Fluorescence imaging of Cu(I) in endoplasmic reticulum of live cells and tissue

Science China Chemistry -     

Mass spectrometry analysis of in vitro nitration of a recombinant human IgG1 monoclonal antibody

Nitration of a recombinant human monoclonal antibody was carried out in vitro by incubating the antibody with the nitrating reagent tetranitromethane (TNM). The susceptible sites of nitration were identified using high-performance liquid chromatography/mass spectrometry (HPLC/MS). In general, tyrosine residues in the variable domains of the antibody are more susceptible to nitration, while tyrosine residues in the constant domains are relatively resistant to nitration. However, one tyrosine residue in the CH1 domain and one tyrosine residue in the CH2 domain are highly susceptible to nitration. Interestingly, the susceptible tyrosine residue in the CH2 domain is followed by the conserved asparagine residue that is glycosylated.     

Automated system for simultaneous analysis of delta(13)C, delta(18)O and CO(2) concentrations in small air samples

In this paper we present an automated system for simultaneous measurement of CO(2) concentration, delta(13)C and delta(18)O from small (<1 mL) air samples in a short period of time (approximately 1 hour). This system combines continuous-flow isotope ratio mass spectrometry (CF-IRMS) and gas chromatography (GC) with an inlet system similar to conventional dual-inlet methods permitting several measurement cycles of standard and sample air. Analogous to the dual-inlet method, the precision of this system increases with the number of replicate cycles measured. The standard error of the mean for a measurement with this system is 0.7 ppm for the CO(2) concentration and 0.05 per thousand for the delta(13)C and delta(18)O with four replicate cycles and 0.4 ppm and 0.03 per thousand respectively with nine replicate cycles. The mean offset of our measurements from NOAA/CMDL analyzed air samples was 0.08 ppm for the CO(2) concentration, 0.01 per thousand for delta(13)C and 0.00 per thousand for delta(18)O. A specific list of the parts and operation of the system is detailed as well as some of the applications for micrometeorological and ecophysiological applications.     

Applications of array biosensor for detection of food allergens

Although food is a necessity, compounds within food products can be dangerous and life-threatening for people with food allergies. These allergy-causing compounds, such as proteins from eggs and milk, must be identified on the labels of commercial products. Unintentional contamination of food with these compounds occurs as a result of storage, manufacturing procedures, or cleaning procedures. A sensitive, specific, and rapid method to identify foods containing allergens is required by the food industry. The array biosensor, a rapid detection system, may provide a solution to this need. The array biosensor performs fluorescent immunoassays on the surface of a planar waveguide by first running samples, then fluorescently labeled antibodies, over a surface patterned with capture antibodies. An optical image is captured by a charged-coupled device camera and converted into fluorescence values. Signal intensity and spot location provide information on the compound and its concentration. The array biosensor has been successfully demonstrated for toxin, bacteria, and virus detection at low levels in under 20 min in food, clinical samples, and environmental matrixes. An assay for detection of ovalbumin as an indicator of egg contamination has been developed with limits of detection of 25 pg/mL in buffer and 1.3 ng/mL (13 ng/g) in non-egg pasta extract (buffer:pasta 10:1, v/w).     

Study of the carbonyl products of terpene/OH radical reactions: detection of the 2,4-DNPH derivatives by HPLC-MS

The oxidation of the terpenes - and -pinene, limonene and ³-carene by hydroxyl radicals has been investigated in a fast-flow reactor coupled to a liquid nitrogen trap for collecting the carbonyl compounds. Identification of the products was performed via 2,4-dinitrophenylhydrazone (DNPH) derivatization of the carbonyls to form the mono- and di-DNPH derivatives, which were analysed by high-performance liquid chromatographic (HPLC)-DAD (diode array detector) and HPLC-mass spectrometry (HPLC-MS). Both electrospray ionization [ESI(–)] and atmospheric pressure chemical ionization [APCI(–)] were suitable for the detection of the DNPH derivatives of formaldehyde, acetaldehyde, myrtanal, campholene aldehyde, perillaldehyde, acetone, nopinone, trans-4-hydroxynopinone and 4-acetyl-1-methylcyclohexene. Also the mono-DNPH derivatives of the dicarbonyl compounds pinonaldehyde, endolim and caronaldehyde could be identified. The MS² spectra generated in the ion trap of the mass spectrometer allowed us to distinguish between aldehydes and ketones on the basis of the characteristic fragment ion m/z 163 for the aldehydes. For the quantitative analysis of the mono-DNPH derivatives, ESI(–) in combination with single ion monitoring (SIM) detection showed the lowest detection limits. For the quantification of the dicarbonyl compounds, the acid-sensitive di-DNPH derivatives had to be formed by keeping the acidity in the acid-catalysed derivatization reaction at about 1.7 mM H₂SO₄. Detection of these dicarbonyl compounds can only be performed by APCI(–) with somewhat lesser sensitivity than by HPLC-DAD.     

Identification of 4-amino-4-deoxychorismate synthase as the molecular target for the antimicrobial action of (6s)-6-fluoroshikimate

(6S)-6-Fluoroshikimate has antimicrobial activity. The molecular basis of this effect had not been identified, but there was speculation that (6S)-6-fluoroshikimate is first converted in vivo into 2-fluorochorismate, which then could inhibit 4-amino-4-deoxychorismate synthase (ADCS). 2-Fluorochorismate was prepared from E-fluorophosphoenolpyruvate and erythose-4-phosphate by the sequential reactions of DAHP synthase, dehydroquinate synthase, dehydroquinase, shikimate dehydrogenase, EPSP synthase, and chorismate synthase. Inhibition studies on ADCS showed that it was inhibited rapidly and irreversibly by 2-fluorochorismate. Electrospray mass spectrometry of the inactivated enzyme showed an additional mass of 198 +/- 10 Da. A novel peptide of 1087.6 Da was identified in the HPLC trace for the tryptic digest of 2-fluorochorismate-inactivated ADCS. Sequencing of this peptide by MS/MS showed that the peptide corresponded to residues 272-279 with a modification of 206.1 Da on Lys-274. This observation is particularly exciting in the context of a recent proposal for the catalytic mechanism of ADCS.     

Novel carbohydrate-appended metal complexes for potential use in molecular imaging

Seven discrete sugar-pendant diamines were complexed to the {M(CO)(3)}(+) ((99m)Tc/Re) core: 1,3-diamino-2-propyl beta-D-glucopyranoside (L(1)), 1,3-diamino-2-propyl beta-D-xylopyranoside (L(2)), 1,3-diamino-2-propyl alpha-D-mannopyranoside (L(3)), 1,3-diamino-2-propyl alpha-D-galactopyranoside (L(4)), 1,3-diamino-2-propyl beta-D-galactopyranoside (L(5)), 1,3-diamino-2-propyl beta-(alpha-D-glucopyranosyl-(1,4)-D-glucopyranoside) (L(6)), and bis(aminomethyl)bis[(beta-D-glucopyranosyloxy)methyl]methane (L(7)). The Re complexes [Re(L(1)-L(7))(Br)(CO)(3)] were characterized by (1)H and (13)C 1D/2D NMR spectroscopy which confirmed the pendant nature of the carbohydrate moieties in solution. Additional characterization was provided by IR spectroscopy, elemental analysis, and mass spectrometry. Two analogues, [Re(L(2))(CO)(3)Br] and [Re(L(3))(CO)(3)Br], were characterized in the solid state by X-ray crystallography and represent the first reported structures of Re organometallic carbohydrate compounds. Conductivity measurements in H(2)O established that the complexes exist as [Re(L(1)-L(7))(H(2)O)(CO)(3)]Br in aqueous conditions. Radiolabelling of L(1)-L(7) with [(99m)Tc(H(2)O)(3)(CO)(3)](+) afforded in high yield compounds of identical character to the Re analogues. The radiolabelled compounds were determined to exhibit high in vitro stability towards ligand exchange in the presence of an excess of either cysteine or histidine over a 24 h period.     

Measuring trihalomethane concentrations in water using supported capillary membrane sampling-gas chromatography

The objective of this study was to develop and evaluate a supported capillary membrane sampling-gas chromatography method for the analysis of trihalomethanes (THMs) in drinking water. The effects of experimental parameters, such as flow rate of carrier gas, water temperature, ionic strengths of solutions and transfer line temperature on the system performance were investigated. The results of method detection limit and accuracy and precision studies are reported.     

Pressure‐Tuneable Visible‐Range Band Gap in the Ionic Spinel Tin Nitride

The application of pressure allows systematic tuning of the charge density of a material cleanly, that is, without changes to the chemical composition via dopants, and exploratory high‐pressure experiments can inform the design of bulk syntheses of materials that benefit from their properties under compression. The electronic and structural response of semiconducting tin nitride Sn₃N₄ under compression is now reported. A continuous opening of the optical band gap was observed from 1.3 eV to 3.0 eV over a range of 100 GPa, a 540 nm blue‐shift spanning the entire visible spectrum. The pressure‐mediated band gap opening is general to this material across numerous high‐density polymorphs, implicating the predominant ionic bonding in the material as the cause. The rate of decompression to ambient conditions permits access to recoverable metastable states with varying band gaps energies, opening the possibility of pressure‐tuneable electronic properties for future applications.