Polymerization of methyl methacrylate using isatoic anhydride–bromine donor–acceptor complex as the photoinitiator

Isatoic anhydride (IA) alone did not initiate photopolymerization of methyl metacrylate (MMA) at 40°C when exposed to visible light for about 180 min. But IA, when used in combination with bromine (Br₂) as the initiator, initiated the photopolymerization of MMA readily under the same conditions. This behavior was explained by the formation of a donor-acceptor type of complex between IA and Br₂ in the presence of MMA. The polymerization was found to proceed via a free radical mechanism and the radical generation process was considered to follow an initial complexation reaction between the initiator components and monomer. The complex initiator showed nonideal kinetics for the present system (initiator exponent < 0.5) and was analyzed. The monomer exponents varied from 0.83 to 1.15 normally depending on the nature of solvent used. Initiator-dependent chain termination was significant as well as the bimolecular mode of chain termination. © 1993 John Wiley & Sons, Inc.     

Optimisation of physical and mechanical properties of rubber compounds by response surface methodology--Two component modelling using vegetable oil and carbon black

Response surface methodology was used for predicting the optimal composition of vegetable oil and carbon black in rubber compounding. Central composite rotatable design for two variables at five levels was chosen as the experimental design. The data obtained from measurement of properties was fitted as a two variable second order equation and were plotted as contour plots using programme developed in MATLAB v.5. It is observed from the contour plots that the increase in cross-link density caused by the formation of rubber mono-layer from its multi-layer on increasing the carbon black loading upto the central point (50 phr) of experimental region increases 300% modulus and elongation at break and reduces the ultimate properties like tear strength and tensile strength. On the other-hand hardness increases with increase in solid inclusion of carbon black. From the contours it is observed that the addition of vegetable oil upto 2-3 phr, cross-link density increases due to its coupling action leading to increase in hardness and modulus and lowering of ultimate properties like tensile strength and elongation at break. Addition of further amount of vegetable oil shows less coupling and more plasticising effect leading to increase in tear strength, tensile strength and elongation at break and decrease in hardness and 300% modulus.     

Synthesis of 1-beta-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (beta-IAZA): a novel marker of tissue hypoxia

The present work describes the synthesis of the beta-isomer of 1-alpha-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (IAZA). Radioiodinated IAZA ((123)I-IAZA) has been extensively studied as a radiopharmaceutical for the diagnosis of regional and/or focal tissue hypoxia in a variety of clinical pathologies. The beta-anomer of IAZA, 1-beta-D-(5-deoxy-5-iodoarabinofuranosyl)-2-nitroimidazole (beta-IAZA, 1), was synthesized via an unconventional route starting from 1-beta-D-(ribofuranosyl)-2-nitroimidazole (AZR), with a change of configuration at the C-2'-position to afford 1-beta-D-(arabinofuranosyl)-2-nitroimidazole (beta-AZA, 7). Nucleophilic iodination of the 5'-O-toluenesulfonyl-2',3'-di-O-acetyl precursor of beta-AZA, 9, followed by deprotection, afforded 1 in satisfactory yield. beta-IAZA (1) was also synthesized from 7 using molecular iodine and triphenylphosphine.     

An experimental and theoretical study of excited-state dipole moments of some flavones using an efficient solvatochromic method based on the solvent polarity parameter, E(N)(T)

The electronic absorption and fluorescence spectra of some biologically active natural flavones have been recorded at room temperature (298 K) in solvents of different polarities. The effects of the solvents upon the spectral properties are discussed. Difference in fluorescence intensity of flavones has been explained on the basis of intersystem crossing and degree of non-planarity calculated theoretically using Austin Model 1 (AM1) method. Excited-state dipole moments have been determined using the solvatochromic method based on the microscopic solvent polarity parameter, E(N)(T). A reasonable agreement has been observed between experimental and AM1 calculated dipole moment changes. Our results are found to be quite reliable in view of the fact that the correlation of the solvatochromic Stokes shifts with microscopic solvent polarity parameter, E(N)(T) is superior to that obtained using bulk solvent polarity functions for all the systems studied here.     

Aminoethylprolyl (aep) PNA: mixed purine/pyrimidine oligomers and binding orientation preferences for PNA:DNA duplex formation

[structure in text] The synthesis of (2S,4S)- and (2R,4S)-aepPNA monomers of adenine, guanine, and cytosine (3-5) and their incorporation at appropriate positions into aegPNA sequence 7 leads to mixed aeg-aep backbone/mixed nucleobase PNAs 8-11. The thermal stabilities of the derived duplexes with DNA are found to be dependent on nucleobase and backbone stereochemistry.     

Reatarding effect of nitrogen ylide for the polymerization of N-vinyl pyrrolidone

-Picolinium-p-chlorophenacylide (-PCFY) acts as a retarder for polymerization of N-vinyl pyrrolidone. The polymerization runs were carried out at 60°C using benzene as an inert solvent. The kinetic equation for the present system may be written asR _p [-PCPY]^–1.0 [AIBN]^0.66[N-VP]^1.0. The value of overall energy of activation for polymerization in presence and absence of-PCPY was computed as 44.0 and 42.3 kJ mol^–1, respectively. The inverse relationship ofR _p and¯M _v with-PCPY suggests that-PCPY acts as a polymerization retarder. The retarding effect is also evidenced by higher initiator exponent value and higher value of energy of activation in presence of ylide. A mechanism is also proposed in which polymer propagating chain combines with one ylide component to give resonance stabilized radical.     

Nucleation of β-hairpin structure in a pyrrole amino acid containing peptide

Synthesis and conformational studies of two short peptides containing pyrrole amino acids (1, Paa), Boc-Paa-Paa-d-Pro-Gly-Xaa-Paa-Paa-OMe (2: Xaa=Ala; 3: Xaa=Val), were carried out in which it was established that replacement of Ala in 2 with a Val residue helps peptide 3 to adopt a well-defined β-hairpin conformation in a nonpolar solvent, like CDCl₃.     

Depression in the cloud point of Tween in the presence of glycol additives and triblock polymers

Cloud point (C_P) measurements of Tween 20 and Tween 80 were carried out in the presence of various glycol oligomers and triblock polymers (TBP). The cloud points of both Tween 20 and 80 decrease in the presence of both types of additives. Among the glycol oligomeric additives, ethylene glycol monobutyl ether was found to reduce the C_P maximum. An increase in the repeating units of polymeric glycol additives leads to a decrease in C_P. Reduction in the C_P in the presence of TBP depends upon the increase in hydrophobic/hydrophilic ratio among the polypropylene to polyethylene units.     

A new method for determining the local environment and orientation of individual side chains of membrane-binding peptides

We studied here the binding of the mastoparan X peptide to a zwitterionic lipid bilayer (POPC) and demonstrated that nitrile-derivatized amino acids can be used to determine the hydration state (or change in hydration state) of specific sites of membrane-interactive peptides (upon binding). We have also shown that polarized ATR-FTIR measurements can further be used to uncover information regarding the spatial orientation of individual side chains as well as their conformational preference within the lipid bilayer.     

Synthesis of carpachromene and related isopentenylated derivatives of apigenin

Acacetin (4) on reaction with prenyl bromide in the presence of methanolic sodium methoxide yielded 6,8-di-C-prenyl-(5) and 6-C-prenyl-(10) derivatives. The former (5) formed the corresponding bisdihydropyrano derivative (8). Monomethyl derivative of 10 (12) gave monodihydropyrano derivative (13). DDQ reaction of 10 followed by methylation afforded di-O-methyl carpachromene (2); whereas that of 5 gave a mixture of 21 and 22.

Nuclear prenylation of apigenin (3) in a similar way gave 6,8-di-C-C-prenyl-(16), its 7-0-prenyl-(15) and 6-C-prenyl-(18) derivatives. DDQ reaction of 18 provided natural carpachromene.¹ The structure of the isopentylated apigenin isolated by Dreyer et al.² needs further consideration.