described. Preparation methods for the colloidal silica-bound adsorbents are described together with their characterization by mercury (Hg) porosimetry, scanning electron microscopy (SEM) and low dead-volume breakthrough testing, from which the pore diffusivity is obtained. In this article, we show how the location and dispersion of the colloidal silica binding agent within the agglomerated zeolite particle yields pore-architectures that resemble “state-of-the-art” binderless adsorbents. In addition, we use VPSA process simulations to show that the best process performance is achieved by the combination of high-rate and high-density adsorbent properties.     

HPLC–PDA identification and resolution of rufinamide forced degradation impurities: A congregated chemometric expedite optimization coupled with factorials and desirability

Rufinamide is used presently to treat Lenaux–Gastaut syndrome. A full factorial design and desirability approach was investigated for the optimization of hydrolytic stress via response surface curves (RSCs). The degradation impurities were identified and resolved using reversed-phase high-performance liquid chromatography (RP-HPLC) on the Qualisil® BDS C₈ column. Acetonitrile–water (29:71, v/v) was optimized for the mobile phase and used at a flow rate of 1.0 ml/min with detection at a wavelength of 230 nm. Rufinamide showed appreciable susceptibility to hydrolysis under acidic and alkaline stress, and substantial degradation in the neutral condition. It degraded much less under oxidative stress. Exposure towards thermal and photolytic stress conditions indicated appreciable stability. The developed method was subjected to validation as per the recommendations of the International Conference on Harmonization. The proposed method showed no influence from the excipients and the degradation products. As well as good precision and accuracy in determination, the method showed a linear response between 2 and 12 μg ml⁻¹. The method was extended for determination in a human plasma sample, which resulted in excellent recovery without interference from matrix effects. The combined use of desirability and design for the optimization of acidic and alkaline hydrolytic stress led to simple and rapid analysis.