Effect of potassium addition on bimetallic PtSn/θ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for dehydrogenation of propane to propylene

PtSn/θ-Al₂O₃ catalysts with different amounts of K (0.14, 0.22, 0.49, 0.72, and 0.96 wt%) are prepared to investigate the K effects on the PtSn catalyst in propane dehydrogenation (PDH). KPtSn catalyst with 0.xx wt% K, 0.5 wt% Pt and 0.75 wt% Sn is designated as xx-KPtSn. PDH was performed at 873 K and a gas hourly space velocity (GHSV) of 53,000 mL/g_cat h. The temperature-programmed desorption (NH₃-TPD), temperature-programmed reduction (TPR) and CO chemisorption of the KPtSn catalysts with K added revealed the potassium addition blocked the acid sites, promoted the reduction of Sn oxide and decreased the Pt dispersion. The formations of cracking products and higher hydrocarbons on acid sites were suppressed by the K effect of blocking the acid sites. In contrast, K addition at more than 0.72 wt% rather increased cracking products and the amount of coke, resulting in the severe deactivation of catalysts. The high cracking products on the KPtSn catalysts with the high amount of K should not be related to the acid sites, because the acid sites were monotonously decreased with an increase in the amount of K. Instead, the potassium affected the characteristics of PtSn. The interaction between Pt and Sn could be weakened by enriching the reduced Sn, because the K component promoted the reduction of Sn oxide in the TPR experiments. Therefore, the 14-KPtSn catalyst with the low amount of K exhibits the highest stability and selectivity among the prepared KPtSn catalysts due to the compromise of the advantageous (blocking the acid sites) and bad (weakening the interaction between Pt and Sn) effects of the K addition in PDH.     

Hydroxy(tosyloxy)iodo]benzene mediated alpha-azidation of ketones

Reaction of various ketones with [hydroxy(tosyloxy)iodo]benzene (HTIB) followed by treatment of the alpha-tosyloxy ketones thus generated in situ with NaN3 offers a one-pot procedure for the synthesis of alpha-azido ketones. The HTIB used in this conversion may also be generated in situ by using iodosobenzene in combination with p-toluene-sulphonic acid.     

Cycloaddition profile of pentafulvenes with 3-oxidopyrylium betaine: experimental and theoretical investigations

A detailed investigation on the effect of solvent polarity, temperature, and microwave irradiation on periselectivity in cycloaddition reactions of pentafulvenes with 3-oxidopyrylium betaine is described. The base catalyzed generation of 3-oxidopyrylium betaine in CHCl₃ resulted in the exclusive formation of [6+3] adducts. With increase in solvent polarity and temperature, mixtures of [6+3] and [3+2] adducts were formed, where as under microwave irradiation, [3+2] adducts were formed exclusively. The experimental results have been rationalized on the basis of theoretical calculations.     

High‐efficiency polymer solar cells based on phenylenevinylene copolymer with BF2‐azopyrrole complex and CN‐PC70BM with solvent additive

Power conversion efficiency (PCE) of phenylenevinylene‐based copolymer with BF₂ azopyrrole complex (PB)/modified PC₇₀BM, that is, CN‐PC₇₀BM bulk heterojunction solar cells improves from 2.16 to 4.90% using a processing additive and drying condition. The results demonstrate that a processing additive and drying condition provides an effective means to control both the surface roughness and finer interpenetrating networks to enhance the exciton dissociation into free charge carriers, charge transportation, and collection. Taking into the account of simple device fabrication process without thermal annealing, the PCE of the polymer solar cell can further improved by chloronapthalene (CN) additive under the fast drying condition. The average carrier lifetimes extracted from the impedance spectra and found to correlate with measured PCEs. At short circuit conditions and illumination, the average charge carrier lifetime was found vary from 16.8 to 32 μs with power conversion efficiencies ranging from 3.0 to 4.9%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

A proposal for experimental detection of amplitude nth-power squeezing

Recently, in several theoretical investigations, amplitude nth-power squeezing has been studied with n = 2, 3, 4, 5. In the present paper, we give a proposal for experimental detection of amplitude nth-power squeezing using ordinary homodyning with coherent light for arbitrary power n and discuss in detail its theory. The proposed scheme requires only repeated measurements of the factorial moments of number of photons in the light obtained after homodyning, with various shifts of phase of coherent light, and involves no approximations, whatsoever. This has advantage over the method proposed by Shchukin and Vogel [Phys. Rev. A 72 (2005) 043808] in that our method requires only one beam splitter and only one photodetector, and also lesser number of repetitions of experiment with phase-shifted coherent light.     

Long distance atomic teleportation with as good success as desired

Long distance atomic teleportation (LDAT) is of prime importance in long distance quantum communication. Scheme proposed by Bose et al. (1999) in principle enables us to have LDAT using cavity decay. However it gives message state dependent fidelity and success rate. Here, using interaction of entangled coherent states with atom–cavity systems and a two-step measurement, we show how, LDAT can be achieved with unit fidelity and as good success as desired under ideal conditions. The scheme is unique in that, the first measurement predicts success or failure. If success is predicted then second measurement gives perfect teleportation. If failure is predicted the message-qubit remains conserved therefore a second attempt may be started. We found that even in presence of decoherence due to dissipation of energy our scheme gives message state independent success rate and almost perfect teleportation in single attempt with mean fidelity of teleportation equal to 0.9 at long distances. However if first attempt fails, unlike ideal case where message-qubit remains conserved with unit fidelity, in presence of decoherence the message-qubit remains conserved to some degree, therefore mean fidelity of teleportation can be increased beyond 0.9 by repeating the process.     

Synthesis of Quinoline-Based Thieno-Seleno-Phenylquinazolinones

The synthesis of quinoline-substituted phenylquinazolinones containing sulfur and selenium is described. These molecules were isolated from a series of reactions of 2-phenyl-4H-3,1-benzoxazin-4-one with 2-chloro, 2-thieno, and 2-selenoquinoline-3-carbaldehyde hydrazones. The structure of the isolated compounds has been elucidated on the basis of IR, ¹ H NMR, mass spectral, and elemental analysis data.     

The Synthesis and Bioactivity of Dimethyl (2,3- Dihydrobenzo[b][1,4]Dioxin-6-Yl)(Aryl Amino)Methylphosphonates

Abstract

A new series of α-aminophosphonates have been synthesized by a one-pot three-component reaction of 2,3-dihydrobenzo[b][1,4]dioxine-6-carbaldehyde, various amines, and dimethyl phosphite by using nano-TiO₂ as a catalyst under solvent-free conditions at 50°C. The major advantages of the present method are high yields, short reaction times, recyclable catalyst, and solvent-free reaction conditions. Among these new structurally diversified set of α-aminophosphonates, dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(3-nitrophenylamino) methylphosphonate and dimethyl (2,3-dihydrobenzo[b][1,4]dioxin-6-yl)(4-fluoro-3-nitro-phenyl-amino) methylphosphonate have shown higher antioxidant activity in diphenyl picryl hydrazyl (DPPH) scavenging, reducing power assay, and lipid peroxidation methods.     

Synthesis and Bioassay of Ethyl-2- (2-((Diethoxyphosphoryl) (Aryl) Methylamino)Thiazol-4-Yl)-2-(Methoxyimino)Acetates

Abstract

A simple, efficient, and environmentally benign methodology has been accomplished for the synthesis of α-aminophosphonates by one-pot three-component reaction of ethyl-2-amino-α-(methoxy-imino)-4-thiazoleacetate, aldehydes, and diethylphosphite by using Amberlyst-15 as catalyst at room temperature under solvent-free conditions. Their chemical structures were characterized by infrared (IR), NMR (¹H, ¹³C & ³¹P), mass spectral, and elemental analysis. All the title compounds were screened for radical-scavenging activity by 1,1-diphenyl-2-picrylhydrazyl (DPPH), nitic oxide (NO), and hydrogen peroxide (H₂O₂) methods.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements for the following free supplemental files: Additional text and figures.