Studies on α-, β-, and γ-cyclodextrin inclusion complexes of isoquinoline alkaloids berberine, palmatine and coralyne

The complexation of three isoquinoline alkaloids berberine, palmatine and coralyne with α-, β-, and γ-CDs were studied by absorption, fluorescence, circular dichroism, NMR spectroscopy and microcalorimetric assay techniques. Their binding constant (K _BH) values were determined by Benesi–Hildebrand equation. All the alkaloids formed 1:1 stoichiometry complexes with the cyclodextrins (CDs). The binding affinity is largest in β-CD followed by γ-, and α-CD for coralyne, followed by berberine and then palmatine. The thermodynamic parameters of the complexation were determined by calorimetry. The stoichiometry of complex formation and the variation of the apparent binding constant from spectroscopic studies were confirmed by calorimetry. The formation of the inclusion complexes was entropy driven in almost all the systems. Coralyne formed the strongest complex with all the CDs, followed by berberine and palmatine in that order. Coralyne-β-CD complex was studied through NMR, indicating more than one interaction mode.     

Microwave sintering of nickel ferrite nanoparticles processed via sol–gel method

Magnetic nickel ferrite (NiFe₂O₄) was prepared by sol–gel process and calcined in the 2.45 GHz singlemode microwave furnace to synthesize nickel nanopowder. The sol–gel method was used for the processing of the NiFe₂O₄ powder because of its potential for making fine, pure and homogeneous powders. Sol–gel is a chemical method that has the possibility of synthesizing a reproducible material. Microwave energy is used for the calcining of this powder and the sintering of the NiFe₂O₄ samples. Its use for calcination has the advantage of reducing the total processing time and the soak temperature. In addition to the above combination of sol–gel and microwave processing yields to nanoscale particles and a more uniform distribution of their sizes. X-ray diffraction, energy dispersive X-ray spectroscopy, transmission electron microscopy and vibrating sample magnetometer were carried out to investigate structural, elemental, morphological and magnetic aspects of NiFe₂O₄. The results showed that the mean size and the saturation magnetization of the NiFe₂O₄ nanoparticles are about 30 nm and 55.27 emu/g, respectively. This method could be used as an alternative to other chemical methods in order to obtain NiFe₂O₄ nanoparticles.     

Enrichment of Zinc and Iron Micronutrients in Lentil (Lens culinaris Medik.) through Biofortification

Biofortification of pulse crops with Zn and Fe is a viable approach to combat their widespread deficiencies in humans. Lentil (Lens culinaris Medik.) is a widely consumed edible crop possessing a high level of Zn and Fe micronutrients. Thus, the present study was conducted to examine the influence of foliar application of Zn and Fe on productivity, concentration, uptake and the economics of lentil cultivation (LL 931). For this, different treatment combinations of ZnSO₄·7H₂O (0.5%) and FeSO₄·7H₂O (0.5%), along with the recommended dose of fertilizer (RDF), were applied to the lentil. The results of study reported that the combined foliar application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at pre-flowering (S1) and pod formation (S2) stages was most effective in enhancing grain and straw yield, Zn and Fe concentration, and uptake. However, the outcome of this treatment was statistically on par with the results obtained under the treatment ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. A single spray of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage enhanced the grain and straw yield up to 39.6% and 51.8%, respectively. Similarly, Zn and Fe concentrations showed enhancement in grain (10.9% and 20.4%, respectively) and straw (27.5% and 27.6% respectively) of the lentil. The increase in Zn and Fe uptake by grain was 54.8% and 68.0%, respectively, whereas uptake by straw was 93.6% and 93.7%, respectively. Also the benefit:cost was the highest (1.96) with application of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage. Conclusively, the combined use of ZnSO₄·7H₂O (0.5%) + FeSO₄·7H₂O (0.5%) at S1 stage can contribute significantly towards yield, Zn and Fe concentration, as well as uptake and the economic returns of lentil to remediate the Zn and Fe deficiency.     

Integration of Auditor Preferences and Sampling Objectives: A Polynomial Goal-Programming Perspective

The choice of an audit sample involves integration of diverse goals. Such integration must consider the preferences of the auditor towards costs as well as risks. Traditionally this problem has been formulated to determine minimal sample size and its allocation such that each of the goals is satisfied simultaneously or to the extent possible. However, these formulations do not consider trade-offs between goals, so that the sample may not reflect the auditor's preferences regarding sampling costs and risks. In this paper, we model such trade-offs by utilizing a polynomial goal-programming framework and utilize a practical case problem to illustrate the framework. Computational experience shows the technique to be feasible and inexpensive.     

Negative ion electrospray ionization mass spectral study of dicarboxylic acids in the presence of halide ions

The negative ion electrospray ionization (ESI) mass spectra of a series of dicarboxylic acids, a pair of isomeric (cis/trans) dicarboxylic acids and two pairs of isomeric (positional) substituted benzoic acids, including a pair of hydroxybenzoic acids, were recorded in the presence of halide ions (F(-), Cl(-), Br(-) and I(-)). The ESI mass spectra contained [M--H](-) and [M+X](-) ions, and formation of these ions is found to be characteristic of both the analyte and the halide ion used. The analytes showed a greater tendency to form adduct ions with Cl(-) under ESI conditions compared with the other halide ions used. The isomeric compounds yielded distinct spectra by which the isomers could be easily distinguished. The collision-induced dissociation mass spectra of [M+X](-) ions reflected the gas-phase basicities of both the halide ion and [M--H](-) ion of the analyte. However, the relative ordering of gas-phase basicities of all analyte [M--H](-) and halide ions could not account for the dominance of chloride ion adducts in ESI mass spectra of the analytes mixed with equimolar quantities of the four halides.     

Electronic, epr and magnetic studies of Co(II), Ni(II) and Cu(II) complexes with thiosemicarbazone (L1) and semicarbazone (L2) derived from pyrole-2-carboxyaldehyde

Co(II), Ni(II) and Cu(II) complexes are synthesized with thiosemicarbazone (L(1)) and semicarbazone (L(2)) derived from pyrole-2-carboxyaldehyde. These complexes are characterized by elemental analysis, molar conductance, magnetic susceptibility measurements, mass, IR, electronic and EPR spectral studies .The molar conductance measurements of the complexes in DMSO correspond to non-electrolytic nature except Co(L1)2(NO3)2 and Ni(L1)2(NO3)2 complexes which are 1:2 electrolytes. All the complexes are of high-spin type. On the basis of spectral studies an octahedral geometry may be assigned for Co(II) and Ni(II) complexes except Co(L1)2(NO3)2 and Ni(L1)2(NO3)2 which are of tetrahedral geometry. A tetragonal geometry may be suggested for Cu(II) complexes.     

Mechanisms and kinetics of trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate adsorption onto chitosan

Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various solutions, but the extension of chitosan as an adsorbent to remove organic substances from water and wastewater has seldom been explored. In this study, the adsorption of an azo dye, trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate (1), from aqueous solution onto the various degrees of deacetylated chitosan has been investigated. Equilibrium studies have been carried out to determine the capacity of chitosan for dye. The experimental data were analyzed using two isotherm correlations, namely, Langmuir and Freundlich equations. The linear correlation coefficients were determined for each isotherm and the Langmuir provided the best fit. The experimental adsorption isotherms were perfectly reproduced in the simulated data obtained from numerical analysis on the basis of the Langmuir model and the isotherm constants. Adsorption of (1) onto the chitosan flakes was found to be strongly depending on degrees of deacetylation in chitosan and temperatures. Significant amounts of (1) were adsorbed by chitosan 8B (higher degree of deacetylated chitosan), but the adsorption capacity was reduced remarkably with increasing solution temperatures. Thermodynamic parameters such as change in free energy (DeltaG), enthalpy (DeltaH), and entropy (DeltaS) were also determined. In addition, kinetic study indicated that the adsorption process mechanisms were both transport- and attachment-limited.     

1,5-Benzothiazepine Derivatives: Green Synthesis,In Silico and In Vitro Evaluation as Anticancer Agents

Considering the importance of benzothiazepine pharmacophore, an attempt was carried out to synthesize novel 1,5-benzothiazepine derivatives using polyethylene glycol-400 (PEG-400)-mediated pathways. Initially, different chalcones were synthesized and then subjected to a cyclization step with benzothiazepine in the presence of bleaching clay and PEG-400. PEG-400-mediated synthesis resulted in a yield of more than 95% in less than an hour of reaction time. Synthesized compounds 2a–2j were investigated for their in vitro cytotoxic activity. Moreover, the same compounds were subjected to systematic in silico screening for the identification of target proteins such as human adenosine kinase, glycogen synthase kinase-3β, and human mitogen-activated protein kinase 1. The compounds showed promising results in cytotoxicity assays; among the tested compounds, 2c showed the most potent cytotoxic activity in the liver cancer cell line Hep G-2, with an IC₅₀ of 3.29 ± 0.15 µM, whereas the standard drug IC₅₀ was 4.68 ± 0.17 µM. In the prostate cancer cell line DU-145, the compounds displayed IC₅₀ ranges of 15.42 ± 0.16 to 41.34 ± 0.12 µM, while the standard drug had an IC₅₀ of 21.96 ± 0.15 µM. In terms of structural insights, the halogenated phenyl substitution on the second position of benzothiazepine was found to significantly improve the biological activity. This characteristic feature is supported by the binding patterns on the selected target proteins in docking simulations. In this study, 1,5-benzothiazepines have been identified as potential anticancer agents which can be further exploited for the development of more potent derivatives.     

Synthesis,Structural Investigations,and In Vitro/In Silico Bioactivities of Flavonoid Substituted Biguanide: A Novel Schiff Base and Its Diorganotin (IV) Complexes

Quercetin is one of the most powerful bioactive dietary flavonoids. The in vivo biological study of quercetin is extremely difficult due to its very low solubility. However, diorganotin complexes of quercetin are more useful when contrasted with quercetin due to increased solubility. In the present study, quercetin, substituted biguanide synthesized in the form of Schiff base and its di-alkyl/aryl tin (IV) complexes were obtained by condensing Schiff base with respective di-alkyl/aryl tin (IV) dichloride. Advanced analytical techniques were used for structural elucidation. The results of biological screening against Gram-positive/Gram-negative bacteria and fungi showed that these diorganotin (IV) derivatives act as potent antimicrobial agents. The in silico investigation with dihydropteroate (DHPS) disclosed a large ligand–receptor interaction and revealed a strong relationship between the natural exercises and computational molecular docking results.