Activation volume measurement for C[bond]H activation. Evidence for associative benzene substitution at a platinum(II) center

The reaction of the platinum(II) methyl cation [(N-N)Pt(CH(3))(solv)](+) (N-N = ArN[double bond]C(Me)C(Me)[double bond]NAr, Ar = 2,6-(CH(3))(2)C(6)H(3), solv = H(2)O (1a) or TFE = CF(3)CH(2)OH (1b)) with benzene in TFE/H(2)O solutions cleanly affords the platinum(II) phenyl cation [(N-N)Pt(C(6)H(5))(solv)](+) (2). High-pressure kinetic studies were performed to resolve the mechanism for the entrance of benzene into the coordination sphere. The pressure dependence of the overall second-order rate constant for the reaction resulted in Delta V(++) = -(14.3 +/- 0.6) cm(3) mol(-1). Since the overall second order rate constant k = K(eq)k(2), Delta V(++) = Delta V degrees (K(eq)) + Delta V(++)(k(2)). The thermodynamic parameters for the equilibrium constant between 1a and 1b, K(eq) = [1b][H(2)O]/[1a][TFE] = 8.4 x 10(-4) at 25 degrees C, were found to be Delta H degrees = 13.6 +/- 0.5 kJ mol(-1), Delta S degrees = -10.4 +/- 1.4 J K(-1) mol(-1), and Delta V degrees = -4.8 +/- 0.7 cm(3) mol(-1). Thus DeltaV(++)(k(2)) for the activation of benzene by the TFE solvento complex equals -9.5 +/- 1.3 cm(3) mol(-1). This significantly negative activation volume, along with the negative activation entropy for the coordination of benzene, clearly supports the operation of an associative mechanism.     

Excited state properties of mixed phosphine 2-(2'-pyridyl)quinoline complexes of ruthenium(II)

Mixed ligand complexes of the type Ru(pq)(2)(PP)(2+) (pq = 2,2'-pyridylquinoline and PP = one bidentate or two monodentate phosphine ligands) have been prepared from the appropriate phosphine and Ru(pq)(2)Cl(2). The room temperature absorption spectra and low temperature (77 K) emission spectra, emission lifetimes, and quantum yields have been measured for the series of complexes and compared with those of Ru(pq)(3)(2+) and analogous Ru(bpy)(2)(PP)(2+) complexes (bpy = 2,2'-bipyridine) where possible. Emission spectra have been fit using a single mode Franck-Condon analysis. The visible absorption bands and emission bands are assigned to MLCT transitions that are blue shifted relative to Ru(pq)(3)(2+), while the emission lifetimes and quantum yields are increased. The trends in the nonradiative rate constants, k(nr), are described in terms of the energy gap, E(0), and the Huang-Rhys factor, S(M), which were obtained from the spectral fittings, and are correlated with the phosphine ligand structures.     

Temperature influence on the dynamic binding capacity of a monolithic ion-exchange column

This work investigates the influence of temperature on the binding capacity of bovine serum albumin (BSA), soybean trypsin inhibitor and L-glutamic acid to a CIM (DEAE) weak anion-exchange disk monolithic column. The binding capacity was determined experimentally under dynamic conditions using frontal analysis. The effect on the dynamic binding capacity of dimers present in the BSA solution has been evaluated and a closed-loop frontal analysis was used to determine the equilibrium binding capacities. The binding capacity for both BSA and soybean trypsin inhibitor increased with increasing temperature. In the case of L-glutamic acid, an increase in the binding capacity was observed with temperature up to 20 degrees C. A further increase in temperature caused a decrease of the dynamic binding capacity.     

Phosphorus heterocycle synthesis by RPX2,· AlX3 addition to [1,n]dienes VII.

The RPX₂·AlX₃ complex ($\text{1}$) reacts with unsaturated ketones and imines to give novel 7-oxa and 7-aza-2-phosphabicyclo[2.2.1]heptanes (compounds $\text{3}$ and $\text{6}$ respectively).A new 1,3-dipolar addition of (CH₃)₂ CCH₂P?XR to nArN=C=S was disclosed resulting in the formation of the 2-imino-1,3-thiaphospholanes ($\text{7}$).     

Immobilization of the enzyme beta-lactamase on biotin-derivatized poly(L-lysine)-g-poly(ethylene glycol)-coated sensor chips: a study on oriented attachment and surface activity by enzyme kinetics and in situ optical sensing

Understanding the conformation, orientation, and specific activity of proteins bound to surfaces is crucial for the development and optimization of highly specific and sensitive biosensors. In this study, the very efficient enzyme beta-lactamase is used as a model protein. The wild-type form was genetically engineered by site-directed mutagenesis to introduce single cysteine residues on the surface of the enzyme. The cysteine thiol group is subsequently biotinylated with a dithiothreitol (DTT)-cleavable biotinylation reagent. beta-Lactamase is then immobilized site-specifically via the biotin group on neutral avidin-covered surfaces with the aim to control the orientation of the enzyme molecule at the surface and study its effect on enzymatic activity using Nitrocefin as the substrate. The DTT-cleavable spacer allows the release of the specifically bound enzyme from the surface. Immobilization of the enzyme is performed on a monolayer of the polycationic, biotinylated polymer PLL-g-PEG/PEG-biotin assembled on niobium oxide (Nb2O5) surfaces via neutral avidin as the docking site. Two different assembly protocols, the sequential adsorption of avidin and biotinylated beta-lactamase and the immobilization of preformed complexes of beta-lactamase and avidin, are compared in terms of immobilization efficiency. In situ optical waveguide lightmode spectroscopy and colorimetric analysis of enzymatic activity were used to distinguish between specific and unspecific enzyme adsorption, to sense quantitatively the amount of immobilized enzyme, and to determine Michaelis-Menten kinetics. All tested enzyme variants turned out to be active upon immobilization at the polymeric surface. However, the efficiency of immobilized enzymes relative to the soluble enzymes was reduced about sevenfold, mainly because of impaired substrate (Nitrocefin) diffusion or restricted accessibility of the active site. No significant effect of different enzyme orientations could be detected, probably because the enzymes were attached to the surface through long, flexible PEG chain linkers.     

A HF Loaded Lewis-Acidic Aluminium Chlorofluoride for Hydrofluorination Reactions

The very strong Lewis acid aluminium chlorofluoride (ACF) was loaded with anhydrous HF. The interaction between the surface of the catalyst and HF was investigated using a variety of characterization methods, which revealed the formation of polyfluorides. Moreover, the reactivity of the HF-loaded ACF towards the hydrofluorination of alkynes was studied.     

Efficient synthesis and antioxidant activity of coelenterazine analogues

A convenient and highly convergent method for the synthesis of new imidazo[1,2-a]pyridine-based coelenterazine analogues is reported. The imidazo[1,2-a]pyridine core was constructed through a condensation between 2-aminopyridine analogues and arylglyoxals. Additionally, a new approach to the synthesis of benzylglyoxals was introduced. The imidazo[1,2-a]pyridines display moderate antioxidant activities at a low micromolar level in 2,2-diphenyl-1-picrylhydrazyl (DPPH).     

The Effect of Olive Fruit Fly Bactrocera oleae (Rossi) Infestation on Certain Chemical Parameters of Produced Olive Oils

Olives affected by active and damaging infestation (olive fruit fly Bactrocera oleae (Rossi)) were assayed for their chemical composition. Biophenols were determined by HPLC, sterols, triterpenic dialcohols, and fatty acids by gas chromatography analysis. The acquired data were statistically analyzed. Oils produced from “Istrska belica” fruit affected by active infestation compared to the oils made from fruit affected by damaging infestation showed higher amounts of total oleuropein biofenols (377.3 versus (vs.) 106.6 mg/kg), total biophenols (755 vs. 377 mg/kg), lignans (85.3 vs. 32.9 mg/kg), the dialdehydic form of decarboxymethyl oleuropein aglycone (DMO-Agl-dA) (148.3 vs. 49.0 mg/kg), its oxidized form (DMO-Agl-dA)ox (35.2 vs. 8.5 mg/kg), the dialdehydic form of oleuropein aglycone (O-Agl-dA) (61.1 vs. 8.0 mg/kg), the dialdehydic form of ligstroside aglycone (L-Agl-dA) (63.5 vs. 28.0 mg/kg), the aldehydic form of oleuropein aglycone (O-Agl-A) (40.6 vs. 8.4 mg/kg), and lower amounts of tyrosol (Tyr) (6.0 vs. 13. 9 mg/kg) and the aldehydic form of ligstroside aglycone (L-Agl-A) (13.8 vs. 40.3 mg/kg). Higher values of stigmasterol (2.99%) and lower values of campesterol (2.25%) were determined in oils affected by damaging infestation; an increase in triterpenic dialcohols was also observed (3.04% for damaging and 1.62% for active infestation). Oils affected by damaging infestation, compared to active infestation, showed lower amounts of oleic acid (73.89 vs. 75.15%) and higher amounts of myristic (0.013 vs. 0.011%), linoleic (7.27 vs. 6.48%), and linolenic (0.74 vs. 0.61%) acids.