Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan, Guangdong, China. Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5 μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.     

背景磁场下Y系超导带材临界电流的测量

高温超导电力装置一般工作于低磁场情况下,测量超导带材在低场下的临界电流特性非常重要.文中通过自行设计的实验平台,采用四引线法对Y系超导带材低场下的临界电流特性进行了测量,得到了带材临界电流随外加磁场变化的曲线,并与Bi系带材低场下的临界电流特性进行比较.     

Ab initio quantum chemistry calculations on the electronic structure of heavier alkyne congeners: diradical character and reactivity

The electronic structure of the heavier congeners of alkynes has been studied with emphasis on characterizing their extent of diradical character. Four orbitals play a crucial role in determining the electronic structure in planar trans-bent geometries. Two are associated with an out-of-plane pi interaction, pi and pi, and two are associated with in-plane interactions and/or in-plane lone pairs, LP(n-) and LP(n+). The ordering of these orbitals can change depending upon geometry. One extreme, corresponding to the local minimum for Si-Si and Ge-Ge, is a diradicaloid multiple-bonding configuration where LP and pi are nominally occupied. Another extreme, corresponding to a local minimum for Sn-Sn, is a relatively closed-shell single-bond configuration where LP and LP are nominally occupied. This ordering leads to predicted bond shortening upon excitation from singlet to triplet state. For the heavier elements, there appears to be very little energy penalty for large geometric distortions that convert from one ordering to the other on the singlet surface. The implications of these results with respect to experimental observations are discussed.     

Application of MELC and MEEKC for the Analysis of Paracetamol and Related Impurities in Suppositories

Rapid MELC and MEEKC methods were developed for paracetamol suppository assay. MELC methods for paracetamol analysis and for separation of paracetamol and its impurities were previously reported. In this study, further development of MEEKC methods and a MELC method using anionic and cationic microemulsions gave excellent validation results for paracetamol content in suppositories. SDS Microemulsion instability resulted in poor reproducibility for impurity separations using gradient elution. A novel isocratic CTAB MELC method achieved reproducible separation of paracetamol and its impurities at 0.1% levels. MEEKC methods using SDS and CTAB microemulsions resolved all of the impurities however detection at 0.1% levels was not possible. These methods gave significant benefits in terms of reduced sample pre-treatment requirements. CTAB microemulsions had greater solubilising power than their SDS equivalent and were more stable due to their longer alkyl chain length.     

非共沸混合物微翅管内强制对流蒸发换热计算

分析了非共沸混合物在水平微翅管内强制对流蒸发换热的传热传质的特点,考察了影响非共沸混合工质强制对流蒸发换热的主要影响因素,建立了考虑相界面传质阻力和微翅管二次流效应的换热系数的计算模型,利用本文模型的计算结果与实验数据进行了比较,吻合较好。在高质量流量和高干度(x>0.3)下,理论预测值与实验值的平均偏差不大于10％。     

Free surface Stokes flows obstructed by multiple obstacles

Gravity‐driven Stokes flow down an inclined plane over and around multiple obstacles is considered. The flow problem is formulated in terms of a boundary integral equation and solved using the boundary element method. A Hermitian radial basis function (RBF) is used for the interpolation of the free surface, generation of the unit normal and curvature, and to prescribe the far‐field conditions. For flow over an obstacle, hemispheres are taken. For flow around an obstacle, circular cylinders are modelled and the contact angle condition on the obstacle/free surface intersection specified using the RBF formulation. Explicit profiles are produced for flow over and around two obstacles placed in various locations relative to one another. Interaction due to two obstacles is given by comparisons made with the profiles for flow over and around individual obstacles. In general, when the obstacles are separated by a sufficiently large distance the flow profiles are identical to a single obstacle analysis. For flow over and around two obstacles in‐line with the incident flow, effects of the governing parameters are examined, with variations in plane inclination angle, Bond number, obstacle size, and in the case of obstacles intersecting the free surface, static contact angle is considered. Finally flows over and around three obstacles are modelled. Copyright © 2009 John Wiley & Sons, Ltd.     

A RAPID APPROXIMATION FOR PREDICTING THE HYDROCARBON DISCOVERY RATE: PART 2. IMPROVING THE ACCURACY

In Part 1 of this paper, we noted the systematic errors in the estimates of means and standard deviations produced by a rapid approximation applied to a model of hydrocarbon discovery. In Part 2, we apply regression to predict the approximation errors, as functions of model parameters and approximation output. With the regression model, we can correct much of the error in the approximation, as we illustrate with data from the Nisku-Shelf play of western Canada.