Effect of Discharge Plasma Potential on Diffusion Plasma Parameters Controlled by a Mesh Grid in a Double Plasma Device

The plasma region under investigation is separated from the discharge region by a mesh grid. Plasma potential and electron number densities and electron temperatures under bi‐Maxwellian approximation for electron distribution function of the multi‐dipole argon plasma are measured. The cold electrons in the diffusion region are produced by local ionization. The hot electrons are the ionizing electrons behaving as Maxwellian. The electron trapping process in the discharge region is produced by potential well due to positive plasma potential with respect to the anode and by a repulsive grid. The dependence of ratios of the density of the hot to the cold electrons N_E (=N_eh/N_ec) and hot to cold electron temperature T(=T_eh/T_ec) in the diffusion region on the depth of the potential well has been investigated. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Directional couplers in trapped image guide configuration

Dispersion characteristics and wave impedance of trapped coupled image guides are computed by using mode matching techniques. Dispersion curves for trapped coupled image guide are plotted for various dielectric materials and dimensional parameters. The hybrid directional couplers in the above configuration have been theoretically designed by computing the normalization propagation constant.     

Long distance atomic teleportation with as good success as desired

Long distance atomic teleportation (LDAT) is of prime importance in long distance quantum communication. Scheme proposed by Bose et al. (1999) in principle enables us to have LDAT using cavity decay. However it gives message state dependent fidelity and success rate. Here, using interaction of entangled coherent states with atom–cavity systems and a two-step measurement, we show how, LDAT can be achieved with unit fidelity and as good success as desired under ideal conditions. The scheme is unique in that, the first measurement predicts success or failure. If success is predicted then second measurement gives perfect teleportation. If failure is predicted the message-qubit remains conserved therefore a second attempt may be started. We found that even in presence of decoherence due to dissipation of energy our scheme gives message state independent success rate and almost perfect teleportation in single attempt with mean fidelity of teleportation equal to 0.9 at long distances. However if first attempt fails, unlike ideal case where message-qubit remains conserved with unit fidelity, in presence of decoherence the message-qubit remains conserved to some degree, therefore mean fidelity of teleportation can be increased beyond 0.9 by repeating the process.     

Effect of barium titanate nanoparticles of different particle sizes on electro-optic and dielectric properties of ferroelectric liquid crystal

A comparative study of two different particle sizes of ferroelectric barium titanate (BaTiO₃) nanoparticles as a dopant on the molecular structure, spontaneous polarization and dielectric behavior of a pure ferroelectric liquid crystal 6F₆T have been studied. It has been found that there is a remarkable decrease in isotropic temperature of both doped samples as compared to the pure 6F₆T sample. The spontaneous polarization also decreases for both the doped samples and the reduction is more pronounced in case of the dopant with large particle size. The dielectric spectroscopy confirms the presence of soft mode as well as Goldstone mode and also shows the decrease in the value of dielectric permittivity ?' as a function of frequency for both doped samples. The improvised properties of liquid crystal host doped with BaTiO₃ nanoparticles mainly depend upon the synthesis method of nanoparticles and also upon the particle size of dopant.     

Growth mechanism and optical property of ZnO nanoparticles synthesized by sonochemical method

ZnO nanoparticles have been synthesized by ultrasonic irradiation of an aqueous-alcoholic/aqueous-alcoholic-ethylenediamine (EDA) solutions of zinc nitrate and sodium hydroxide. ZnO nanoparticles possess hexagonal wurtzite structures and they exhibit special photoluminescence properties with a red-shift of 22 nm in UV emission band. It is found that the ultrasonic irradiation time and the solvents both influence the growth mechanism and optical properties of ZnO nanoparticles. The possible growth mechanism of ZnO nanoparticles formation by sonochemical method has been tried to discuss.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Multiple parameter tuning of the bandwidth, wavelength and attenuation of a fiber-based acousto-optic tunable filter

In this paper we presented a method, which will allow multiple parameter control of the 3-dB bandwidth, center notch wavelength and attenuation level in a fiber-based acousto-optic tunable filter (AOTF). The method basically involves the variation of the interaction length, RF frequency and RF power on a single-fiber device to achieve multiple parameters tuning of the optical filter. The acousto-optic (AO) interaction inside a single-mode fiber (SMF) was studied theoretically and experimentally.     

Experimental studies on the microstructure and hardness of laser-treated steel specimens

An experimental investigation with 5 kW CW CO₂ laser system was carried out to study the effects of different laser and process parameters on the microstructure and hardness of carbon steel specimen with varying carbon percentage. The laser beam is allowed to scan on the surface of the work piece varying the power (1.1–2.5 kW) and traverse speed (6–15 mm/s) at two different spot sizes using TEM_01* mode laser beam. The most hardenable microstructure achieved in case of three grades of carbon steel and the most influencing parameter on the value of hardness are reported. Besides the above study, some multipass operations are also carried out to recommend an appropriate gap between consecutive passes.