Approaching non-destructive surface chemical analysis of CMSX-4 superalloy with double-pulsed laser induced breakdown spectroscopy

Laser induced breakdown spectroscopy (LIBS) was performed on the CMSX-4 Ni-based superalloy using a femtosecond pulsed laser. An orthogonal double-pulse technique was used to minimize surface damage associated with LIBS. With this technique, the depth of ablation craters was reduced from 200 nm for single-pulse LIBS down to less than 60 nm using orthogonal double-pulse LIBS. The technique also allowed the average velocity of the ablated material to be determined, which ranged from 4720 ± 560 m/s at a pump laser fluence of 3.1 J/cm² to 8150 ±1800 m/s at 10.1 J/cm².     

Fluoroarylphosphines as ligands

This short review concentrates on important aspects of fluoroarylphosphines, in particular their synthesis, ligand properties and chemical and catalytic properties of their complexes. Although the electronic, steric and chemical properties of fluoroarylphosphines have been known for 30 years, their use as ligands for homogeneous catalysis and in the synthesis of elaborate multidentate ligands has occurred more recently. The number of recent reports suggests that their importance is growing.     

High-Resolution Deformation Mapping Across Large Fields of View Using Scanning Electron Microscopy and Digital Image Correlation

This paper details the creation of experimental and computational frameworks to capture high-resolution, microscale deformation mechanisms and their relation to microstructure over large (mm-scale) fields of view. Scanning electron microscopy with custom automation and external beam control was used to capture 209 low-distortion micrographs of 360 μm?×?360 μm each, that were individually correlated using digital image correlation to obtain displacement/strain fields with a spatial resolution of 0.44 μm. Displacement and strain fields, as well as secondary electron images, were subsequently stitched to create a 5.7 mm × 3.4 mm field of view containing 100 million (7678?×?13,004) data points. This approach was demonstrated on Mg WE43 under uniaxial compression, where effective strain was shown to be relatively constant with respect to distance from the grain boundary, and a noticeable increase in the effective strain was found with an increase in the basal Schmid factor. The ability to obtain high-resolution deformations over statistically relevant fields of view enables large data analytics to examine interactions between microstructure, microscale strain localizations, and macroscopic properties.     

Measurement of Strain Localization Resulting from Monotonic and Cyclic Loading at 650 <Superscript>∘</Superscript>C in Nickel Base Superalloys

A methodology is presented for the use of the oxide scale that develops in polycrystalline Ni-base superalloys at service temperature, as a speckle pattern for μm-scale resolution strain measurements. Quantitative assessment of the heterogeneous strain field at the grain scale is performed by high-resolution SEM digital image correlation under monotonic and cyclic loading in polycrystalline Ni-base superalloys up to 650 ^°C. In the René 88DT superalloy, strain localization is observed near twin boundaries during low cycle fatigue (LCF) at intermediate temperatures, correlating with activation of {111} 〈110〉 and {111} 〈112〉 slip systems. A strong correlation between the microstructural configuration that promotes strain localization during monotonic loading and crack initiation at 650 ^°C in low cycle fatigue was observed.     

New Adventures in Thermal Analysis

This paper describes recent advances in thermal analysis instrumentation which combine the high resolution imaging capabilities of the atomic force microscope with physical characterisation by thermal analysis. Images of the surface may be obtained according to the specimen's thermal conductivity and thermal expansivity differences in addition to the usual topographic relief. Localised equivalents of modulated temperature differential scanning calorimetry, thermomechanical and dynamic mechanical analysis have been developed with a spatial resolution of a few micrometres. A form of localised thermogravimetry-evolved gas analysis has also been demonstrated. The same instrument configuration can be adapted to allow IR microspectrometry at a resolution better than the optical diffraction limit. This revised version was published online in August 2006 with corrections to the Cover Date.     

On the Entropy of Schwarzschild Space-Time

In a previous paper by Pollock and Singh, it was proven that the total entropy of de Sitter space-time is equal to zero in the spatially flat case K=0. This result derives from the fundamental property of classical thermodynamics that temperature and volume are not necessarily independent variables in curved space-time, and can be shown to hold for all three spatial curvatures K=0,±1. Here, we extend this approach to Schwarzschild space-time, by constructing a non-vacuum interior space with line element ds ²=e^2λ(r) dt ²?e^?2λ(r) dr ²?r ²(dθ ²+sin² θd? ²), where $\mathrm{e}^{2{\lambda }(r)}=-\frac{1}{2}(1-\frac{r^{2}}{R_{0}^{2}})$ , which matches onto the vacuum exterior Schwarzschild metric in such a way that e^2λ and d(e^2λ )/dr are both continuous at the Schwarzschild radius R ₀=2M. Then we show that the volume entropy is equal to A/4, where $A\equiv 4\pi R_{0}^{2}$ is the area of the apparent horizon, as found by Hawking.     

Modulated Differential Scanning Calorimetry Analysis of Interphases in Multi-Component Polymer Materials

A modulated-temperature differential scanning calorimetry (M-TDSC) method for the analysis of interphases in multi-component polymer materials has been developed further. As examples, interphases in a polybutadiene-natural rubber (50:50 by mass) blend, a poly(methyl methacrylate)-poly(vinyl acetate) (50:50 by mass) structured latex film, a polyepichlorohydrinpoly(vinyl acetate) bilayer film, and polystyrene-polyurethane (40:60 by mass) and poly(ethyl methacrylate)-polyurethane (60:40 by mass) interpenetrating polymer networks were investigated. The mass fraction of interphase and its composition can be calculated quantitatively. These interphases do not exhibit clear separate glass transition temperatures, but occur continually between the glass transition temperatures of the constituent polymers. This revised version was published online in August 2006 with corrections to the Cover Date.     

Two-body hypercharge-exchange reactions in K−p and π+p interactions at 10 and 16 GeV/c

Cross-section values or upper limits are presented for twenty-five two-body hypercharge-exchange reactions in K^?p and π⁺p interactions at 10 and 16 GeV/c. The 16 GeV/c results are compared with some predictions of line-reversal plus exchange-degenerate Regge poles, of SU(3) and of the additive quark model. Agreement is found in all cases.     

Past intensity of a terminated poisson process

A previously published analysis of the past behavior of a terminated stochastic process (Maltz and Pollock, 1980) is flawed. We present a correct analysis, specifically for the past intensity of a Poisson process stopped when the number of events within the past w time units exceeds 2.     

The spectrophotometric determination of tellurium with bismuthiol II after separation with 4,4'-methylenediantipyrene and 1,1,2,2-tetrachloroethane

Tellurium can be isolated from most other elements by the extraction of its complex with 4,4'-methylenediantipyrene into 1,1,2,2-tetrachloroethane. After isolation tellurium can be determined photometrically as its complex with bismuthiol II in chloroform. The procedure can be applied to copper and copper-based materials in the presence of many elements normally associated with copper, including selenium. The procedure is lengthy but straightforward, precise and subject to few interferences.