Optical properties of human prostate at 732 nm measured in mediated photodynamic therapy

Characterization of the tissue light penetration in prostate photodynamic therapy (PDT) is important to plan the arrangement and weighting of light sources so that sufficient light fluence is delivered to the treatment volume. The optical properties (absorption [mu(a)], transport scattering [mu(s)'] and effective attenuation [mu(eff)] coefficients) of 13 patients with locally recurrent prostate cancer were measured in situ using interstitial isotropic detectors. Measurements were made at 732 nm before and after motexafin lutetium (MLu)-mediated PDT in four quadrants. Optical properties were derived by applying the diffusion theory to the fluence rates measured at several distances (0.5-5 cm) from a point source. mu(a) and mu(s)' varied between 0.07 and 1.62 cm(-1) (mean 0.37 +/- 0.24 cm(-1)) and 1.1 and 44 cm(-1) (mean 14 +/- 11 cm(-1)), respectively. mu(a) was proportional to the concentration of MLu measured by an ex vivo fluorescence assay. We have observed, on average, a reduction of the MLu concentration after PDT, presumably due to the PDT consumption of MLu. mu(eff) varied between 0.91 and 6.7 cm(-1) (mean 2.9 +/- 0.7 cm(-1)), corresponding to an optical penetration depth (delta = 1/micro(eff)) of 0.1-1.1 cm (mean 0.4 +/- 0.1 cm). The mean penetration depth at 732 nm in human prostate is at least two times smaller than that found in normal canine prostates, which can be explained by a four times increase of the mean value of mu(s)' in human prostates. The mean light fluence rate per unit source strength at 0.5 cm from a point source was 1.5 +/- 1.1 cm(-2), excluding situations when bleeding occurs. The total number of measurements was N = 121 for all mean quantities listed above. This study showed significant inter- and intraprostatic differences in the optical properties, suggesting that a real-time dosimetry measurement and feedback system for monitoring light fluences during treatment should be considered for future PDT studies.     

Beitrag zur Trennung des Urans von Thorium mittels Ionenaustausches und zur fluorimetrischen Uranbestimmung

Zusammenfassung Es wird eine Uran-Thoriumtrennung mittels des stark basischen Anionenaustauschers Amberlite IRA 400 beschrieben. Uran(VI) läßt sich von Thorium und einer Reihe anderer Kationen dadurch trennen, daß es mit 6,5n Salzsäure einen negativ geladenen Komplex bildet, der am Austauscherharz sorbiert wird, während Thorium keinen Komplex bildet und daher nicht sorbiert wird. Uran wird mit 1 n Salzsäure eluiert.Zur Bestimmung des Urans wird eine genaue und empfindliche fluorimetrische Bestimmung angewendet, die durch Einfachheit und Billigkeit der dazu verwendeten Apparate gekennzeichnet ist.Das Verhalten anderer Kationen unter den Bedingungen der Trennung wurde qualitativ studiert und die Möglichkeit der Trennung des Urans und Thoriums von den erwähnten Kationen diskutiert.Herrn Prof. Dr. L. Schmid, Wien, zum 60. Geburtstag gewidmet.Für die Gewährung eines Stipendiums zur Ausführung der vorliegenden Arbeit an eine von uns (M. P.), sei der Österreichischen Gesellschaft für Mikrochemie der beste Dank ausgesprochen.Herrn Prof. Dr. F. Hecht, der diese Arbeit ermöglichte, sei für seine stete Hilfe herzlich gedankt.     

Development of a formulation of Pirodavir using 2-hydroxypropyl-β-cyclodextrin

Pirodavir, 4-[2-[1-(6-Methyl-3-pyridazinyl)-4-piperidinyl]ethoxy]benzoic acid ethyl ester, is an antiviral compound which has low aqueous solubility (<0.01 mg/ml). The compound is a weak base (pKa 5.8) with high lipophicity (logP 4.44). Ionization of the compound increases the solubility in acidic medium to 2.3 mg/ml at pH 2.4. However, a low pH is not acceptable for nasal application as this would induce irritation. Extensive solubility studies were performed using different types of substituted cyclodextrins in order to select an appropriate derivate capable of increasing solubility to an acceptable level for formulations for nasal application. Aqueous solubility of pirodavir increased in a linear fashion with increasing concentration of most of the substituted cyclodextrins. However, using 2-hydropropyl-β-cyclodextrin (HPBCD) the solubility increased in a non-linear fashion. Based on these studies HPBCD was selected as the most appropriate excipient. To support a clinical study on the treatment of rhinovirus cold by intranasal Pirodavir formulations were developed containing up to 5 mg/ml of pirodavir and up to 10% of HPBCD. Stability of the formulations was studied and found to be acceptable.     

A potent and highly selective sulfotransferase inhibitor

In the present work, we have used a newly developed, fluorescence-based assay to screen a library of >30 000 compounds as potential beta-arylsulfotransferase-IV inhibitors. A total of 11 inhibitors were discovered. Most of the compounds discovered showed low micromolar inhibition, but one of the compounds showed potent inhibition (Ki = 96 nM). The most potent of these inhibitors was tested against a variety of other purine binding enzymes and showed remarkable specificity.     

Photoinduced dynamics of a cyanine dye: parallel pathways of non-radiative deactivation involving multiple excited-state twisted transients

Cyanine dyes are broadly used for fluorescence imaging and other photonic applications. 3,3′-Diethylthiacyanine (THIA) is a cyanine dye composed of two identical aromatic heterocyclic moieties linked with a single methine, –CH. The torsional degrees of freedom around the methine bonds provide routes for non-radiative decay, responsible for the inherently low fluorescence quantum yields. Using transient absorption spectroscopy, we determined that upon photoexcitation, the excited state relaxes along two parallel pathways producing three excited-state transients that undergo internal conversion to the ground state. The media viscosity impedes the molecular modes of ring rotation and preferentially affects one of the pathways of non-radiative decay, exerting a dominant effect on the emission properties of THIA. Concurrently, the polarity affects the energy of the transients involved in the decay pathways and further modulates the kinetics of non-radiative deactivation.     

Iron-modified zeolite BETA: efficient catalyst in methyllaurate, 2-hexyl-1,3-dioxolane, 4-methyl-2-propyltetrahydro-2H-pyran-4-ol and 4-methyl-2-phenyl-tetrahydro-2H-pyran-4-ol synthesis

Research on Chemical Intermediates - Several types of modified zeolite BETA38 with different iron loading were prepared. Prepared materials were characterized using different techniques (XRD, XRF,...     

Controlling the magnetic ground state in Cr1-x Vx films

We demonstrate the ability to control the magnetic phase diagram of Cr1-x Vx(110) thin films grown on a W(110) substrate. Using angle-resolved photoemission, we have mapped paramagnetic and commensurate and incommensurate antiferromagnetic phases as a function of temperature, film thickness, and composition. We show that surface-localized electron states play a key role in the observed phase behaviors and suggest from this that it might be possible to control the magnetic phase by applying an external electric field.     

Preparation of α-terpineol and perillyl alcohol using zeolites beta

The preparation of α-terpineol by direct hydration of limonene catalyzed by zeolites beta was studied. The same catalyst was used to prepare perillyl alcohol by isomerization of β-pinene oxide in the presence of water. The aim was to optimize the reaction conditions to achieve high conversions of starting material and high selectivity to the desired products. In the case of limonene, it was found that the highest selectivity to α-terpineol was 88% with conversion of 36% under the conditions: 50 wt% of catalyst beta 25, 10% aqueous acetic acid (10 mL) (volume ratio limonene:H₂O?=?1:4.5), temperature 50 °C, after 24 h. In the case of β-pinene oxide, it was found that the highest selectivity to perillyl alcohol, which was 36% at total conversion, was obtained in the reaction under the following conditions: dimethyl sulfoxide as solvent (volume ratio β-pinene oxide:DMSO?=?1:5), catalyst beta 25 without calcination (15 wt%), demineralized water (molar ratio β-pinene oxide:H₂O?=?1:8), temperature 70 °C, 3 h. The present study shows that the studied reactions are suitable for the selective preparation of chosen compounds.

     

The Assembly‐Disassembly‐Organization‐Reassembly Mechanism for 3D‐2D‐3D Transformation of Germanosilicate IWW Zeolite

Hydrolysis of germanosilicate zeolites with the IWW structure shows two different outcomes depending on the composition of the starting materials. Ge‐rich IWW (Si/Ge=3.1) is disassembled into a layered material (IPC‐5P), which can be reassembled into an almost pure silica IWW on treatment with diethoxydimethylsilane. Ge‐poor IWW (Si/Ge=6.4) is not completely disassembled on hydrolysis, but retains some 3D connectivity. This structure can be reassembled into IWW by incorporation of Al to fill the defects left when the Ge is removed.