Ethanol production in a membrane bioreactor

Pilot plant trials were conducted in a corn wet mill with a 7000-L membrane recycle bioreactor (MRB) that integrated ceramic microfiltration membranes in a semi-closed loop configuration with a stirred-tank reactor. Residence times of 7.5–10 h with ethanol outputs of 10–11.5% (v/v) were obtained when the cell concentration was 60–100 g/L drywt of yeast, equivalent to about 10⁹−10¹⁰ cells/mL. The performance of the membrane was dependent on the startup mode and pressure management techniques. A steady flux of 70 L/(m²·h) could be maintained for several days before cleaning was necessary. The benefits of the MRB include better productivity; a clear productstream containing no particulates or yeast cells, which should improve subsequent stripping and distillation operations; and substantially reduced stillage handling. The capital cost of the MRB is $21–$34/(m³·yr) ($0.08–$0.13/[gal·yr]) of ethanol capacity. Operating cost, including depreciation, energy, membrane replacement, maintenance, labor, and cleaning, is $4.5–9/m³ ($0.017–$0.034/gal) of ethanol.     

Greener approach toward the generation of dimedone derivatives

The use of dimedone in green chemistry has been described for the synthesis of selective heterocyclic motifs which are both pharmacologically and industrially important. The objective of this review is to summarize some of the selected recent advances of dimedone in the synthesis of organic compounds utilizing green chemistry procedures.     

Numerical Investigation of Graphene as a Back Surface Field Layer on the Performance of Cadmium Telluride Solar Cell

This paper numerically explores the possibility of ultrathin layering and high efficiency of graphene as a back surface field (BSF) based on a CdTe solar cell by Personal computer one-dimensional (PC1D) simulation. CdTe solar cells have been characterized and studied by varying the carrier lifetime, doping concentration, thickness, and bandgap of the graphene layer. With simulation results, the highest short-circuit current (I_sc = 2.09 A), power conversion efficiency (η = 15%), and quantum efficiency (QE~85%) were achieved at a carrier lifetime of 1 × 10³ μs and a doping concentration of 1 × 10¹⁷ cm⁻³ of graphene as a BSF layer-based CdTe solar cell. The thickness of the graphene BSF layer (1 μm) was proven the ultrathin, optimal, and obtainable for the fabrication of high-performance CdTe solar cells, confirming the suitability of graphene material as a BSF. This simulation confirmed that a CdTe solar cell with the proposed graphene as the BSF layer might be highly efficient with optimized parameters for fabrication.     

Greener approach toward synthesis of biologically active s-Triazine (TCT) derivatives: A recent update

The greener methodology to synthesize s-triazine derivatives (also known as TCT) is described, including synthesis through microwave, ultrasound, and solvent-free conditions. This review mainly focuses on reactions of TCT (2,4,6-trichloro-1,3,5-triazine) with various substituents having amine and hydroxy functionalities to give corresponding triazine derivatives under a greener approach. The results of reactions indicate that, unlike classical methods, green methods result in better yields of the product, through a rapid reaction, under mild reaction conditions, and by easy workup procedures.     

Development of New Molecular Entities as Potent Antifungal Agents: Synthesis of Substituted 1,2,3-Triazoles

Russian Journal of General Chemistry - A series of novel 1,2,3-triazoles (8a–8m) were synthesized using click chemistry in excellent yields and were characterized by IR, NMR, MASS...     

Synthesis, characterization and reactivity of some novel dinuclear mixed-ligand peroxouranium(VI) complexes

Novel anionic dinuclear mixed-ligand peroxo complexes of the type [(UO₂)₂(O₂)₃L(H₂O)₂]³⁻ (L = Histidinate, aspartate, salicylate, Imidazolate and glutamate) have been synthesized from the interaction of uranyl ion (UO₂²⁺) with peroxide (O₂²⁻) in the presence of the respective coligand (L) at pH 9–10. The sparingly soluble complexes were characterized by elemental analyses, FT-IR, laser Raman (LR) and UV-vis spectroscopy and solution electrical conductance measurements. Based on these studies, a double bridged dinuclear structure involving one peroxo and the mixed ligand L (via-COO⁻) has been tentatively proposed. Infra-red coupled with LR spectra evidenced structurally different metal bound peroxides (ν² and σ:σ). An aqueous solution of the salicylate and aspartate complexes have been shown to convert triphenylphosphine (PPh₃), cyclohexene, styrene and SO₂ to the corresponding OPPh₃, 1,2 cyclohexanediol, phenylethyleneglycol and SO₄²⁻, respectively.     

Redox reactions of transient species formed during pulse radiolysis of 2-pyridine carboxaldehyde and 2-pyridine methanol in aqueous solutions

Rate constants for the reactions of e _aq ^? , H and OH radicals with 2-pyridine carboxaldehyde and 2-pyridine methanol have been determined by pulse radiolysis technique. Reactions of reducing radicals such as acetone ketyl radicals and CO₂ ^? with these compounds were also evaluated at various pHs. The species produced by the reaction of reducing radicals with these solutes was a strong reductant itself. While pyridinyl were produced in the case of 2-pyridine methanol, one-electron reduction of 2-pyridine carboxaldehyde led to the formation of PyCHOH radical. The one-electron reduction potential of PyCHOH radicals was estimated by establishing an equilibrium with MV⁺ radical cations to be ?0.6V vs NHE. OH radical reaction with 2-pyridine carboxaldehyde gave an OH adduct, while in the case of 2-pyridine methanol, OH radicals reacted partly by H-abstraction from the ?CH₂OH group. SO₄ ^? radical reaction with 2-pyridine carboxaldehyde produced a species which was reducing in nature. The rate constants for the reaction of e _aq ^? and OH radicals are compared with similar values obtained in the case of other 2-pyridine derivatives to see if there is any electron-inductive effect.     

Dietary Flavonoids: Cardioprotective Potential with Antioxidant Effects and Their Pharmacokinetic,Toxicological and Therapeutic Concerns

Flavonoids comprise a large group of structurally diverse polyphenolic compounds of plant origin and are abundantly found in human diet such as fruits, vegetables, grains, tea, dairy products, red wine, etc. Major classes of flavonoids include flavonols, flavones, flavanones, flavanols, anthocyanidins, isoflavones, and chalcones. Owing to their potential health benefits and medicinal significance, flavonoids are now considered as an indispensable component in a variety of medicinal, pharmaceutical, nutraceutical, and cosmetic preparations. Moreover, flavonoids play a significant role in preventing cardiovascular diseases (CVDs), which could be mainly due to their antioxidant, antiatherogenic, and antithrombotic effects. Epidemiological and in vitro/in vivo evidence of antioxidant effects supports the cardioprotective function of dietary flavonoids. Further, the inhibition of LDL oxidation and platelet aggregation following regular consumption of food containing flavonoids and moderate consumption of red wine might protect against atherosclerosis and thrombosis. One study suggests that daily intake of 100 mg of flavonoids through the diet may reduce the risk of developing morbidity and mortality due to coronary heart disease (CHD) by approximately 10%. This review summarizes dietary flavonoids with their sources and potential health implications in CVDs including various redox-active cardioprotective (molecular) mechanisms with antioxidant effects. Pharmacokinetic (oral bioavailability, drug metabolism), toxicological, and therapeutic aspects of dietary flavonoids are also addressed herein with future directions for the discovery and development of useful drug candidates/therapeutic molecules.     

Volumetric Properties of Aqueous 2-Chloroethanol Solutions and Volumes of Transfer of Some Amino Acids and Peptides from Water to Aqueous 2-Chloroethanol Solutions

Densities and apparent molar volumes of aqueous 2-chloroethanol were determined at temperatures from 15.0 to 34.4°C using digital densimetry. The results of the volumetric measurements have been used to calculate the following thermodynamic quantites at 25°C: V ₂ ^o = 55.05 ± 0.02 cm³-mol^–1, (V ₂ ^o/T)_p = 0.01486 ± 0.00318 cm³-K^–1-mol^–1, and (² V ₂ ^o/T ²)_p = 0.02972 ± 0.00318 cm³-K^–2-mol^–1. Partial molar volumes of transfer from water to 1 mol-dm^–3 2-chloroethanol have also been determined for L-glycine, L-alanine, L-serine, L-glutamic acid, and L-aspartic acid at 35.0°C. The transfer results have been explained in terms of the nature of the interactions of the groups in the solute and solvent. Hydration numbers of L-glycine and L-alanine have also been calculated in aqueous 2-chloroethanol.     

Reactions of oxidizing radicals with 2- and 3-aminopyridines: a pulse radiolysis study

Reactions of OH radicals and some one-electron oxidants with 2-aminopyridine (2-AmPy) and 3-aminopyridine (3-AmPy) were studied in aqueous solutions using pulse radiolysis technique. The OH adduct of 2-AmPy at pH 9 has an absorption maximum at 360 nm along with a weak absorption band in the visible region and was found to be reactive with oxygen. The rate constant for its reaction with O₂ was determined to be 1.0×10⁸ dm³ mol⁻¹ s⁻¹. At pH 4 also, the OH adduct of 2-AmPy has an absorption band at 360 nm. However, there are differences in the absorption at other wavelengths. From the plot of ΔOD vs. pH at 340 nm, the pK_a of the OH adduct was determined to be 6.5. Among the specific oxidants, only SO₄^−√ radicals were able to oxidize 2-AmPy. In the case of 3-aminopyridine (3-AmPy), the transient species formed by OH radical reaction at pH 9 has an absorption maximum at 410 nm with shoulder bands on both the sides. Its absorption spectrum at pH 4 was different indicating the existence of a pK value for the OH adduct. pK_a of 3-AmPy-OH radical adduct species was evaluated to be 5.7. This adduct species was also found to be reactive with oxygen (k=7.6×10⁶ dm³ mol⁻¹ s⁻¹). Specific one-electron oxidants like N₃^√, Br₂^−√ C₂^−√ and SO₄^−√ were able to oxidize 3-AmPy indicating that it is easier to oxidize 3-AmPy as compared to 2-AmPy.