The effects of mixture preburning on detonation wave propagation

Pressure gain combustion in the form of continuous detonations can provide a significant increase in the efficiency of a variety of propulsion and energy conversion devices. In this regard, rotating detonation engines (RDEs) that utilize an azimuthally-moving detonation wave in annular systems are increasingly seen as a viable approach to realizing pressure gain combustion. However, practical RDEs that employ non-premixed fuel and oxidizer injection need to minimize losses through a number of mechanisms, including turbulence-induced shock-front variations, incomplete fuel-air mixing, and premature deflagration. In this study, a canonical stratified detonation configuration is used to understand the impact of preburning on detonation efficiency. It was found that heat release ahead of the detonation wave leads to weaker shock fronts, delayed combustion of partially-oxidized fuel-air mixture, and non-compact heat release. Furthermore, large variations in wave speeds were observed, which is consistent with wave behavior in full-scale RDEs. Peak pressures in the compression region or near triple points were considerably lower than the theoretically-predicted values for ideal detonations. Analysis of the detonation structure indicates that this deflagration process is parasitic in nature, reducing the detonation efficiency but also leading to heat release far behind the wave that cannot directly strengthen the shock wave. This parasitic combustion leads to commensal combustion (heat release far downstream of the wave), indicating that it is the root cause of combustion efficiency losses.     

Two-Dimensional Supramolecular Polymerization of a Bis-Urea Macrocycle into a Brick-Like Hydrogen-Bonded Network

We report on a dendronized bis-urea macrocycle 1 self-assembling via a cooperative mechanism into two-dimensional (2D) nanosheets formed solely by alternated urea-urea hydrogen bonding interactions. The pure macrocycle self-assembles in bulk into one-dimensional liquid-crystalline columnar phases. In contrast, its self-assembly mode drastically changes in CHCl₃ or tetrachloroethane, leading to 2D hydrogen-bonded networks. Theoretical calculations, complemented by previously reported crystalline structures, indicate that the 2D assembly is formed by a brick-like hydrogen bonding pattern between bis-urea macrocycles. This assembly is promoted by the swelling of the trisdodecyloxyphenyl groups upon solvation, which frustrates, due to steric effects, the formation of the thermodynamically more stable columnar macrocycle stacks. This work proposes a new design strategy to access 2D supramolecular polymers by means of a single non-covalent interaction motif, which is of great interest for materials development.     

Double cascade reactions based on the Barbas dienamine platform: highly stereoselective synthesis of functionalized cyclohexanes for cardiovascular agents

The amino acid proline catalyzed the three- and five-component cascade olefination-Diels-Alder-epimerization and olefination-Diels-Alder-epimerization-olefination-hydrogenation reactions of readily available precursors enones 1a-i, arylaldehydes 2a-k, alkyl cyanoacetates 3a-e and Hantzsch ester 9 to furnish highly substituted prochiral 1-cyano-4-oxo-2,6-diaryl-cyclohexanecarboxylic acid alkyl esters 6 and 1-cyano-4-(cyano-alkoxycarbonyl-methyl)-2,6-diaryl-cyclohexanecarboxylic acid alkyl esters 10 in a highly diastereoselective fashion with excellent yields. Prochiral cis-isomers 6 are excellent starting materials for the synthesis of cardiovascular agents and hypnotic active products.     

Hydroxy(tosyloxy)iodo]benzene mediated alpha-azidation of ketones

Reaction of various ketones with [hydroxy(tosyloxy)iodo]benzene (HTIB) followed by treatment of the alpha-tosyloxy ketones thus generated in situ with NaN3 offers a one-pot procedure for the synthesis of alpha-azido ketones. The HTIB used in this conversion may also be generated in situ by using iodosobenzene in combination with p-toluene-sulphonic acid.     

Recent developments in the synthesis of five- and six-membered heterocycles using molecular iodine

Heterocyclic scaffolds represent the key structural subunits of many biologically active compounds. Over the last few years iodine-mediated reactions have been extensively studied due to their low cost and eco-friendliness. This Review covers advances in the field of iodine-mediated synthesis of heterocyclic compounds since 2006, especially with an emphasis on mechanisms of ring formation. In this article, syntheses of different heterocycles are classified based on the manipulation of functional groups.     

Effect of potassium addition on bimetallic PtSn/θ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst for dehydrogenation of propane to propylene

PtSn/θ-Al₂O₃ catalysts with different amounts of K (0.14, 0.22, 0.49, 0.72, and 0.96 wt%) are prepared to investigate the K effects on the PtSn catalyst in propane dehydrogenation (PDH). KPtSn catalyst with 0.xx wt% K, 0.5 wt% Pt and 0.75 wt% Sn is designated as xx-KPtSn. PDH was performed at 873 K and a gas hourly space velocity (GHSV) of 53,000 mL/g_cat h. The temperature-programmed desorption (NH₃-TPD), temperature-programmed reduction (TPR) and CO chemisorption of the KPtSn catalysts with K added revealed the potassium addition blocked the acid sites, promoted the reduction of Sn oxide and decreased the Pt dispersion. The formations of cracking products and higher hydrocarbons on acid sites were suppressed by the K effect of blocking the acid sites. In contrast, K addition at more than 0.72 wt% rather increased cracking products and the amount of coke, resulting in the severe deactivation of catalysts. The high cracking products on the KPtSn catalysts with the high amount of K should not be related to the acid sites, because the acid sites were monotonously decreased with an increase in the amount of K. Instead, the potassium affected the characteristics of PtSn. The interaction between Pt and Sn could be weakened by enriching the reduced Sn, because the K component promoted the reduction of Sn oxide in the TPR experiments. Therefore, the 14-KPtSn catalyst with the low amount of K exhibits the highest stability and selectivity among the prepared KPtSn catalysts due to the compromise of the advantageous (blocking the acid sites) and bad (weakening the interaction between Pt and Sn) effects of the K addition in PDH.     

Studies on the Synthesis and Characterization of Pd?TiO2?SiO2 Nanocomposite for Electroanalytical Applications

A nanocomposite of Pd? TiO₂? SiO₂ is developed through a sol‐gel process from the reaction products of titanium isopropoxide followed by mixing the same with palladium linked 3‐glycidoxypropyltrimethoxysilane. The reaction product is sonicated and calcinated to obtain the nanocomposite of Pd? TiO₂? SiO₂. The calcination at 600 °C yielded an amorphous structure whereas at 900 °C it resulted into a nanocrystalline structure. The nanocomposite of palladium was further characterized by TEM, XRD, IR and EDS. The material acts as an efficient electrocatalyst. Electrocatalysis of ascorbic acid is observed at 0.1 V vs. Ag/AgCl, shows linearity between 1 µM and 1 mM in 0.1 M phosphate buffer (pH 7.0).     

Reactions of titanium(IV) isopropoxide with aliphatic and aromatic hydroxy esters,part I. 5-, 6-, 7- and 8-coordinate titanium(IV) complexes

Summary Reactions of titanium(IV) isopropoxide with ethyl 1-hydroxycyclohexylacetate, ethyl 2-hydroxy-2-arylpropionate, ethyl 2-hydroxy-2-arylbutyrate and ethyl 2-hydroxy-2-arylhydrocinnamate have been studied in dry benzene in different molar ratios under strictly anhydrous conditions. The Ti(OPr-i)₄-_nL_n type compounds, where L = hydroxy ester and n = 1 to 4, have been isolated and characterised by elemental analysis, molecular weight, i.r. and n.m.r. spectral studies. These products may be distilled unchanged under reduced pressure.Reprints of this are not available.     

The complexes of aluminium,gallium, and indium with calmagite: Evaluation of stepwise stability constants

Summary Calmagite [1-(1-hydroxy-4-methyl-2-phenyl azo)-2-naphthol sulphonic acid], dissociates in two steps. It forms violet complexes with Al³⁺, Ga³⁺ and In³⁺. The stepwise proton-ligand stability constants of calmagite and stepwise metal-ligand stability constants of these complexes were evaluated by potentiometric titration technique ofBjerrum andIrving andRossotti. The order of the stabilities of complexes is In³⁺ > Ga³⁺ > > Al³⁺.

---

Zusammenfassung Camalgit [1-(1-Hydroxy-4-methyl-2-phenylazo)-2-naphtholsulfonsäure] dissoziiert in zwei Stufen und bildet violette Komplexe mit Al(III), Ga(III) und In(III). Die Konstanten der Dissoziationsstufen der freien Säure und die der Metallkomplexe wurden potentiometrisch nachBjerrum bzw.Irving undRossotti ermittelt. Die Stabilität der Komplexe nimmt in der Reihe In(III) > Ga(III) > Al(III) ab.