Discovery of new mutually orthogonal bioorthogonal cycloaddition pairs through computational screening

Density functional theory (DFT) calculations and experiments in tandem led to discoveries of new reactivities and selectivities involving bioorthogonal sydnone cycloadditions. Dibenzocyclooctyne derivatives (DIBAC and BARAC) were identified to be especially reactive dipolarophiles, which undergo the (3 + 2) cycloadditions with N-phenyl sydnone with the rate constant of up to 1.46 M^–1 s^–1. Most significantly, the sydnone-dibenzocyclooctyne and norbornene-tetrazine cycloadditions were predicted to be mutually orthogonal. This was validated experimentally and used for highly selective fluorescence labeling of two proteins simultaneously.     

Water-acetic acid mediated an efficient one-pot eco-friendly synthesis of novel bis-isoxazolopyrroloquinoline derivatives

An efficient, cost-effective and environmentally benign synthesis of novel tetracyclic bis-isoxazolopyrroloquinoline derivatives has been developed via one-pot four-component reaction of 4-amino-3-methyl-5-styrylisoxazoles, dimedone, aryl glyoxal monohydrates and 5-amino-3-methylisoxazole by employing water as a reaction medium and acetic acid (AcOH) as a green promoter. The advantages of this protocol are environmentally friendly, metal-free, less reaction time, operational simplicity, high yields, broad substrate scope and easy purification. Most significant of all, this method is green.     

Graphene oxide‐catalyzed CSp3–H activation of methylarenes in aqueous medium: A unified metal‐free access to amides and benzimidazoles

Graphene oxide (GO)‐catalyzed selective synthesis of amides via C_Sp3–H activation of methylarenes and consequent C–N bond formation with anilines under aqueous medium has been described. Oxygen functionality allied with GO surface played a dual role both as acid catalyst and oxidizing agent to some extent. However, GO has a copious effect on the reaction, shown by a high TOF value with TBHP as co‐oxidant. The decisive role of carboxylic acid functional groups on GO nanosheets in this metal‐free strategy has been confirmed and was monitored by various analytic techniques viz. Fourier transform‐infrared, UV–Vis, Raman and XPS. A plausible mechanism was proposed by control experiments and by the isolation of the intermediate. Over‐oxidation of methylarenes was not detected, and high recyclability of the carbocatalyst with its heterogeneous behavior facilitated the isolation and purification of the desired products. We have further explored the utility of this process for the chemoselective synthesis of benzimidazoles.     

Influence of the addition of aluminium nanoparticles on thermo-rheological properties of hydroxyl-terminated polybutadiene-based composite propellant and empirical modelling

The heat transfer performance and entropy analysis are done in a compact loop heat pipe (CLHP) with Al₂O₃/water and Ag/water nanofluid. A compact loop heat pipe having a flat square evaporator with dimensions of 34 mm (L)?×?34 mm (W)?×?19 mm (H) has been fabricated and tested for the heat load ranging from 30 to 500 W. The experimental tests are conducted by keeping the CLHP in the vertical orientation with distilled water, silver (Ag)/water and aluminium oxide (Al₂O₃)/water nanofluid having low volume concentrations of (0.09% and 0.12%). The effect of wall and vapour temperature, evaporator and condenser heat transfer coefficient, thermal resistance on the applied heat loads is experimentally investigated and compared. The experimental results showed that the evaporator thermal resistance is reduced by 34.70% and 20.21%, respectively, for 0.12 vol% of Ag, Al₂O₃ nanoparticles when compared with that of the distilled water. For the same volume concentrations of Ag, Al₂O₃ nanoparticles, an enhancement of 34.52%, 23.7%, 39.27% and 30.8%, respectively, observed for the convective heat transfer coefficients at the evaporator and condenser. The entropy is also reduced by 19.08% and 11.58% when Ag and Al₂O₃ nanofluids are used as the operating fluid. From the experimental tests, it is found that the addition of small amount of Ag nanoparticles in the working fluid enhanced the operating range by 15% when compared with that of Al₂O₃/water nanofluid without the occurrence of any dry-out conditions.

     

Molecular Design Tactics for Highly Efficient Thermally Activated Delayed Fluorescence Emitters for Organic Light Emitting Diodes

Recently, pure organic thermally activated delayed fluorescence (TADF) emitters have attracted considerable interest from the scientific community in the field of organic light emitting diodes (OLEDs) as they can theoretically realize 100 % of the internal quantum efficiency by exploiting both the singlet and triplet excitons via the reverse intersystem crossing enabled by small singlet‐triplet energy splitting. Currently, the external quantum efficiency of the TADF emitters is reaching the level of phosphorescent emitters. Therefore, the TADF approach is considered as a potential alternative to the low efficiency conventional fluorescent and expensive phosphorescent emitters. In this account, we summarized our recent development of blue and green TADF molecular designs to improve the device performances of the TADF devices.     

On the spectroscopic examination of printed documents by using a field emission scanning electron microscope with energy-dispersive X-ray spectroscopy (FE-SEM-EDS) and chemometric methods: application in forensic science

Analytical and Bioanalytical Chemistry - The detection of computer-generated document forgeries has always been a challenging task for forensic document examiners (FDE). With the aim to support the...     

Diindeno-Fused Dibenzo[a,h]anthracene and Dibenzo[c,l]chrysene: Syntheses,Structural Analyses,and Properties

Diindeno-fused dibenzo[a,h]anthracene 6 and diindeno-fused dibenzo[c,l]chrysene 9 contain the key moieties 1,4-quinodipropene (1,4-QDP) and 2,6-naphthoquinodipropene (2,6-NQDP), respectively, and they both have an open-shell singlet ground state. The latter compound exhibits a strong biradical character and interesting properties, including a low ΔE_T−S (2.44 kcal mol⁻¹), a small HOMO–LUMO gap (1.06 eV), a wide photoabsorption range (250–1172 nm), and a large two-photon absorption cross-section (σ=1342±56 GM). This work verifies that 6 has a slightly larger HOMO–LUMO gap and ΔE_T−S than its helical isomer diindeno[2,1-f:1′,2′-j]picene (DIP), but is a much stronger two-photon absorber, verifying the important effect of geometry on the photophysical properties.     

Abnormal Nucleophilic Substitution on Methoxytropone Derivatives: Steric Strategy to Synthesize 5-Substituted Azulenes

Azulene is a non-alternant non-benzenoid aromatic system, and in turn, it possesses unusual photophysical properties. Azulene-based conjugated systems have received increasing interest in recent years as optoelectronic materials. Despite the routes available for the preparation of substituted azulene derivatives, there remain few methods that allow regioselective substitution on the seven-membered ring of azulenes due to the subtle reactivity difference among the various positions. This report explores the reactivity of substituted tropolones as the azulene precursors and also provides a new method to create 5-substituted azulenes. The reaction of cyanoacetate enolate with unsubstituted 2-methoxytropone affords azulene through the attack of the nucleophile on the C-2 center (normal pathway). We have observed that 3-substituted 2-methoxytropones undergo steric-guided nucleophilic addition at the C-7 center (abnormal pathway) to afford 5-substituted azulene derivatives. Based on this observation and DFT calculation, a new synthetic strategy is devised for the regioselective synthesis of 5-substituted multifunctional azulenes, which cannot be accessed by any other method.     

New features in the catalytic cycle of cytochrome P450 during the formation of compound I from compound 0

Density functional theory (DFT) is applied to the dark section of the catalytic cycle of the enzyme cytochrome P450, namely, the formation of the active species, Compound I (Cpd I), from the ferric-hydroperoxide species (Cpd 0) by a protonation-assisted mechanism. The chosen 96-atom model includes the key functionalities deduced from experiment: Asp(251), Thr(252), Glu(366), and the water channels that relay the protons. The DFT model calculations show that (a) Cpd I is not formed spontaneously from Cpd 0 by direct protonation, nor is the process very exothermic. The process is virtually thermoneutral and involves a significant barrier such that formation of Cpd I is not facile on this route. (b) Along the protonation pathway, there exists an intermediate, a protonated Cpd 0, which is a potent oxidant since it is a ferric complex of water oxide. Preliminary quantum mechanical/molecular mechanical calculations confirm that Cpd 0 and Cpd I are of similar energy for the chosen model and that protonated Cpd 0 may exist as an unstable intermediate. The paper also addresses the essential role of Thr(252) as a hydrogen-bond acceptor (in accord with mutation studies of the OH group to OMe).     

Size-selective synthesis and stabilization of gold organosol in C(n)TAC: enhanced molecular fluorescence from gold-bound fluorophores

Gold nanoparticles of variable sizes have been synthesized in toluene employing two-phase (water-toluene) extraction of AuCl4- followed by its reduction with sodium borohydride in the presence of a series of cationic surfactants of a homologous series having the general formula C(n)TAC. The solubility features of the gold particles in the organic solvent have been accounted qualitatively by calculating the van der Waals interaction potential between the particles. The effect of thermal energy and medium dielectric constant on the stability of metal particles has been studied by measuring the surface plasmon resonance. The stabilization of surfactant-mediated gold particles as hydrosol or organosol has been elucidated by considering the double-layer interaction as a function of the dielectric constant of the solvent medium. The influence of the counterion of the phase transfer reagent and stabilizing ligand on the photochemical stability of the gold colloids has been investigated. The fluorescence probe 1-methylaminopyrene (MAP) was considered for the surface functionalization of the gold particles, and it has been found that there is an enhancement of molecular fluorescence from the gold-probe assembly.