Storage stability of ketones on carbon adsorbents

Activated coconut carbon constitutes the more widely used sorbent for preconcentration of volatile organic compounds in sampling workplace air. Water vapour is always present in the air and its adsorption on the activated carbon surface is a serious drawback, mainly when sampling polar organic compounds, such as ketones. In this case, the recovery of the compounds diminishes; moreover, ketones can be decomposed during storage. Synthetic carbons contain less inorganic impurities and have a lower capacity for water adsorption than coconut charcoal. The aim of this work was to evaluate the storage stability of various ketones (acetone, 2-butanone, 4-methyl-2-pentanone and cyclohexanone) on different activated carbons and to study the effect of adsorbed water vapour under different storage conditions. The effect of storage temperature on extraction efficiencies was significant for each ketone in all the studied sorbents. Recovery was higher when samples were stored at 4 degrees C. The results obtained for storage stability of the studied ketones showed that the performance of synthetic carbons was better than for the coconut charcoals. The water adsorption and the ash content of the carbons can be a measure of the reactive sites that may chemisorb ketones or catalize their decomposition. Anasorb 747 showed good ketone stability at least for 7 days, except for cyclohexanone. After 30-days storage, the stability of the studied ketones was excellent on Carboxen 564. This sorbent had a nearly negligible ash content and the adsorbed water was much lower than for the other sorbents tested.     

Partially pyrolyzed poly(dimethylsiloxane)‐based networks: Thermal characterization and evaluation of the gas permeability

In this investigation, the preparation and characterization of partially pyrolyzed membranes based on poly(dimethylsiloxane) (PDMS) are described. These membranes were obtained by the crosslinking of silanol‐terminated PDMS with multifunctional nanoclusters derived from the reaction of pentaerythritoltriacrylate with 2‐aminoethyl‐3‐aminopropyltrimethoxysilane and the in situ polycondensation of tetraethylortosilicate, followed by the thermal treatment of the resulting membranes at different temperatures. The partially pyrolyzed membranes were characterized with infrared spectroscopy, thermogravimetry, elemental analyses, dynamic mechanical analysis, small‐angle X‐ray scattering, and scanning electron microscopy. The membranes exhibited improvements in the thermal stability and mechanical strength. Even with distinct compositions with respect to the Si/O and Si/C ratios, the flexibility of these materials was maintained. The flux rates of the gases through the membranes were measured for N₂, H₂, O₂, CH₄, and CO₂, at 25 °C. The permeability of the membranes changed with increases in the pyrolysis and oxidation temperatures. These membranes could be described as PDMS chains separated by inorganic clusters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 299–309, 2007.     

Anti-herpes activity of polysaccharide fractions from Stevia rebaudiana leaves

Abstract

The antiviral potential of natural polysaccharide compounds has been demonstrated, especially against enveloped viruses and members of the Herpesviridae family. Two polysaccharide fractions obtained from Stevia rebaudiana (Bertoni) leaves, that were active against Herpes simplex virus type 1 (HSV-1) were studied to investigate their mode of action. Both polysaccharides - SFW (crude faction) and SSFK (homogeneous alkaline fraction) - exerted antiviral effects on the initial stages of HSV-1 infection by inhibiting viral adsorption and penetration. When added after virus internalization, both fractions decreased plaque size. The effect of the fractions was confirmed by investigating viral glycoprotein expression. Based on the mode of action of the polysaccharides demonstrated in the present work and on their selectivity index, the polysaccharides obtained from S. rebaudiana could be an alternative treatment of infections caused by HSV-1.     

Using Bismuth Vanadate/Copper Oxide Nanocomposite as Photoelectrochemical Sensor for Naproxen Determination in Sewage

Conventional sewage treatment plants are not usually designed to remove emerging contaminants, and this shortcoming leads to the discharge of pharmaceuticals, among other emerging pollutants, into the environment. The present work reports the development of BiVO₄/CuO‐based photoelectrochemical sensor for the determination of naproxen in sewage samples. Morphological characterizations were carried out by X‐ray diffraction and Scanning electron microscopy. The band gap energy of the nanocomposite material was calculated by Tauc plots using the data obtained from diffuse reflectance spectroscopy analysis. The sensor presented analytical signal during the photocurrent generation simultaneously with the oxidation of naproxen on the working electrode. The sensor responses were found to be proportional to the increase in naproxen concentration in the linear range of 5 nmol L^?1 to 480 nmol L^?1, R²=0.996, with a limit of detection of 5 nmol L^?1. The presence of naproxen in sewage samples was successfully determined with recovery percentages above 95 %.     

Sintering of glasses in the system RO–Al2O3–BaO–SiO2 (R=Ca, Mg, Zn) studied by hot-stage microscopy

Glass–ceramics for sealing solid oxide fuel cells (SOFCs) were developed by sintering and crystallization of the powdered glass seal. The non-isothermal sintering kinetics and crystallization kinetics were studied for four glasses in the system 50SiO₂·(45−x)BaO·xRO·5Al₂O₃ (R=Ca, Mg, Zn and x=0, 15) (mol%). Hot-stage microscopy (HSM) and differential thermal analysis (DTA) measurements demonstrated that it is possible to first sinter and then crystallize these glasses obtaining glass–ceramic seals with thermal expansion coefficients in the range 9–12×10⁻⁶ K⁻¹.

The non-isothermal sintering kinetics was analyzed by computer simulations using a previously reported model of sintering for polydispersed glass powders which takes into account the particle size distribution, surface energy and viscosity. Good agreement was found between the measured kinetics with HSM and the calculated kinetics for all glasses.     

Synthesis of unexpected six-membered imides by free-radical carbocyclisation on carbohydrate templates

Free-radical reactions of amido-esters anchored to a carbohydrate derived from methyl α-d-glucopyranoside afforded unexpected six-membered cyclic imides. Their structures were elucidated by ESI-MS/MS and NMR spectral analyses, and a mechanism for the formation of these imides is proposed.     

Vitamin A and vitamin E interaction behavior on chitosan microspheres

Chitosan is a biodegradable natural polymer with great potential for pharmaceutical applications due to its biocompatibility, high charge density, and non-toxicity. In this study, chitosan microspheres were successfully prepared by an adapted method of coagulation/dispersion. The degree of deacetylation of chitosan powder was obtained by NMR ¹H and FTIR techniques. Chitosan powder and chitosan microspheres were characterized by BET surface area and scanning electron microscopy (SEM). The interactions among the chitosan microspheres and the vitamins A and E were characterized by FTIR. In order to evaluate the ability of interaction of vitamin A and vitamin E with the chitosan microspheres, the thermodynamic parameters were followed by calorimetric titration. Different experimental approaches were applied, such as adsorption isotherms, kinetics and thermodynamics studies. The obtained results showed that the interactions of chitosan microspheres with the vitamins were spontaneous, enthalpically and entropically favorable, indicating that the chitosan microspheres can be used with success in the controlled release of these vitamins.     

On a General Class of Nonlocal Equations

Motivated by recent developments in cosmology and string theory, we introduce a functional calculus appropriate for the study of non-linear nonlocal equations of the form f(Δ)u = U(x, u(x)) on Euclidean space. We prove that under some technical assumptions, these equations admit smooth solutions. We also consider nonlocal equations on compact Riemannian manifolds, and we prove the existence of smooth solutions. Moreover, in the Euclidean case we present conditions on f which guarantee that the solutions we find are, in fact, real-analytic.     

Development of new high transparent hybrid organic–inorganic monoliths with surface engraved diffraction pattern

Flexible hybrid xerogels bringing together high optical transparency up to 96%, low shrinkage down to 5.5%, very smooth surface (average roughness of about 0.3 nm) and thermal stability up to 200 °C were achieved as a result of the optimization of sol‐gel preparative method and a new combination of sol‐gel precursors. Two types of hybrid materials (hereafter referred, respectively, as urea‐silicate and amino‐alcohol‐silicate gels) were synthesized in this work. The shrinkage and the transparency of these materials have been drastically improved by using two different derived siloxanes (3‐isocyanate propyltriethoxysilane and 3‐glycidoxypropyltrimethoxysilane) and two amine‐terminated polyether precursors with different molecular weights. A drying process was implemented to minimize yellowing of prepared samples. Under these conditions, we were able to efficiently reproduce a well‐defined imprinted pattern at materials surface by using an original casting mould. The study of the diffraction characteristics of the obtained grating revealed a good reproducibility of the imprinted grating that shows to be comparable with the original mould. The developed methodology opens the possibility to produce diffraction lenses with a wide range of forms by a simple method based on sol‐gel process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012