Novel Supports Based on Polysaccharides for Sustained‐Release of Isosorbide Dinitrate

Novel supports based on carboxymethylcellulose (CMC), crosslinked with epichlorohydrin (EPC), and microparticles based on acetylphthalylcellulose (APC), for sustained‐release of isosorbide dinitrate (Isoket, Ik), were obtained. The drug has been included into CMC hydrogels through diffusion from ethanol‐water solution. Studies about the ethanol–water ratio influence on including the drug have shown an increased amount of included drug at higher content of water in the alcohol‐water mixture. Isoket–ACP microparticles have been obtained by drug and polymer co‐precipitation from emulsified aqueous solution.

The kinetics for “in vitro” release of Ik from polymeric materials, in simulated conditions for intestinal tract medium, where the drug is preferentially absorbed, has been analyzed. The experimental data have shown a “zero” order kinetic for drug release, which is characteristic for systems controlled by diffusion.     

Crosslinked Networks Based on Polysaccharides and Collagen for Pilocarpine Sustained Release

The paper presents the experimental studies regarding synthesis and characterization of hydrogels based on gellan (Gel)/chitosan (CS) and collagen (Col), obtained by crosslinking with glutaraldehyde (GLA). The influence of the polysaccharide content and GLA ratio on the final composition and swelling characteristics was evaluated. Hydrogels swelling analysis, in distilled water and phosphate buffer (PBS, pH 7.2) has shown higher swelling degrees at increased concentration of polysaccharide into hydrogels. In vitro release of pilocarpine has demonstrated the possibility to use gellan-collagen and chitosan-collagen hydrogels as ophthalmic drug delivery matrix.     

Bioactive Polymers. XXVI. Immobilization of Pepsin on Biozan R

Pepsin was immobilized on BIOZAN R (Hercules) with dicyclohexylcarbodiimide as activator. The reaction product obtained has a protein content of 35–110 mg/g of polymer and a proteolytic activity between 20.85–28.75 μmol tyrosine/L·min·g of polymer). The coupling reaction rate is maximum under the following conditions: pepsin/BIOZAN R ratio = 0.52 g/g, DCCI/BIOZAN R ratio = 0.2 g/g, pH = 3.4, reaction time = 4 h.     

Investigation of thermal stability, spectral, magnetic, and antimicrobial behavior for new complexes of Ni(II), Cu(II), and Zn(II) with a bismacrocyclic ligand

Novel complexes of type M₂LCl₄·nH₂O (M: Ni, n = 4; M: Cu, n = 2.5 and M: Zn, n = 1.5; L: ligand resulted from 1,3-phenylenediamine, 3,6-diazaoctane-1,8-diamine, and formaldehyde one-pot condensation) were synthesized and characterized. The ligand was also isolated and characterized. The complexes features have been assigned from microanalytical, electrospray ionization tandem mass spectrometry, IR, UV–vis, ¹H NMR, and EPR spectra as well as magnetic data at room temperature. Simultaneous thermogravimetric/dynamic scanning calorimetry/evolved gas analysis measurements were performed to evidence the nature of the gaseous products formed in each step. Processes as water elimination, fragmentation, and oxidative degradation of the organic ligand as well as chloride elimination were observed during the thermal decomposition. The final product of decomposition was metal(II) oxide except for copper complex where CuCl remained also in the oxide network. The complexes exhibited an improved antibacterial activity in comparison with the ligand concerning both planktonic as well as biofilm-embedded cells.     

Fragrance encapsulation in polymeric matrices by emulsion electrospinning

We present the successful application of emulsion electrospinning for the encapsulation of a model for highly volatile fragrances, namely (R)-(+)-limonene in a poly(vinyl alcohol) (PVA) fibrous matrix. The influence of the emulsion formulation and of its colloidal properties on the fiber morphology, as well as on the limonene encapsulation efficiency, is described. The release profile of the fragrance from the electrospun nanofibers over a fifteen days range shows that this type of nanofibrous matrices with a high fragrance loading capacity is of great potential for applications in various fields, such as cosmetics or food packaging.     

Synthesis of Some Selectively N-Protected (1S,2S)-p-Nitrophenylserinol–Based Diamino-1,3-dioxanes and Tripodands

The unconventional methodology for the non-epimerizable cycloacetalization of optically active (1S,2S)-2-amino-1-(4-nitrophenyl)propane-1,3-diol (p-nitrophenylserinol) (condensed H₂SO₄ 96% as solvent and catalyst, i.e., sulfuric transacetalization) producing (2R,4S,5S) diamino-1,3-dioxanes was enlarged by the use of N-protected forms of 2,2-dimethoxyethylamine (DMEA, aminoacetaldehyde dimethylacetal). Conversely, N-protected derivatives of p-nitrophenylserinol were successfully cyclocondensed with DMEA in the same sulfuric conditions. N-Functionalization of DMEA upon treatment with trimesic acid trichloride and cyanuric chloride yielded the corresponding triple amide and melamine, respectively. Their adapted sulfuric transacetalization in triplicate in reaction with arylserinols (aryl: phenyl, p-nitrophenyl) afforded a new series of optically active tripodands.     

Synergistic effect between TiO2 sol–gel and Degussa P25 in dye photodegradation

The TiO₂ powders were synthesized by versatile and low cost sol–gel process using HNO₃ and titanium tetra-isopropoxide (volumetric ratio of 4:1) following by the hydrolysis reaction. The powders show the two polymorphs of TiO₂: 96 % anatase and 4 % brookite, due to acidic condition (pH = 3). Thin films of titanium oxide were obtained by dip-coating, using the sol–gel of titanium oxide mixed with commercial Degussa P25 into a weight ratio 1:1 or 1:1.5, to enhance the synergistic effect of anatase/rutile ratio aiming at increasing the efficiency of the TiO₂ photocatalyst in dyes degradation. The thin film surface (charge and morphology) was controlled by polymer (poly-ethylene glycol) and surfactant (Sodium dodecyl sulphate, Triton X100) addition. The titanium oxide was characterized by particle size analyzer, contact angle measurements, X-ray diffraction, scanning electron microscopy, and atomic force microscopy. The photocatalytic properties of powders and coatings were evaluated based on the degradation efficiency of two reference dyes (methyl orange and methylene blue). The results outline that poly(ethylene glycol) and films morphologies are the most influential factors that affecting the photocatalytic activity.     

Biomonitoring of infant exposure to phenolic endocrine disruptors using urine expressed from disposable gel diapers

Infant exposure to endocrine disruptors (EDs) may cause adverse health effects because of their fast growth and development during this life stage. However, collecting urine from infants for exposure assessment using biological monitoring is not an easy task. For this purpose, we evaluated the feasibility of using urine expressed from disposable gel absorbent diapers (GADs) as a matrix for biomonitoring selected phenolic EDs. GADs urine was expressed with the assistance of CaCl₂ and was collected using a device fabricated in our laboratory. The analytes were extracted and concentrated using a liquid-liquid method and their hydroxyl groups were modified by dansyl chloride to enhance their chromatography and detection. Finally, the analytes were measured by high-performance liquid chromatography (HPLC) coupled with electrospray ionization (ESI) tandem mass spectrometry (MS/MS). The target chemicals were bisphenol A, triclosan, 17 α-ethynylestradiol, the natural hormone estrone, and 17 β-estradiol. The ratio of the CaCl₂ to the urine-wetted gel absorbent, variation of the inter-urination volume, and analyte deposition bias in the diaper were assessed. Analyte blank values in the diapers, the sample storage stabilities, and recoveries of the analytes were also evaluated. The results showed that 70–80 % of the urine could be expressed from the diaper with the assistance of CaCl₂ and 70.5–124 % of the spiked analytes can be recovered in the expressed urine. The limits of detections (LODs) were 0.02–0.27 ng/mL, well within the range for detection in human populations. Our pilot data suggest that infants are widely exposed to the selected EDs.     

Synthesis of 1-(2-Fluorophenyl)pyrazoles by 1,3-Dipolar Cycloaddition of the Corresponding Sydnones

3-Arylsydnones bearing fluorine and bromine atoms on the benzene ring were synthesized from N-nitroso-2-fluorophenylglycines and characterized by NMR spectroscopy. These were employed further in synthesis of the corresponding 1-(2-fluorophenyl)pyrazoles by 1,3-dipolar cycloaddition reaction with dimethyl acetylenedicarboxylate (DMAD) as activated dipolarophile. The sydnones as reaction intermediates were characterized by single crystal X-ray diffraction analysis showing interesting features such as halogen bonding as an important interaction in modeling the crystal structure.     

A Theoretical Model for Release Dynamics of an Antifungal Agent Covalently Bonded to the Chitosan

The aim of the study was to create a mathematical model useful for monitoring the release of bioactive aldehydes covalently bonded to the chitosan by reversible imine linkage, considered as a polymer–drug system. For this purpose, two hydrogels were prepared by the acid condensation reaction of chitosan with the antifungal 2-formyl-phenyl-boronic acid and their particularities; influencing the release of the antifungal aldehyde by shifting the imination equilibrium to the reagents was considered, i.e., the supramolecular nature of the hydrogels was highlighted by polarized light microscopy, while scanning electron microscopy showed their microporous morphology. Furthermore, the in vitro fungicidal activity was investigated on two fungal strains and the in vitro release curves of the antifungal aldehyde triggered by the pH stimulus were drawn. The theoretical model was developed starting from the hypothesis that the imine-chitosan system, both structurally and functionally, can be assimilated, from a mathematical point of view, with a multifractal object, and its dynamics were analyzed in the framework of the Scale Relativity Theory. Thus, through Riccati-type gauges, two synchronous dynamics, one in the scale space, associated with the fungicidal activity, and the other in the usual space, associated with the antifungal aldehyde release, become operational. Their synchronicity, reducible to the isomorphism of two SL(2R)-type groups, implies, by means of its joint invariant functions, bioactive aldehyde compound release dynamics in the form of “kink–antikink pairs” dynamics of a multifractal type. Finally, the theoretical model was validated through the experimental data.