Application of multiple quench parameters for confirmation of radionuclide identity in radioanalytical quality control

Journal of Radioanalytical and Nuclear Chemistry - Robust and reliable radiochemical analysis is the key factor in the appropriate disposal and management of radioactive wastes arising from the...     

The influence of compression conditions on the peculiarities of self-propagating exothermal reaction in Al–Ni powder reactive materials

The paper deals with the effect of the compression conditions on the propagation front velocity of exothermal reaction and the specific heat release in Al–Ni powder reactive materials with mean particle sizes of 70–110 nm. It was shown that the velocity increases from 2.7 to 8 cm s^?1 and comes to saturation with the lowering of the porosity (η) from 0.91 to 0.34, while the dependence of the specific heat release has its maximum for η?=?0.5. The results of the X-ray diffraction analysis obtained in situ during the sample heating suggest that the sequence of phase transformations in the system does not depend on the porosity. In all cases, first in the temperature range of ~?500–540 °C the NiAl compound is formed. With the further heating up to ~?640 °C, the Ni₃Al, Ni₂Al₃ and NiAl₃ compounds are additionally formed. The calculation of kinetic parameters was performed using the obtained curves of the differential scanning calorimetry: activation energy, pre-exponential factor and reaction model. The comparison of the calculated results and the scanning electron microscopy data has shown that such behavior of the Al–Ni system with the porosity lowering occurs due to the growth of the transformation degree and is associated with the presence in the final powder mixture of mutually non-contacting Al and Ni agglomerates with the dimensions of over 10 μm.     

A Characterization of Finitely Decidable Congruence Modular Varieties

For every finitely generated, congruence modular variety of finite type we find a finite family of finite rings such that the variety is finitely decidable if and only if is congruence permutable and residually small, all solvable congruences in finite algebras from are Abelian, each congruence above the centralizer of the monolith of a subdirectly irreducible algebra from is comparable with all congruences of , each homomorphic image of a subdirectly irreducible algebra with a non-Abelian monolith has a non-Abelian monolith, and, for each ring from , the variety of -modules is finitely decidable.

     

DFT study of Co-C bond cleavage in the neutral and one-electron-reduced alkyl-cobalt(III) phthalocyanines

Density functional theory (DFT) has been applied to the analysis of the structural and electronic properties of the alkyl-cobalt(III) phthalocyanine complexes, [CoIIIPc]-R (Pc = phthalocyanine, R = Me or Et), and their pyridine adducts. The BP86/6-31G(d) level of theory shows good reliability for the optimized axial bond lengths and bond dissociation energies (BDEs). The mechanism of the reductive cleavage was probed for the [CoIIIPc]-Me complex which is known as a highly effective methyl group donor. In the present analysis, which follows a recent study on the reductive Co-C bond cleavage in methylcobalamin (J. Phys. Chem. B 2007, 111, 7638-7645), it is demonstrated that addition of an electron and formation of the pi-anion radical [CoIII(Pc*)]-Me- significantly lowers the energetic barrier required for homolytic Co-C bond dissociation. Such BDE lowering in [CoIII(Pc*)]-Me- arises from the involvement of two electronic states: upon electron addition, a quasi-degenerate pi*Pc state is initially formed, but when the cobalt-carbon bond is stretched, the unpaired electron moves to a sigma*Co-C state and the final cleavage involves the three-electron (sigma)2(sigma*)1 bond. As in corrin complexes, the pi*Pc-sigma*Co-C states crossing does not take place at the equilibrium geometry of [CoIII(Pc*)]-Me- but only when the Co-C bond is stretched to approximately 2.3 A. The DFT computed Co-C BDE of 23.3 kcal/mol in the one-electron-reduced phthalocyanine species, [CoIII(Pc*)]-Me-, is lowered by approximately 37% compared to the neutral Py-[CoIIIPc]-Me complex where BDE = 36.8 kcal/mol. A similar comparison for the corrin-containing complexes shows that a DFT computed BDE of 20.4 kcal/mol for [CoIII(corrin*)]-Me leads to approximately 45% bond strength reduction, in comparison to 37.0 kcal/mol for Im-[CoIII(corrin)]-Me+. These results suggest some preference by the alkylcorrinoids for the reductive cleavage mechanism.     

The origin of open circuit voltage of porphyrin-sensitised TiO(2) solar cells

Electron lifetime and diffusion coefficient measurements in highly efficient porphyrin-sensitised TiO(2) solar cells showed reduced electron lifetime, and consequently, lower photo-induced electron density under illumination compared to commonly used ruthenium dye (N719)-sensitised solar cells, which is proposed to be the origin of the generally lower open circuit voltage.     

Direct catalytic asymmetric three-component Mannich reactions with dihydroxyacetone: enantioselective synthesis of amino sugar derivatives

Highly enantioselective, amino acid-catalyzed, one-pot three-component asymmetric Mannich reactions between dihydroxyacetone, p-anisidine, and aldehydes are presented. The reactions proceeded with high chemo- and stereoselectivity and furnished the corresponding α,α′-dihydroxy-β-aminoketones in high yields with 82-95% ee.     

Photophysical characterization of imidazolium-substituted Pd(II), In(III), and Zn(II) porphyrins as photosensitizers for photodynamic therapy

The photophysical properties of four imidazolium-substituted metalloporphyrins have been assessed to gain insights into the relative efficacy of the compounds for photodynamic therapy (PDT). A set of zinc(II), palladium(II), and chloro-indium(III) porphyrins all bear a net positive charge owing to the diethylimidazolium unit; one zinc chelate bears a negative charge owing to a bis(sulfobutyl)imidazolium unit. The photophysical properties of the cationic and anionic zinc porphyrins are very similar to one another in organic solvents, phosphate-buffered saline, and in the presence of bovine serum albumin. The properties of the zinc and palladium porphyrins bearing charged peripheral groups are generally similar to those of neutral analogs in organic solvents. The palladium porphyrin shows an essentially quantitative yield (≥0.99) of the triplet excited state compared to the zinc porphyrins (0.9), and all are quantitatively quenched (at the diffusion limit) by molecular oxygen in air-saturated fluid solution. If the rate constant and yield of quenching of the triplet excited state by energy or electron transfer to molecular oxygen is the same in the cellular environment as in solution, then these processes combined with the triplet yield contribute only a factor of 1.3 to the higher PDT activity of analogous palladium versus zinc porphyrins, which is much smaller than what is observed. Therefore, other factors such as transient reduction of the excited porphyrin or delivery to the target site must predominantly underlie the difference in PDT efficacy of these sensitizers.     

Theoretical analysis of core size effect in metalloporphyrins

Density functional theory has been applied to a series of unsubstituted planar metalloporphyrins (MPs) to elucidate how geometry and frequencies correlate with the metal-nitrogen distance, referred to as the core size. Different transition metals can invoke expansion or contraction of the porphyrin core due to electronic effects resulting from the amount of d-electron pairing as well as occupancy of the d(x(2)(-y(2))) orbital. A full vibrational analysis consisting of all in-plane and out-of-plane frequencies was carried out, and the resulting modes were plotted against core size for a linear analysis and grouped within symmetry blocks. The modes were separated according to planarity, and all modes with a large slope and best fit greater than 0.8 were considered sensitive to metal-nitrogen distances. All planar skeletal modes above 1450 cm(-1), including the pyrolle ring deformations, are found to be core-size sensitive. The most significant out-of-plane modes sensitive to core size are gamma(8) and gamma(9), which are infrared active and grouped within the A(2u) symmetry block. The present work also opens possible quantitative applications for the correlation of spectroscopic properties of MPs and heme proteins with actual structural parameters.     

One-pot catalytic enantioselective domino nitro-michael/michael synthesis of cyclopentanes with four stereocenters

A highly enantioselective organocatalytic one-pot synthesis of nitro-, formyl-, and ester-functionalized cyclopentanes with four stereocenters is presented. The cyclopentanes were formed as a predominant diasteroisomer and isolated in high yields with 97-99 % ee.     

Self-assembled monolayer of alkanephosphoric acid on nanotextured Ti

Surface modification of titanium and its alloys is of great importance for their practical application as biomedical implants. We have studied and compared assembly of dodecylphosphoric acid on commercial polished and on nanostructured titanium disks. The latter were produced by chemical etching that created nanoscale pits of typical size of about 20 nm. Enhanced hydrophobicity and high molecular density were obtained after functionalization of the nanotextured substrate. Aging tests showed a lifetime of the organic films of about one month in phosphate buffer. The samples were characterized by means of infrared spectroscopy, contact angle measurements, ellipsometry, and atomic force and scanning tunneling microscopies.