New Effective Synthetic Method for Preparation of N,N-Dichlorocarbamates

A rapid, efficient, economical, and easy-to-scale method for the effective conversion of carbamates to corresponding N,N-dichlorocarbamates by using sodium hypochlorite in acidic medium has been described. N,N-Dichlorocarbamates were obtained in quantitative yield through a simple workup in reduced reaction time.

Understanding the absorption and emission spectra of borondipyrromethene dye and its substituted analogues

Borondipyrromethene (BODIPY) dye possesses a bright and long wavelength emitting fluorescent character with a wide spectral range from visible to near infrared region. In the present work, the spectral properties of BODIPY dyes were analyzed using ab intio and density functional theory methods. The ground and excited state geometries of BODIPY and its substituted analogues in chloroform medium, were optimized using the density functional theory (DFT) and singly excited configuration interaction (CIS) methods. Based on the ground and excited state geometries, the absorption and emission spectra have been calculated using time-dependent density functional theory (TDDFT) method. The TDDFT calculations have been performed using hybrid exchange correlation functionals B3LYP and M06-HF and long-range separated functionals LC-BLYP, LC-BOP, LC-PBE, LC-PBE0 and CAM-B3LYP. The solvent phase calculations were carried out using polarizable continuum model (PCM). The TDDFT investigation reveals that the substitution of acceptor, donor–donor, donor–acceptor–donor and phenyl group in BODIPY dye influence the absorption and emission spectra significantly.     

Opto-electronic properties of low band gap fused-ring thieno[3,4-b]pyrazine analogues – A theoretical study

The structural, optical and ionic properties of thieno[3,4-b]pyrazine (TP) analogues have been studied using quantum chemical methods. The density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods were employed to optimise the ground- and excited-state geometries of TP analogues. Based on the ground- and excited-state geometries, the absorption and emission spectra have been calculated by using TD-DFT method with 6-311G(d,p) basis set. All the calculations were carried out in gas phase and in acetonitrile and chloroform medium. The solvent-phase calculations were performed using the polarisable continuum model (PCM). It has been observed that the effect of medium on the calculated absorption and emission spectra of these analogues is negligible. The calculated absorption and emission spectra are in good agreement with the available experimental results. This theoretical investigation shows that the fused-ring thieno[3,4-b]pyrazine analogues dibenzo[f,h]thieno[3,4-b]quinoxalines and thieno[3′,4′:5,6]pyrazino[2,3-f][1,10] phenanthroline have lower band gap than the thieno[3,4-b]pyrazine. Hence, these analogues can be used for the production of low band gap conjugated polymers.     

Ruthenium(II)-catalyzed synthesis of 2-arylbenzimidazole and 2-arylbenzothiazole in water

Transition Metal Chemistry - Benzimidazoles/benzothiazoles are heterocyclic compounds which contain a five membered heteroatom and a benzene ring. They constitute a crucial structural unit of...     

Synthesis,Biological Evaluation,and Molecular Docking Studies of Some N‐thiazolyl Hydrazones and Indenopyrazolones

Two new series of N‐thiazolyl hydrazones ( 3a – h ) and indenopyrazolones ( 4a – h ) were synthesized by the reaction of various 2‐acyl‐(1H)‐indene‐1,3(2H)‐diones, thiosemicarbazide, and phenacyl bromide/substituted phenacyl bromides. The in vitro antimicrobial activity of these synthesized compounds was assayed against four bacteria, namely, Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa, and two fungi, namely, Candida albicans and Aspergillus niger, by employing serial dilution method. Ciprofloxacin and fluconazole were used as antibacterial and antifungal reference drugs, respectively. Results of antimicrobial assay showed that the tested compounds have broad range of activity. The compounds 3h and 4a against C. albicans displayed more potency than fluconazole whereas 3b and 3c against B. subtilis showed activity comparable with ciprofloxacin. The synthesized indenopyrazolones ( 4a – h ) were evaluated for their in vitro antioxidant activity by 2,2‐diphenyl‐1‐picrylhydrazyl radical scavenging assay using ascorbic acid as reference. Compound 4b exhibited the highest 2,2‐diphenyl‐1‐picrylhydrazyl radical scavenging with IC₅₀ value 33.14 μg/mL. The observed results of antimicrobial activity were supported by molecular docking study performed to understand the binding interaction of hydrazones ( 3a – h ) and indenopyrazolones ( 4a – h ) with lanosterol 14α‐demethylase.     

Permutation Polyhedra and Minimisation of the Variance of Completion Times on a Single Machine

We consider the problem of minimising variance of completion times when n-jobs are to be processed on a single machine. This problem is known as the CTV problem. The problem has been shown to be difficult. In this paper we consider the polytope P _n whose vertices are in one-to-one correspondence with the n! permutations of the processing times [p ₁, p ₂, ..., p _n]. Thus each vertex of P _n represents a sequence in which the n-jobs can be processed. We define a V-shaped local optimal solution to the CTV problem to be the V-shaped sequence of jobs corresponding to which the variance of completion times is smaller than for all the sequences adjacent to it on P _n. We show that this local solution dominates V-shaped feasible solutions of the order of 2 ^n–3 where 2 ^n–2 is the total number of V-shaped feasible solutions.Using adjacency structure an P _n, we develop a heuristic for the CTV problem which has a running time of low polynomial order, which is exact for n 10, and whose domination number is (2 ^n–3). In the end we mention two other classes of scheduling problems for which also ADJACENT provides solutions with the same domination number as for the CTV problem.     

Quantum chemical studies on tautomerism of barbituric acid in gas phase and in solution

Ab initoand density functional theory (DFT) methods were used to study the tautomers of barbituric acid in the gas phase and in a polar medium. In the gas phase, the tautomers were optimized at the HF/6-31G^*, MP2/6-31G^*and B3LYP/6-31G^*, B3PW91/6-31G^*levels of theory. The self-consistent reaction field theory (SCRF) at the HF/6-31G^*level of theory has been used to optimize the tautomers in a polar medium. The relative stability of the tautomers was compared in the gaseous and polar mediums. The ability of maximum hardness principle to predict the stable tautomer has been studied. The ¹³C-NMR chemical shift for carbon atoms in the tautomers was calculated and the results are discussed.     

Electrospray ionization-ion mobility spectrometry: a rapid analytical method for aqueous nitrate and nitrite analysis

This paper reports the first example of electrospray ionization (ESI) for the separation and detection of anions in aqueous solutions by ion mobility spectrometry (IMS). Standard solutions of arsenate, phosphate, sulfate, nitrate, nitrite, chloride, formate, and acetate were analyzed using ESI-IMS and distinct peak patterns and reduced mobility constants (K(0)) were observed for respective anions. Real world water samples were analyzed for nitrate and nitrite to determine the feasibility of using ESI-IMS as a rapid analytical method for monitoring nitrate and nitrite in water systems. The data showed satisfactory correlation between the measured value ([similar]0.16 ppm) and the reported maximum nitrate-nitrogen concentration (0.2 ppm) found in a local drinking water system. For on-site measurement applications, direct sample introduction and air as an alternate drift gas to nitrogen were evaluated. The identities of the nitrite and nitrate mobility peaks were verified by comparison of reduced mobility constants with mass identified nitrate and nitrite ions reported in literature. In the mixing ratio, a linear dynamic range of 3 orders of magnitude and instrument detection limits of 10 ppb for nitrate and 40 ppb for nitrite were obtained. The calibration curves showed r(2) value of 0.98 and slope of 0.06 for nitrate and r(2) value of 0.99 and slope of 0.11 for nitrite.     

Ion mobility-mass spectrometry

This review article compares and contrasts various types of ion mobility-mass spectrometers available today and describes their advantages for application to a wide range of analytes. Ion mobility spectrometry (IMS), when coupled with mass spectrometry, offers value-added data not possible from mass spectra alone. Separation of isomers, isobars, and conformers; reduction of chemical noise; and measurement of ion size are possible with the addition of ion mobility cells to mass spectrometers. In addition, structurally similar ions and ions of the same charge state can be separated into families of ions which appear along a unique mass-mobility correlation line. This review describes the four methods of ion mobility separation currently used with mass spectrometry. They are (1) drift-time ion mobility spectrometry (DTIMS), (2) aspiration ion mobility spectrometry (AIMS), (3) differential-mobility spectrometry (DMS) which is also called field-asymmetric waveform ion mobility spectrometry (FAIMS) and (4) traveling-wave ion mobility spectrometry (TWIMS). DTIMS provides the highest IMS resolving power and is the only IMS method which can directly measure collision cross-sections. AIMS is a low resolution mobility separation method but can monitor ions in a continuous manner. DMS and FAIMS offer continuous-ion monitoring capability as well as orthogonal ion mobility separation in which high-separation selectivity can be achieved. TWIMS is a novel method of IMS with a low resolving power but has good sensitivity and is well intergrated into a commercial mass spectrometer. One hundred and sixty references on ion mobility-mass spectrometry (IMMS) are provided.