P and H NMR studies of the transesterification polymerization of polyphosphonate oligomers

Polymeric phosphonate esters are an interesting class of organophosphorus polymers because both the polymer backbone and phosphorus substituents can be modified. These polymers have been prepared by ring-opening polymerizations of cyclic phosphites, stoichiometric polycondensations of dimethyl phosphonate with diols in conjunction with diazomethane treatment and by transesterification of polyphosphonate oligomers. Our initial attempts to prepare high molecular weight polymeric phosphonate esters by the transesterification methods were unsuccessful. Results indicate that the reactions of dimethyl phosphonate with diols to form polyphosphonate oligomers with only methyl phosphonate end groups are plagued by a serious side reaction that forms phosphonic acid end groups. These end groups do not participate in the transesterification reaction and limit the molecular weights of the polymers that can be obtained. The phosphonic acid end groups can be converted into reactive methyl phosphonate end groups by treatment with diazomethane, however diazomethane is explosive and the polymerization is slow. An alternative route for the production of high molecular weight polymers is the transesterification of the 1,12-bis(methyl phosphonato)dodecane, formed by the reaction of excess dimethyl phosphonate and 1,12-dodecanediol, with a Na₂CO₃ promoter. This allows polymers with molecular weights of up to 4.5×10⁴ to be prepared, and no phosphonic acid end groups are observed in these polymers. Thermal analyses of the poly(1,12-dodecamethylene phosphonate) have shown that this polymer has reasonable thermal stability (onset of thermal decomposition at 273 °C). This polymer also undergoes a cold crystallization process at 15 °C similar to that which has been observed in some polyesters, polyamides and elastomers.     

Synthesis of some new 4-imino-3,5,7-trisubstituted-pyrido[2,3-d]pyrimidine-2(1H)-thiones

The synthesis of 4-imino-3,5,7-trisubstituted-pyrido[2,3-d]pyrimidine-2(1H)-thiones is described. The elemental analysis, ir and nmr spectral data confirm the structure of the products.     

CuFe2O4 nanomaterials: Current discoveries in synthesis,catalytic efficiency in coupling reactions,and their environmental applications

In the last few decades, there has been enormous growth in ferrite nanoparticles. Magnetic, optical, and electrical properties of ferrites gain consideration due to their use in various applications such as rechargeable lithium batteries, medical diagnostics, solar energy devices, and so forth. A vast increase in interest in ferrite nanoparticles has led them to be used as catalysts in various applications as they possess a large surface area-to-volume ratio. Furthermore, iron-based magnetic characteristics make it simple to retrieve catalysts by using an external magnet. Iron's catalytic potential, however, is far less than copper's. Therefore, the catalytic scope is substantially increased by substituting copper within the crystal lattice. Recently copper ferrite nanoparticles have caught the interest of numerous researchers due to low-cost magnetic material, stability under diverse conditions, and ease at which catalyst can be retrieved using an external magnetic field and utilized repeatedly. This review of data from year 2010 through 2022 emphasizes the synthesis method, structure, application in dyes degradation, catalytic potential in the number of coupling reactions, recyclability, and reusability of the magnetic catalyst.     

Boron-Thioketonates: A New Class of S,O-Chelated Boranes as Acceptors in Optoelectronic Devices

Development of new n-type semiconductors with tunable band gap and dielectric constant has significant implication in dissociating bound charge carrier relevant for demonstrating high performance optoelectronic devices. Boron-β-thioketonates (MTDKB), analogues to boron-β-diketonates containing a sulfur atom in the framework of β-diketones were synthesized. Bulk transport measurement exhibited an outstanding bulk electron mobility of ≈0.003 cm² V⁻¹ s⁻¹, which is among the best values reported till date in these class of semiconducting materials and correspondingly a single junction photo responsivity of upto 6 mA W⁻¹ was obtained. This new family of O,S-chelated boron compounds exhibited luminescence in the far red/near-infrared region. The remarkable red shift of 89 nm (fluorescence) observed for 4 a in comparison with analogues boron-β-diketonate signifies the importance of sulfur in these molecules. MTDKBs with amine functionality have also been investigated as an ON/OFF fluorescent sensor.     

Tuning the morphological properties of cellulose aerogels: an investigation of salt-mediated preparation

Cellulose - In this study, alkali and alkaline earth metal chlorides with different cationic radii (LiCl, NaCl, and KCl, MgCl2, and CaCl2) were used to gain insight into the behavior of cellulose...     

Spatial dependency of the groundwater uranium in the alluvial soil region of Gunnaur,India

Journal of Radioanalytical and Nuclear Chemistry - GIS based groundwater uranium and other physico-chemical parameters pH, electrical conductivity, oxidation reduction potential, temperature,...     

Clickable polyurethanes based on s‐triazine ring containing aromatic diisocyanate bearing pendent alkyne group: Synthesis and postmodification

A new s‐triazine ring containing aromatic diisocyanate bearing a pendent alkyne group, namely, 2,4‐bis(4‐isocyanatophenoxy)?6‐(prop‐2‐yn‐1‐yloxy)?1,3,5‐triazine was synthesized and reacted with various diols viz., 1,10‐decanediol, tetraethylene glycol and polyethylene glycols in the presence of dibutyltin dilaurate as the catalyst to obtain a series of linear polyurethanes. The selected polyurethanes possessing pendent alkyne groups were postmodified with chemically diverse azides viz., 1‐(azidomethyl)benzene, 1‐(azidomethyl)pyrene, and methoxy end‐caped poly(ethylene glycol) azide via copper‐catalysed azide‐alkyne Huisgen 1,3‐dipolar cycloaddition. FTIR and ¹H NMR spectra indicated quantitative click reaction. UV–vis and fluorescence spectroscopic analysis confirmed complete incorporation of pyrenyl groups indicating the formation of fluorescence active polyurethane by postmodification with 1‐(azidomethyl)pyrene. TG analysis of polyurethanes indicated two stage weight loss and their thermal stability, as judged by T ₁₀ values, was governed by weight percent of urethane linkages. The water contact angle measurements revealed improved wettability with increased content of PEG either in the backbone of polyurethanes or as grafted chains. DLS and TEM studies confirmed that certain polyurethanes possessing PEG segments displayed self‐assembly in aqueous solution, which was further supported by pyrene encapsulation studies using UV–vis spectroscopy. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1008–1020     

Charge distribution study in the alpha-particle induced fission of232Th+ effect of excitation energy

The fractional cumulative yields of¹³⁵I,¹³⁸Xe and¹⁴⁰Ba in the particle (30 MeV) induced fission of²³²Th have been determined following the growth and decay of^135gXe,^138gCs and¹⁴⁰La, respectively, employing high resolution gamma ray spectroscopy. The fractional cumulative yield values are 0.766±0.02, 0.813±0.03 and 0.991±0.004, respectively. The analysis of the data indicates a broader width of charge distribution () compared to the normally observed =0.56±0.06 for thermal neutron fission of²³⁵U.     

A New Approach for the Synthesis of Miktoarm Star Polymers Through a Combination of Thiol–Epoxy “Click” Chemistry and ATRP/Ring‐Opening Polymerization Techniques

A new approach was developed for synthesis of certain A₃B₃‐type of double hydrophilic or amphiphilic miktoarm star polymers using a combination of “grafting onto” and “grafting from” methods. To achieve the synthesis of desired miktoarm star polymers, acetyl protected poly(ethylene glycol) (PEG) thiols (M_n = 550 and 2000 g mol^?1) were utilized to generate A₃‐type of homoarm star polymers through an in situ protective group removal and a subsequent thiol–epoxy “click” reaction with a tris‐epoxide core viz. 1,1,1‐tris(4‐hydroxyphenyl)ethane triglycidyl ether. The secondary hydroxyl groups generated adjacent to the core upon the thiol–epoxy reaction were esterified with α‐bromoisobutyryl bromide to install atom transfer radical polymerization (ATRP) initiating sites. ATRP of N‐isopropylacrylamide (NIPAM) using the three‐arm star PEG polymer fitted with ATRP initiating sites adjacent to the core afforded A₃B₃‐type of double hydrophilic (PEG)₃[poly(N‐isopropylacrylamide)] (PNIPAM)₃ miktoarm star polymers. Furthermore, the generated hydroxyl groups were directly used as initiator for ring‐opening polymerization of ε‐caprolactone to prepare A₃B₃‐type of amphiphilic (PEG)₃[poly(ε‐caprolactone)]₃ miktoarm star polymers. The double hydrophilic (PEG)₃(PNIPAM)₃ miktoarm star polymers showed lower critical solution temperature around 34 °C. The preliminary transmission electron microscopy analysis indicated formation of self‐assembly of (PEG)₃(PNIPAM)₃ miktoarm star polymer in aqueous solution. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 146–156     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597