Coordination Polymers. 9. Chelate Polymers Derived from Bisphenolic Complexes and Propylenediamine

Chelate polymers derived from bis(2,4-dihydroxybenzaldehyde)propyl-enediimine M and bis(2,4-dihydroxyacetophenone)propylenediimine M (M = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺) with aromatic acid chlorides were prepared by interfacial polycondensation. Also, chelate polysiloxanes were obtained from the same monomers and α,ω-dichloropolydimethyl-siloxane. The spectral, thermal, magnetic, and electrical properties of the polychelates were studied.     

Vanadium Doped Sol-Gel TiO2 Coatings

A study of the experimental conditions required to obtain vanadium doped sol-gel TiO2 coatings is presented. Tetraethyl orthotitanate was employed as the TiO2 source and VCl3, VOSO4 · H2O and VOSO4 dissolved H2SO4 where employed as vanadium sources.Dip coating has been used to produce coatings on silicon wafers, spectral carbon electrodes and titanium electrodes. Both supported and unsupported films have been studied by UV-Vis spectra, IR spectroscopy and X-ray diffraction (XRD). The measurements have been made on samples as prepared and treated thermally at temperatures between 100°C and 300°C. The thermal treatment temperatures have been established from DTA/TGA measurements.The vanadium doped sol-gel TiO2 coatings have been tested as sensors for redox potential measurements in electrochemical processes. The influence of both the thickness of films and the nature of substrate has been investigated.     

Dispersed fluorescence spectroscopy of jet-cooled HCF and DCF: Vibrational structure of the X 1A' state

We recorded dispersed fluorescence (DF) spectra following excitation of the pure bending levels 2(0) (n) and the combination states 1(0) (1)2(0) (n) and 2(0) (n)3(0) (1) in the A 1A"<--X 1A' system of HCF and DCF. Spectra were measured with a 0.3 m spectrograph equipped with a gated intensified charge coupled device (CCD) detector and obtained under jet-cooled conditions using a pulsed discharge source. The DF spectra reveal rich detail concerning the vibrational structure of the X state up to 10 000 cm(-1). For HCF, resonances among the nearly degenerate levels 1(1)2n, 2n+13(1), and 2n+2 produce a polyadlike structure in the spectrum, and the usual effective spectroscopic Hamiltonian (Dunham expansion) poorly reproduces the experimental term energies. In contrast, this Hamiltonian works well for the term energies of DCF. Density functional calculations of the ground state vibrational frequencies were performed; the results are in excellent agreement with the experimentally derived vibrational parameters. The search for perturbations involving the low-lying a 3A" state is described.     

Protein–Inorganic Array Construction: Design and Synthesis of the Building Blocks

Herein we describe the design and synthesis of the first series of di‐functional ligands for the directed construction of inorganic‐protein frameworks. The synthesized ligands are composed of a metal‐ion binding moiety (terpyridine‐based) conjugated to an epoxysuccinyl peptide, known to covalently bind active cysteine proteases through the active‐site cysteine. We explore and optimize two different conjugation chemistries between the di‐functionalized metal‐ion ligand and the epoxysuccinyl‐containing peptide moiety: peptide‐bond formation (with limited success) and Cu^I‐catalysed click chemistry (with good results). Further, the complexation of the synthesized ligands with Fe^II and Ni^II ions is investigated: the di‐functional ligands are confirmed to behave similarly to the parent terpyridine. As designed, the peptidic moiety does not interfere with the complexation reaction, in spite of the presence of two triazole rings that result from the click reaction. ES‐MS together with NMR and UV/Vis studies establish the structure, the stoichiometry of the complexation reactions, as well as the conditions under which chemically sensitive peptide‐containing polypyridine ligands can undergo the self‐assembly process. These results establish the versatility of our approach and open the way to the synthesis of di‐functional ligands containing more elaborated polypyridine ligands as well as affinity labels for different enzyme families. As such, this paper is the first step towards the construction of robust supramolecular species that cover a size‐regime and organization level previously unexplored.     

Numerical modelling and simulation of Laviron treatment for poly-phenothiazine derivative-modified glassy carbon electrodes

Electropolymerization of a new phenothiazine derivative (bis-phenothiazin-3-yl methane, BPhM) on glassy carbon electrodes leads to electroactive and conducting layers of poly-BPhM. Based on the Laviron method, the kinetic parameters (the heterogeneous electron transfer rate constants k _s and transfer coefficients α) were calculated out of the experimental and theoretical data. The theoretical data have been obtained by using the analogical modelling and numerical simulating method. The modified electrodes present high values of k _s(~50s⁻¹) in phosphate buffer solutions of different pH values. A good correlation of mathematical and numerical simulated kinetic parameters has been obtained, with the experimental values and the norm of residuals being very close to zero.     

DNA-based phosphane ligands

In order to expand the repertoire of DNA sequences specifically interacting with transition metals, we report here the first examples of DNA sequences carrying mono- and bidentate phosphane ligands as well as P,N-ligands. Aminoalkyl-modified oligonucleotides have been reacted at predetermined internal sites with carboxylate derivatives of pyrphos, BINAP and phosphinooxazoline (PHOX) 2 b-d. Carbodiimide coupling in the presence of N-hydroxysuccinimide provided the DNA-ligand conjugates in 38-78 % yield. Phosphane-containing oligonucleotides and their phosphane sulfide analogues were characterized by mass spectrometry (MALDI-TOF and FT-ICR-ESI) and their stability after purification and isolation was systematically investigated. While DNA-appended pyrphos ligand was quickly oxidized, BINAP and PHOX conjugates showed high stabilities, making them useful precursors for incorporation of transition metals into DNA.     

Spectroscopic investigation of β-cyclodextrin -metoprolol tartrate inclusion complexes

Aqueous-solution complexes of β-cyclodextrin (β-CD) with metoprolol tartrate (MET) have been analysed with ¹H NMR and UV–vis spectroscopy. With ¹H NMR a [1:1] stoichiometry could be established for the β-CD-MET complex while its stability constant was determined with UV–vis spectroscopy. Powder diffraction data of a polycrystalline sample of the β-CD-MET complex show that a novel product has been formed, likely to be a β-CD-MET [1:1] inclusion complex. Also Hyperchem MM+ molecular-dynamics results suggest an inclusion complex and from ¹H NMR data it is inferred that probably the MET is docked in the CD with the formers methoxyethyl-benzene moiety in front. Mihaela Toma is Socrates/Erasmus student at UNED Madrid     

Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

On the efficiency of exchange in parallel tempering monte carlo simulations

We introduce the concept of effective fraction, defined as the expected probability that a configuration from the lowest index replica successfully reaches the highest index replica during a replica exchange Monte Carlo simulation. We then argue that the effective fraction represents an adequate measure of the quality of the sampling technique, as far as swapping is concerned. Under the hypothesis that the correlation between successive exchanges is negligible, we propose a technique for the computation of the effective fraction, a technique that relies solely on the values of the acceptance probabilities obtained at the end of the simulation. The effective fraction is then utilized for the study of the efficiency of a popular swapping scheme in the context of parallel tempering in the canonical ensemble. For large dimensional oscillators, we show that the swapping probability that minimizes the computational effort is 38.74%. By studying the parallel tempering swapping efficiency for a 13-atom Lennard-Jones cluster, we argue that the value of 38.74% remains roughly the optimal probability for most systems with continuous distributions that are likely to be encountered in practice.