Electrical conduction mechanism of polyvinylidenefluoride (PVDF) – polysulfone (PSF) blend film

The electrical conductivity of polyvinylidenefluoride (PVDF) – polysulfone (PSF) blend films have been measured by studying the I–V characteristics in the temperature range of 298–398 K. The results are shown by measuring the dependence of current on field, temperature, and blending compositions in the form of I–V characteristics and analysis has been made by interpretation of Poole–Frenkel, Schottky ln (J) vs. T plots, Richardson and Arrhenius plots. For individual polymers, the conduction mechanism observed to be a Poole–Frenkel type. On blending, the charge conduction appears to be the Schottky emission at lower temperature while Poole–Frenkel mechanism at higher temperature. The analysis of these results suggests that Pool–Frenkel mechanism is mainly responsible for the observed conduction. The conductivity was found to increase with an increase in the polysulfone concentration in the blend; it could be justified in terms of mobility of charge carriers. It is found that mobility of charge carriers increases with the increase in polysulfone concentration in the blend.     

Densitometry and indirect normal‐phase HPTLC–ESI–MS for separation and quantitation of drugs and their glucuronide metabolites from plasma

The present work describes novel methods using densitometry and indirect or off‐line high performance thin‐layer chromatography–mass spectrometry (HPTLC–MS) for the simultaneous detection and quantification of asenapine, propranolol and telmisartan and their phase II glucuronide metabolites. After chromatographic separation of the drugs and their metabolites the analytes were scraped, extracted in methanol and concentrated prior to mass spectrometric analysis. Different combinations of toluene and methanol–ethanol–n‐butanol–iso‐propanol were tested for analyte separation and the best results were obtained using toluene–methanol–ammonia (6.9:3.0:0.1, v/v/v) as the elution solvent. All of the drug–metabolite pairs were separated with a homologous retardation factor difference of ≥22. The conventional densitometric approach was also studied and the method performances were compared. Both of the approaches were validated following the International Conference on Harmonization guidelines, and applied to spiked human plasma samples. The major advantage of the TLC–MS approach is that it can provide much lower limits of detection (1.98–5.83 pg/band) and limit of quantitation (5.97–17.63 pg/band) with good precision (?3.0% coefficient of variation) compared with TLC–densitometry. The proposed indirect HPTLC–MS method is simple yet effective and has tremendous potential in the separation and quantitation of drugs and their metabolites from biological samples, especially for clinical studies.     

Form I of desloratadine,a tricyclic anti­histamine

The title compound [systematic name: 8‐chloro‐11‐(piperidin‐4‐yl­idene)‐6,11‐dihydro‐5H‐benzo[4,5]cyclo­hepta­[2,1‐b]pyridine], C₁₉H₁₉ClN₂, was crystallized from ethyl acetate. The inter­esting feature of the reported structure is that it does not contain any strong hydrogen bonds, although the mol­ecule contains a secondary NH group, which is a good hydrogen‐bond donor.     

Kinetic and structural characterization of human manganese superoxide dismutase containing 3-fluorotyrosines

Incorporation of 3-fluorotyrosine and site-specific mutagenesis have been used with stopped-flow spectrophotometry and pulse radiolysis to investigate the catalytic properties of human manganese superoxide dismutase (MnSOD). All of the nine tyrosine residues in each of the four subunits of the homotetramer of human MnSOD were replaced with 3-fluorotyrosine. Previous studies showed that the crystal structures of the unfluorinated and fluorinated human MnSOD are nearly superimposable with the root-mean-square deviation for 198 -carbon atoms at 0.3 Å. However, the catalytic activity k_cat/K_m of the fluorinated MnSOD at 30 μM⁻¹ s⁻¹ was less than unfluorinated wild type at 800 μM⁻¹ s⁻¹. Comparison of the values of k_cat/K_m for fluorinated and unfluorinated wild-type andY34F MnSOD showed that this decrease for the fluorinated enzyme was in significant part due to 3-fluorotyrosine residues distant (>7 Å) from the active-site metal, not to 3-fluorotyrosine at position 34 close (5 Å) to the metal. Although many rate constants for the catalysis are decreased by this fluorination, the rate of dissociation of the product-inhibited complex appears unchanged by the presence of fluorinated tyrosines. These results suggest that Tyr34 is not a proton donor in the release of the product-inhibited complex, which involves protonation of a peroxo complex of the metal with release of hydrogen peroxide.     

Gold-catalysed synthesis of amino acid-derived 2,5-disubstituted oxazoles

Amino acid-derived propargylic amides are cyclised in a one-pot, Au(III)-catalysed operation to yield 5-bromomethyl oxazoles. These compounds are further elaborated to bis-heterocycles, dipeptide mimics and more.     

Block copolymer containing poly(3‐hexylthiophene) and poly(4‐vinylpyridine): Synthesis and its interaction with CdSe quantum dots for hybrid organic applications

Poly(3‐hexylthiophene)‐b‐poly(4‐vinylpyridine) diblock copolymer was synthesized by RAFT polymerization of 4‐vinyl pyridine using a trithiocarbonate‐terminated poly(3‐hexylthiophene) macro‐RAFT agent. The optoelectronic properties and the morphology of the block copolymer blends with CdSe quantum dots were investigated. UV‐vis and fluorescence experiments were performed to prove the charge transfer between CdSe and poly(3‐hexylthiophene)‐b‐poly(4‐vinylpyridine) diblock copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Enhancement of OFET performance of semiconducting polymers containing benzodithiophene upon surface treatment with organic silanes

Poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene} ( P1 ) homopolymer and poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene ‐alt‐thiophene} ( P2 ) alternating copolymer have been synthesized by Stille coupling polymerization. The field‐effect mobilities of both polymers were measured on both untreated and silane‐treated OFET devices. Various silanes were selected to allow an incremental increase in the hydrophobicity of the silicon dioxide dielectric. A direct correlation was observed between the hydrophobicity of the silicon dioxide dielectric surface and the enhancement of the field‐effect mobilities. The highest mobilities for both polymers were measured on the OFET devices treated with heptadecafluoro‐1,1,2,2‐tetrahydro‐decyl‐1‐trimethoxysilane (FS) which generated the most hydrophobic surface. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Determination of penciclovir in human plasma by liquid chromatography-electrospray ionization tandem mass spectrometry: application to a clinical pharmacokinetic study

A rapid, specific and sensitive liquid chromatography tandem mass spectrometry (LC–MS/MS) method was developed for the determination of penciclovir in human plasma. The method involved simple, one‐step SPE procedure coupled with a C₁₈, 75 × 4.mm, 3µm column with a flow‐rate of 0.5 mL/min, and acyclovir was used as the internal standard. The Quattro Micro mass spectrometry was operated under the multiple reaction‐monitoring mode using the electrospray ionization technique. Using 250 µL plasma, the methods were validated over the concentration range 52.555–6626.181 ng/mL, with a lower limit of quantification of 52.55 ng/mL. The intra‐ and inter‐day precision and accuracy values were found to be within the assay variability limits as per the FDA guidelines. The developed assay method was applied to a clinical pharmacokinetic study in human volunteers. Copyright © 2010 John Wiley & Sons, Ltd.