Atomic spectroscopy for detection in thermal analysis

An atomic absorption spectrophotometer is coupled to a conventional thermoanalytical quartz furnace as used for TG and DTG to detect the thermally evolved products. In this combined system, the dry aerosol (smoke) obtained by cooling the vapour evolved is transported from the furnace to the flame for metal-specific atomic absorption detection. The particular design of the furnace outlet promotes the formation of stable aerosols. Optimum experimental conditions were determined, using zinc chloride solution, by varying the specimen mass, the heating rate and the flow rate of the furnace gas at a linear temperature program. The absorbancevs. temperature curves obtained with this method for various zinc compounds are compared with the corresponding DTG curves. The applicability of the technique for studying heterogeneous reactions with carbon tetrachloride and hexane vapours is presented. The utilization of an atomic absorption spectrophotometer equipped with a quartz cuvette for detecting the thermal evolution of mercury vapours is described, as well as detection potentials by molecular absorption (for NO and NH₃) and light scattering (for smoke evolved from organic matter). The results obtained with the suggested methods may, in some respects, valuably complement the results achieved with DTG and with flame ionization detection.

---

Zusammenfassung Ein Atomabsorptionsspektrometer wurde mit einem konventionellen thermoanalytischen Quarzofen gekoppelt um thermische Abspaltprodukte nachzuweisen. In diesem kombinierten System wird das durch Kühlung des entwickelten Dampfes erhaltene Aerosol (Rauch) vom Ofen in die Flamme für den metallspezifischen Atomabsorptionsnachweis übergeleitet. Die spezielle Ausbildung der Austrittsöffnung gewährleistet die Bildung eines stabilen Aerosols. Die optimalen Versuchsbedingungen wurden durch Zinkchloridlösungen bei Anderung der Probenmasse, der Aufheizgeschwindigkeit und der Strömungsgeschwindigkeit des Ofengases im linearen Temperaturprogramm ermittelt. Die mit dieser Methode für verschiedene Zinkverbindungen erhaltenen Absorptions—Temperatur-Kurven wurden mit den entsprechenden DTG-Kurven verglichen. Die Anwendbarkeit dieser Technik bei dem Studium heterogener Reaktionen mit Kohlenstofftetrachlorid und Hexandämpfen wird gezeigt. Der Einsatz eines mit einer Quarzküvette zum Nachweis der thermischen Entwicklung von Quecksilberdampf versehenen Atomabsorptionsspektrometers wird beschrieben, sowie die Nachweisgrenze durch molekulare Absorption (für NO und NH₃) und Lichtstreuung (für aus organischem Material entwickelten Rauch). Die bei den beschriebenen Methoden erhaltenen Ergebnisse können, in mancher Hinsicht, die durch DTG und Flammenionisationsnachweis erhaltenen Ergebnisse wertvoll ergänzen.

---

- , , . (), , . . , . — , , -. . - , , , ( NO NH₃) ( , ). , , , - .

---

---

Presented in part at the 24th Hungarian Conference on Analytical Sptecroscopy, Miskolc, June 15–18, 1981. Abstracts pp. 159–162.

---

The authors wish to express their thanks to S. Gál for his assistance in the present application of the temperature programmer developed by him and his group, and for the valuable discussions on the subject. Thanks are also due to K. Tomor and J. Kmives who participated in the comparative thermoanalytical measurements and their analysis.     

Determination of gentamycin by synchronous derivative fluorimetry

Use of synchronous first-derivative fluorimetry for determination of gentamycin is described. Gentamycin reacts with acetylacetone and formaldehyde in pH 5.6 HOAc/NaOAc buffer solution to form N-gentamyl-2,6-dimethyl-3,5-diacethyl-1,4-dihydropyridine[I] which is a fluorescent substance. Spectra of [I] and the reagent blank can be separated with synchronous derivative fluorimetry, and gentamycin can be determined directly. The synchronous spectral peaks of [I] and the reagent blank are at 434 and 411 nm, respectively. The first-derivative peak of [I] is at 425 nm. Effects of pH, foreign ions, buffer system, and heating time on the determination of gentamycin have been examined. The linear regression equation of the calibration graph is C=0.0513H-0.0416, with a correlation coefficient of linear regression of 0.9978. C means total potency of gentamycin: U ml(-1); H means peak height in the linear regression equation calibration graph. The linear range for the determination of gentamycin is from 0.00 to 3.00 U ml(-1). Recovery is from 95.06 to 112.0%, R.S.D. of 3.8%. The results determined by the fluorimetric method agreed roughly with those by the microbiological method. The method is simple and has low detection limit.     

Cloud-point preconcentration of fulvic and humic acids

The cloud-point extraction technique was used for preconcentration of fulvic and humic acids. The effect of the acidity of solution, the equilibration temperature and time, the amount of added surfactant (Triton X-100) and the time of centrifugation on the recovery were examined. The recoveries of fulvic and humic acids achieved under optimised conditions were 82% and 96%, respectively.     

Benzindoles. 23. 2-formyl- and 3-formyl-4,5-benzindoles

It is shown that, in addition to the usually formed 3-formyl-4,5-benzindole, 2-formyl-4,5-benzindole can be obtained via the Vilsmeier reaction. The IR, PMR, and UV spectra of the 2- and 3-formyl isomers are compared, and their possible conformations are discussed.See [1] for Communication 22.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 343–345, March, 1984.     

Identification of impurities accumulated in the extractant in the course of purification of wet-process phosphoric acid with tri-<Emphasis Type="Italic">n</Emphasis>-butyl phosphate

Impurities accumulated in the extractant in the course of operation of the plant for purification of wet-process phosphoric acid, obtained from apatite concentrate, by extraction with tri-n-butyl phosphate are identified by IR and mass spectra.Translated from Zhurnal Prikladnoi Khimii, Vol. 77, No. 9, 2004, pp. 1425–1429.Original Russian Text Copyright © 2004 by Lembrikov, Konyakhina, Volkova, Perov, Kiseleva, Ershova.     

Multipeak distributions of first passage times in bistable dynamics in a model of a thermochemical system.

A master equation is used to study transitions between the stable limit cycle and stable focus in the two-variable bistable system. The distribution function of the mean first passage time between these attractors and the relative dispersion of the mean first return time from the stable focus to itself as a function of the intensity of fluctuations are calculated and discussed. A coherence resonance is observed for the return time from the focus to itself.     

Dipole moments,molar Kerr coefficients,and structures of certain substituted bicyclo[2, 2, 2] octenes and their epoxy derivatives

Russian Chemical Bulletin -     

The formation of filamentous structures from iodinated neurotubules.

The porcine neurotubule and its basic subunit were found to be modified in vitro by iodination of amino acids (principally tyrosine) using lactoperoxidase. Iodide ion, H2O2, or lactoperoxidase singly or in any pairwise combination had virtually no effect on neurotubules. However, when all three reagents were present, permitting covalent iodination, it was found that at 0.1 iodotyrosines per tubulin dimer the microtubules unravel to form structures which morphologically resemble strands of protofilaments twisted or wound around each other. These abnormal tubules are stable at room temperature and 4 degrees C. Both monomers of tubulin are labeled to approximately the same extent. Iodinated tubulin (0.1 iodotyrosines/dimer) is unable to assemble in vitro under normal assembly conditions. Heavily iodinated microtubules (8 iodines per tubulin dimer) are similar in morphology to the slightly iodinated structures.     

Phosphorylthioacetamides in the synthesis of annulated quinoxalines

Diethoxyphosphorylthioacetamide in the reaction with 2,3-dichloroquinoxaline acted as a thionating reagent, giving diethoxyphosphorylacetonitrile and 2-chloro-3-[(3-chloro-2-quinoxalinyl)thio]quinoxaline. Reactions of phosphorylthioacetamides with N-methylquinoxalinium iodide in alcohol media in the presence of a base proceeded stereoselectively to afford cis-3-phosphoryl-1,3,3a,4,9,9a-hexahydro-2H-pyrrolo[2,3-b]quinoxaline-2-thiones. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 1010–1013, May, 2007.