Synthesis and Characterization of Homoleptic and Heteroleptic Complexes Involving Dithiocarbamates,Triphenylphosphine, and Nickel(II)

Abstract

Six new nickel complexes of two dithiocarbamate ligands (cyfdtc = N-cyclohexyl-N- furfuryldithiocarbamate and bztpedtc = N-benzyl-N-[2-thiophenylethyl]dithiocarbamate) namely, (Ni[cyfdtc]₂) (1), (Ni[bztpedtc]₂) (2), (Ni[cyfdtc][NCS][PPh₃]) (3), (Ni[bztpedtc] [NCS][PPh₃]) (4), (Ni[cyfdtc][PPh₃]₂)ClO₄ (5), and (Ni[bztpedtc][PPh₃]₂)ClO₄ (6) have been prepared and characterized using IR, electronic, and NMR (¹H and ¹³C) spectra. A single crystal X-ray structural analysis was carried out for complex 3 and showed that nickel is in a distorted square planar arrangement with the NiS₂PN chromophore. The shift in ν_C?N of the heteroleptic complexes to higher frequencies compared with the parent complex is assigned to mesomeric delocalization of electron density from the

dithiocarbamate ligand toward the metal atom, which increases the contribution of polar thioureide form in mixed ligand complexes. Electronic spectral studies suggest square planar geometry for the complexes. In the ¹³C NMR spectra, the upfield shift of NCS₂ carbon signal for 3 and 4 from the chemical shift value of 1 and 2 is due to effect of PPh₃ on the mesomeric drift of electron density toward nickel throughout thioureide C?N bond.     

Green Enzymatic Synthesis of L-Ascorbyl Fatty Acid Ester: An Antioxidant

In green chemistry, biocatalysis using microwaves is a very attractive tool for various regioselective syntheses. L-Ascorbyl fatty acid esters were synthesized by an immobilized lipase from Bulkholderia multivorans using microwaves, with a dynamically enhanced rate of reaction and appreciable yield of around 80%. Microwave radiation had no effect on enzymic inactivation, however, synergism between microwaves and biocatalyst was observed.     

The effect of phonon modes on the H2(v, j)/D2(v, j)-Cu(1nn) scattering processes

We include the effect of the phonon modes originating from the three layers of Cu(1nn) surface atoms on the dynamics of incoming molecular [H(2)(v, j)/D(2)(v, j)] degrees of freedom (DOFs) through a mean-field approach, where the surface temperature is incorporated into the effective potential by considering Bose-Einstein probability (BEP) factor for the initial state distribution of the surface modes calculated within harmonic approximation. Such time and temperature dependent effective Hamiltonian is further subdivided assuming a weak coupling between the two sets of molecular DOFs, namely, (x, y, z, Z) and (X, Y), respectively, in particular, to reduce the computational cost and the corresponding coupled quantum dynamical equations of motion have been formulated in terms of Time Dependent Discrete Variable Representation (TDDVR) approach. We demonstrate the workability of TDDVR method to investigate the scattering of H(2)(v, j) on Cu(1nn) surface by calculating the reaction probabilities and scattering cross-sections. Calculated results show that the phonon modes affect (a) the state-to-state transition probabilities of the scattered H(2) molecule substantially but chemisorption and physisorption processes negligibly and (b) the reaction probability of the incoming D(2) molecule noticeably.     

Phase transition studies in symmetric dimeric liquid crystals

As a part of the systematic studies on symmetric liquid crystal dimer homologous series, α,ω-bis-(4-n-alkylaniline benzylidene-4′-oxy) alkanes, (referred to as m.OnO.m with m = 3, 4, and 5; and n = 8, 9, and 10), we present in this article the nature of phase transitions across isotropic–nematic and nematic–smectic-A (N–SmA) phases exhibited by the just mentioned compounds. The methods employed are differential scanning calorimetry and dilatometry. The compounds studied were 3.O8O.3, 4.O8O.4, and 5.O8O.5; and 3.O9.03, 5.O9O.5, 3.O10O.3, 4.O10O.4, and 5.O10O.5. Different from the case of their corresponding monomers, all these compounds exhibit a nematic phase only with the exception of 5.O8O.5 which exhibits a SA phase in addition to the nematic phase. The phase transitions viz., isotropic–nematic transitions studied in all these compounds were confirmed to be of first-order nature, whereas the N–SmA transition exhibited by the compound 5.O8O.5 only was found to be of second-order nature. We also report in this article the calculated density jumps, thermal expansion coefficient maxima, and pressure dependence of transition temperatures which are analyzed in the light of the available literature data.     

Full spin and spatial symmetry adapted technique for correlated electronic hamiltonians: Application to an icosahedral cluster

One of the long standing problems in quantum chemistry had been the inability to exploit full spatial and spin symmetry of an electronic Hamiltonian belonging to a non‐Abelian point group. Here, we present a general technique which can utilize all the symmetries of an electronic (magnetic) Hamiltonian to obtain its full eigenvalue spectrum. This is a hybrid method based on Valence Bond basis and the basis of constant z‐component of the total spin. This technique is applicable to systems with any point group symmetry and is easy to implement on a computer. We illustrate the power of the method by applying it to a model icosahedral half‐filled electronic system. This model spans a huge Hilbert space (dimension 1,778,966) and in the largest non‐Abelian point group. The C₆₀ molecule has this symmetry and hence our calculation throw light on the higher energy excited states of the bucky ball. This method can also be utilized to study finite temperature properties of strongly correlated systems within an exact diagonalization approach. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

On the mechanism of nanopore filling of SAPO-5 molecular sieve by nitrogen molecules

SAPO-5 molecular sieve was synthesized according to patent literature and characterized with X-ray diffraction, electron microscopy (SEM, TEM), and solid state magic angle spinning NMR spectroscopy. The material of particles in the micrometer region was found to consist of ca. 20 nm microcrystallites packed in mostly parallel orientation to ca. 200 nm sized agglomerates. The nitrogen adsorption isotherm was measured at 77.6 K over ca. 7 decades of pressure up to pore saturation. The course of the isotherm is interpreted to consist of filling of the nanopores (diameter, 0.73 nm) up to 2N(2)/unit cell, subsequent multilayer adsorption on the outer surface of the agglomerates, and, finally, pore condensation in the interparticle adsorption space. The nanopore adsorption can be quantitatively reproduced with the statistical mechanical model of a quasi one-dimensional lattice gas taking intermolecular interactions into account. The evaluated energy parameters are of physically reasonable magnitude and agree with literature data. The multilayer part of the adsorption isotherm can be well represented by the Brunauer-Emmett-Teller model yielding a specific outer space area (63 m(2) g(-)(1)) which is consistent with estimated geometrical and pore size analysis data.     

SnCl4/Sn catalyzed chemoselective reduction of glycopyranosyl azides for the synthesis of diversely functionalized glycopyranosyl chloroacetamides

A method for the chemoselective reduction of glycopyranosyl azides using SnCl₄ and tin metal as the reducing agent followed by in situ chloroacetylation of the synthesized glycopyranosyl amine was developed. This reaction is applicable to diversely functionalized glycopyranosyl azides for the synthesis of glycopyranosyl chloroacetamides.     

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes: an entry to tetraorganosilicon reagents for the silicon-based cross-coupling reaction

Alkenyl- and aryl[2-(hydroxymethyl)phenyl]dimethylsilanes, highly stable tetraorganosilicon reagents, are found to react with aryl and alkenyl iodides in the presence of a palladium catalyst and K2CO3 as a base, significantly milder conditions compared with those ever reported for the silicon-based cross-coupling reactions. The reaction tolerates a wide range of functional groups, including silyl protectors, and allows a gram-scale synthesis to recover and reuse the silicon residue.     

Kinetic studies on saponification of ethyl acetate using an innovative conductivity‐monitoring instrument with a pulsating sensor

An innovative conductometric measurement technique using a nonconventional but high‐performance (high‐precision, high‐resolution, rapid response features for online graphic display) in house–built pulsating conductivity monitoring instrument has been deployed to study the kinetic behavior during the reaction of ethyl acetate and NaOH. A laboratory‐made constant temperature reaction bath with the facility of continuous stirring of solution for homogeneous mixing was used to carry out experiments at desired solution temperatures. Rate constants of the saponification reaction in the temperature range at various temperatures (30–55°C) were determined, and the results were compared with the reported values. Although the reported data exhibit wide scatter, our data are in agreement with some of the literature data. From these data, thermodynamic parameters such as activation energy, activation enthalpy, activation entropy, and activation free energy have been evaluated. With the introduction of this novel conductometric measurement technique, the determination of rate constants at various solution temperatures becomes much simpler and faster. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 648–656, 2011     

Effective oxidation of alcohols by Iron(III)-Schiff base-triphenylphosphine complexes

Iron(III)-Schiff base-triphenylphosphine complexes catalyze the oxidation of alcohols to their corresponding carbonyl compounds in presence of hydrogen peroxide in good yields.