利用LNG冷(火用)的准零CO2排放循环探析

本文研究利用LNG冷(火用)来完善燃用它的热机性能,既提高了效率,又能回收用LNG燃料热机的唯一主要排放-CO2.这种系统的温度区间横跨大气温度,会有很多新的特点值得探索.作为前期研究,本文建议了两种新循环,分别基于Brayton循环与超临界Rankine循环,且分别适用于LNG超临界及亚临界汽化过程.文中对此两种循环进行了分析计算与讨论,说明建议是可行的,热机效率可达60%以上,且同时基本回收所有燃烧产生的CO2.     

Effects of Signal Spectrum Bandwidth on Different PMD Compensation Feedback Methods

We compared efficiencies of different PMD compensation feedback methods against transmission signal bandwidth,including NRZ, RZ, CRZ format under various duty cycles. We found that the critical factor determining the efficiency of PMD compensation is not the modulation format, but the spectral bandwidth of the transmission signal.     

氨水工质浓度可调型功冷联供循环

本文提出一个新型氨水工质功冷联供循环,由氨水Rankine子循环和氨吸收式制冷子循环通过吸收、分离及换热过程耦合而成,可采用燃气轮机排烟等中低温热源驱动.通过设置分流、吸收式冷凝实现系统内氨水工质浓度变换,兼顾动力子循环加热蒸发和冷凝过程不同的浓度需求,达到改善换热过程匹配和提高透平作功能力的目的.计算表明,当透平进气温度为450℃时,循环热效率达25%～28%,??效率达45%～53%;且存在最佳分流比使热效率及??效率达到最佳.     

Pd-Si binary bulk metallic glass

Pd_80+x Si_20−x (x = 0, 1, and 2) binary metallic glasses with the diameter ranging from 7 to 8 mm were prepared by a combination of fluxing and water quenching or air cooling. Thermal analysis results show that with increasing Si content, the glass transition temperature T _g, the initial crystallization temperature T _x and the onset crystallization temperature T _p of Pd-Si binary glassy alloys increase. Moreover, the supercooled liquid region reaches 61 K. It indicates that Pd-Si binary alloys possess large glass forming ability, which can be greatly improved by fluxing treatment. Supported by the National Basic Research Program of China (Grant No. 2007CB613905) and the National Natural Science Foundation of China (Grant Nos. 50671050 and 50431030)     

扇贝微量元素的测定

以高压硝化罐消化样品,利用电感耦合等离子体原子发射光谱(ICP-AES)法和火焰原子吸收(AAS)法分别测定了扇贝中的Zn,Co,Fe,Mn,Mg,Ca,Cu,K共八种微量元素的含量, 并对两种分析方法进行了分析比较b 结果表明,ICP-AES法和AAS法测定的微量元素无显著性差异, ICP-AES稍优。方法回收率在93.3%～102.8%之间,相对标准偏差均小于1.60%。扇贝含有丰富对人体有益微量元素,不但味道鲜美,而且可以补充人体所必需的微量元素。     

Light transmission properties of double-overlapped annular apertures

We investigate the light transmission properties of double-overlapped annular apertures in a silver film with the three-dimensional finite-difference time-domain method. It has been found that the transmission peaks are attributed to the localized surface plasmon resonance (LSPR) of nanocavities and the surface plasmon polaritons (SPPs) of the nanoparticles. The peaks of the LSPR are blueshifted when the overlapping distance is increased. Moreover, a Fano-type resonance appears in the transmitted spectral response with an appropriate overlapping distance, which is elucidated as the hybridization results of the SPPs of the nanoparticles. The number and position of the Fano resonance can be tuned through varying the overlapping distance and other geometric parameters.     

Synthesis and characterization of “mulberry”-like Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/multiwalled carbon nanotube nanocomposites

Nanocomposites composed of multi-wall carbon nanotubes (MWNTs) and Fe₃O₄ nanoparticles were fabricated using solvothermal method. Transmission and scanning electron microscopy, energy dispersive spectroscopy, and X-ray powder diffraction measurements confirmed that these mulberry-like Fe₃O₄ microparticles which were combined with the MWNTs in a random pattern are constructed with tiny nanocrystallites (12 nm in average diameter). The magnetic properties of the Fe₃O₄/MWNTs nanocomposites were measured using a vibrating sample magnetometer. Results showed that the Fe₃O₄/MWNTs nanocomposites exhibited superparamagnetism at room temperature and possessed a lower saturation magnetization (around 27.6 emu/g) than that of the pure Fe₃O₄ nanoparticles (around 33.7 emu/g). The Fe₃O₄/MWNTs nanocomposites have potential applications in engineering and medicine.     

Multi-modal calculations of prompt fission neutrons from 238U（n,f） at low induced energy

Properties of prompt fission neutrons from ²³⁸U(n, f) are calculated for incident neutron energies below 6 MeV using the multi-modal model, including the prompt fission neutron spectrum, the average prompt fission neutron multiplicity, and the prompt fission neutron multiplicity as a function of the fission fragment mass υ(A) (usually named “sawtooth” data) The three most dominant fission modes are taken into account. The model parameters are determined on the basis of experimental fission fragment data. The predicted results are in good agreement with the experimental data.     

Simulation of polarization effects in AlGaN/GaN heterojunction

Because of their large band-gap, large high-field electron velocity, large breakdownfield, and large thermal conductivity, GaN and its heterojunction with AlGaN and InGaNhave foreseeable potential in the applications of high-power/temperature electronics, andoptoelectronic devices operative in UV and visible wavelength. Polarization inducedelectric field can reach the magnitude of ~MV/cm[1,2]. For AlGaN/GaN based FETs theconcentration of sheet carrier induced by polarization in the cha…     

Formation of Pd-Ni Based Bulk Metallic Glasses

Bulk metallic glasses are prepared in Pd4o.sNi4o.sSixP19-x （x = 0-14 at.%） alloys by a combination of flux treatment and water quenching technique. It is found that the thermal stability of the Pd4o.sNi4o.sSixP19=x glassy alloys depends on the addition of Si content. Among the Pd4o.sNi4o.sSixP19=x glassy alloys studied, the Pd4o.sNi4o.sSisPls bulk metallic glass exhibits the largest supercooled liquid region （△T = 119 K） and the highest activation energy of crystallization （283.3k J/tool）, showing enhanced glass formation ability and extraordinary glassy thermal stability.