纳米晶MgSO4·5Mg(OH)2·3H2O合成与表征

纳米材料由于具有表面、体积和量子尺寸效应的特殊性而受到广泛重视[1～3]. 微米级硫氧镁晶须作为塑料添加增强和阻燃剂已有报道[4～7]. 纳米晶MgSO4*5Mg(OH)2*3H2O不仅对塑料起补强作用, 而且其粒度小, 使塑料变得更致密, 强度、韧性与防水性能大大提高. 目前纳米材料的合成方法多种多样[8～10], 本文采用水热法制得纳米硫氧镁晶粒, 产物纯度高、分散性好且粒度易控制.     

β-D-核糖(RI)与一价、二价金属离子相互作用的理论研究

在HF和MP2水平用全电子(AE)和相对论有效芯势(RECP)方法研究了Ⅰa、Ⅰb、Ⅱa和Ⅱb族金属离子与β-D-核糖(RI)的相互作用.结果表明,RECP能可靠地用于重金属离子;二价金属离子(M2+)比一价金属离子(M+)更易使β-D-核糖(RI)变形;二价金属离子络合物(RI-M2+)比一价金属离子络合物(RI-M+)稳定.电荷布居分析的结果支持上述结论.     

Modification of polysulfone membranes 4. Ammonia plasma treatment

The effect of NH₃ and NH₃/Ar plasma on ultrafiltration polysulfone membranes have been studied. Results of contact angle, FTIR-ATR and X-ray photoelectron spectroscopy experiments clearly showed that both plasmas introduced hydrophilic, nitrogen- and oxygen-containing moieties on the polymer surface and that NH₃/Ar plasma was more efficient. That plasma was also more aggressive--signs of strong etching could be seen on the SEM pictures. Redeposition of etched material seemed to take place inside the pores. On the contrary, ammonia plasma was soft and caused cleaning the surface and pores enlargement. Performance of ammonia plasma modified membranes was greatly improved and independent on solution pH. The last observation proved amphoteric character of the surface. NH₃/Ar plasma treatment gave membranes of acidic surface and filtration indices not so good as for ammonia plasma.     

Preparation of 1,1,1,3,3-pentafluoropropane (HFC-245fa) by using a SbF5-attached catalyst

In this report, a simple process for preparing HFC-245fa through the reaction of 1,1,1,3,3-pentachloropropane (PCP) and anhydrous HF via two-step vapor-phase catalytic fluorination is described. The antimony pentafluoride catalyst was supported on inert porous materials to improve the catalytic activity. The resulting process catalyst not only exhibited high catalytic activity and excellent thermo-stability, but also improved the performance of SbF₅, in terms of hygroscopicity and corrosion.     

铝与溴代二甲氨基苯基荧光酮的多元配合物的光度研究

本文研究了在表面活性剂存在性，铝与溴代二甲氨基苯基荧光酮的显色反应。在弱酸性介质中，Ａｌ＾３＋ＢＤＭＡＦ－ＣＴＭＡＢ三元配合物在水浴加热至７０℃－８０℃时形成，其最大吸收波长为５７７ｎｍ，Ａｌ＾３＋：ＢＤＭＡＦ＝１：２，表观摩尔吸光系数为１．３４×１０＾５Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，表观稳定常数为７．４×１０＾５。在ＰＨ９．５－１０．５的氨性缓冲介质中，Ａｌ＾３＋－Ｆ＾－－ＢＤＭＡＦ－非离子表面     

含铈多元氧化物的活性结构及在丙烯氨氧化中的作用

本文利用流化床反应器研究了多元复合氧化物PMo_(12)Bi_3Fe_(8-x)Ce_xK_(0.1)O_y(x=0-8)中稀土元素铈对丙烯氨氧化的催化作用,并用x-射线衍射、红外光谱、扫描电镜和热重技术表征了催化剂的结构,发现x=2-3时,丙烯腈的收率最高。催化剂中存在Fe_2(MoO_4)_3,Ce_2(MoO_4)_3、α-Bi_2O_3、3MoO_3。这三种物相的互相溶解和凝结形成固溶体和准均相,使活源。份在各物相表面或界面上均匀分布,由此产生的各活性组份的协调作用是催化活性的主要来性组铈能抑制MoO_3升华,稳定活性相结构。     

Monitoring of the conversion from triptolide to tripchlorolide in Triptergium wilfordii by micellar electrokinetic caillary chromatography

A novel concocting method to convert Triptolide (T) into Tripchlorolide (T(4)) in the traditional Chinese herb Tripterygium wilfordii Hook F. and a micellar electrokinetic capillary chromatographic (MEKC) approach by which the conversion of Triptolide (T) and Tripchlorolide (T(4)) was identified and determined had been established. Investigations of the influence of different pH values of boric acid and borax buffer and of sodium dodecyl sulfate (SDS) and organic additive concentrations had been carried out, and the optimum separation for T and T(4) was achieved using boric acid and borax of pH 7.0 with 30 mM SDS and 20% (volume ratio) methanol as the running buffer. It was found that MEKC exhibited good accuracy, precision and repeatability and the content of T(4) was greatly increased in the herb that was treated by the new concocting method.     

生物特异性功能高分子

模仿天然生物活性高分子关键作用点的化学组成，在高分子链上接上各种官能团或化学残基，制备具有与该天然高分子相似生物活性的高分子，即生物特异性功能高分子。本文主要介绍拟肝素高分子和似粘连 蛋白高分子两种生物特异性功能高分子。     

固体炭对一氧化氮低温催化解离还原反应的影响——Ⅱ.复合催化剂中铁在载体炭上化学形态的研究

用~(57)Fe穆斯堡尔谱研究了炭载型复合催化剂中铁化学形态随温度的变化,及各活性组分、助剂对铁化学形态的影响;并通过ESR谱考察了复合催化剂中不同活性组分对铁在载体炭表面电子特性的影响。研究结果表明,复合催化剂中各活性组分、助剂和载体炭与铁之间存在着强相互作用。在350～650℃,载体炭可将铁从Fe_2O_3还原到Fe_3O_4、FeO、α-Fe和生成炭化铁。活性组分Cu和助剂K可改变催化剂中铁周围的电子密度,促进铁在载体炭上从高价态向低价态还原。同时还发现催化剂中Na和Cr对铁有很强的助分散作用。     

Formation of arrays of gallium nitride nanorods within mesoporous silica SBA-15

We report the first formation of arrays of GaN nanorods inside the nanoscale channels of mesoporous silica SBA-15. GaCl3 dissolved in toluene was incorporated into the methyl group-functionalized SBA-15 powder. The pore surfaces functionalized with methyl groups should facilitate the impregnation with GaCl3. Formation of GaN nanorod arrays within SBA-15 was carried out by heating the powder to 700 degrees C for 3 h under nitrogen atmosphere, followed by ammonolysis at 900 degrees C for 5 h. epsilon-Ga2O3, an unusual phase for Ga2O3, formed after the first thermal process and was converted into wurtzite GaN during ammonolysis. The final products have been characterized by FT-IR spectra, powder XRD patterns, TEM images and SAED patterns, EDS analysis, and nitrogen adsorption-desorption isotherm measurements to confirm the presence of GaN nanostructures. The nanorods are 6-7.5 nm in diameter, and can be a few hundreds of a nanometer in length to exhibit nanowire structure. Free-standing GaN nanorod arrays were revealed upon removal of the silica framework with HF solution. Optical characterization of the isolated GaN nanorod arrays shows a strong and sharp near band-edge emission at 375 nm, and two phonon-assisted donor-acceptor peaks at 395 and 415 nm. A broad but weak emission in the region of 335-360 nm due to the quantum confinement effect of short nanorods was observed.