Peroxidase Activity May Play a Role in the Cytotoxic Effect of Indole Acetic Acid*

Peroxidase activity in neutrophils is higher than in thioglycollate macrophages, while in lymphocytes this enzyme activity is very low. Indole-3-acetic acid is oxidized by peroxidase and the role of this enzyme in the cytotoxic effect of the compound was evaluated by measuring oxygen consumption, light emission and cell death in neutrophils, macrophages and lymphocytes. The increase in light emission, oxygen consumption and rate of cell death in cells cultured in the presence of indole-3-acetic acid presented a direct correlation with the peroxidase activity of the cells as follows: neutrophils > thioglycollate macrophages > resident macrophages > lymphocytes. Indeed, in lymphocytes that possess very low peroxidase activity, indole-3-acetic acid did not result in an increase in light emission or oxygen consumption and it was not cytotoxic.     

Order parameter fluctuation spectrum and central peak in partially deuterated H-bonded ferroelectrics

The order parameter fluctuation spectrum in an isotopically disordered KH₂PO₄ type crystal has been evaluated as a function of the deuterium content using Mori's continued fraction representation. In contrast to a pure system we have now two narrow central peaks and two overdamped soft modes. The results show that the static central peak observed by light scattering in paraelectric KH₂PO₄ cannot be produced by naturally abundant deuterium.     

On the difficulties of predicting the adsorption of volatile organic compounds at low pressures in microporous solid: the example of ethyl benzene

Adsorption isotherms of toluene and ethyl benzene, at 25 degrees C and 40 degrees C, were determined in two microporous activated carbons and one zeolite. Significant differences were found in the adsorption behavior, at low pressures, between the two vapors on the same adsorbent material. The quantities of adsorbed ethyl benzene at 25 degrees C, in the low-pressure region, were lower than what was observed at 40 degrees C in all the studied adsorbents, contrary to what was found for toluene. This fact was not related to kinetic effects at the two temperatures nor to vapor swelling of the adsorbents structure. Also, there was no molecular sieving since at high pressures the toluene and ethyl benzene occupied the same adsorption space. The differences found in the ethyl benzene adsorption at the two temperatures pose difficulties in the analysis of the adsorption data and, therefore, in the prediction of results. This is discussed in the analysis of the results with the application of the Dubinin-Astakhov equation and in the estimation of the isosteric heats of adsorption. The adsorption potentials of two possible ethyl benzene conformations were estimated for the adsorption in the pores of activated carbon from the Horvath and Kawazoe model, and the values compared with those found experimentally. The results were interpreted in terms of the ethyl benzene conformation effects when the molecule is confined in pores that are about the same size of one of the conformations.     

Study of the structural, dielectric and magnetic properties of Bi2O3 and PbO addition on BiFeO3 ceramic matrix

In this paper we studied the effects of Bi₂O₃ and PbO addition on BiFeO₃ (BFO) ceramic matrix. The structural, dielectric and magnetic properties of fifteen BFO samples were discussed in view of possible applications in RF and microwave devices. The present work also reports the preparation of the samples. Polyvinyl alcohol (PVA) and tetraethyl orthosilicate (TEOS) were also added as a binder in the fabrication procedure. The samples have been studied by X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and magnetic hysteresis measurements. Further, a study based on impedance spectroscopy also has been done. Dielectric permittivity (ε′) and dielectric loss (tan δ) were measured at room temperature in the frequency range 100 Hz-10 MHz, as well as a.c. conductivity. The -Im[Z(f)] versus Re[Z(f)] plot has been obtained. The samples were investigated in view of possible applications like miniaturized filters, diplexers and dielectric resonator antennas (DRA). In the RF and MW frequency region, the application of magneto-dielectric and multiferroic perovskite composite materials is desirable for the miniaturization of components.     

Surface heterogeneity effects of activated carbons on the kinetics of paracetamol removal from aqueous solution

The removal of a compound with therapeutic activity (paracetamol) from aqueous solutions using chemically modified activated carbons has been investigated. The chemical nature of the activated carbon material was modified by wet oxidation, so as to study the effect of the carbon surface chemistry and composition on the removal of paracetamol. The surface heterogeneity of the carbon created upon oxidation was found to be a determinant in the adsorption capability of the modified adsorbents, as well as in the rate of paracetamol removal. The experimental kinetic data were fitted to the pseudo-second order and intraparticle diffusion models. The parameters obtained were linked to the textural and chemical features of the activated carbons. After oxidation the wettability of the carbon is enhanced, which favors the transfer of paracetamol molecules to the carbon pores (smaller boundary layer thickness). At the same time the overall adsorption rate and removal efficiency are reduced in the oxidized carbon due to the competitive effect of water molecules.     

Solvatochromism of 2‐(N,N‐dimethylamino)‐7‐nitrofluorene and the natural dye β‐carotene: application for the determination of solvent dipolarity and polarizability

The effects of solvents on chemical phenomena (rate and equilibrium constants, spectroscopic transitions, etc.) are conveniently described by solvation free‐energy relationships that take into account solvent acidity, basicity and dipolarity/polarizability. The latter can be separated into its components by manipulating the UV–vis spectra of two solvatochromic probes, 2‐(N,N‐dimethylamino)‐7‐nitrofluorene (DMANF) and a di‐(tert‐butyl)‐tetramethyl docosanonaen probe (ttbP9) whose synthesis is laborious and expensive. Recently, we have shown that the natural dye β‐carotene can be conveniently employed instead of ttbP9 for the determination of solvent polarizability (SP) of 76 molecular solvents and four ionic liquids. In the present work, we report the polarizabilities of further 24 solvents. Based on the solvatochromism of β‐carotene and DMANF, we have calculated solvent dipolarity (SD) for 103 protic and aprotic molecular solvents, and ionic liquids. The dependence of SD and SP on the number of carbon atoms in the acyl‐ or alkyl group of several homologous series (alcohols; 2‐alkoxyethanols; carboxylic acid‐ anhydrides, and esters, ionic liquids) is calculated and briefly discussed. Copyright © 2013 John Wiley & Sons, Ltd.     

Double-imprinted polymer based on cross-linked poly(vinylimidazole–trimethylolpropane trimethacrylate) in solid phase extraction for determination of lead from wastewater samples by UV–vis spectrophotometry

The monitoring of the heavy metal pollution in wastewater is increasingly becoming a crucial global issue since they tend to accumulate in food chains and can cause many biological abnormalities. In this work, it was developed a novel lead ion-imprinted polymer (IIP) using sodium dodecyl sulphate (SDS) as a second template to be used as adsorbent in solid phase extraction (SPE) for determination of lead from wastewater samples by UV–vis spectrophotometry. The polymer called IIP–SDS was synthesised by a double-imprinting process with lead (template) and SDS (template). IIP–SDS was characterised by infrared spectroscopy Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy. IIP–SDS showed good recovery for lead (around 82.0%), while the IIP (only lead as template) was 72.2% and non-IIP was 44.9%. Thus, the double-imprinting process for the preconcentration of Pb²⁺ proved to be a more adequate methodology than IIP with a single template. The optimised parameters of sample preparation were washing solvent (2.0 mL of tetrahydrofuran), type and volume of eluent (5 mL of 1 mol L^?1 hydrochloric acid), sample amount (30 mL of water spiked with 10.0 µg mL^?1), amount of IIP–SDS (400 mg) and sample pH (pH = 4.5). Linearity ranged from 10 to 125 µg L^?1 with r > 0.992. The limit of detection and quantification were 6.3 and 10 µg L^?1, respectively. The precision (relative standard deviation, %) and accuracy (relative error, %) were lower than 15%. Finally, IIP–SDS may be an alternative and effective adsorbent for SPE procedures in monitoring of wastewater samples.     

Correction to: Synthesis and characterization of a biopolymer of glycerol and macadamia oil

Journal of Thermal Analysis and Calorimetry - In the original publication of the article, the Figures 6, 7, and 8 are in disagreement with their figure captions. Moreover, in the result...     

Diagram,valence-to-core,and hypersatellite Kβ X-ray transitions in metallic chromium

We report on measurements of the Kβ diagram, valence-to-core (VtC), and hypersatellite X-ray spectra induced in metallic Cr by photon single and double K-shell ionization. The experiment was carried out at the Stanford Synchrotron Radiation Lightsource using the seven-crystal Johann-type hard X-ray spectrometer of the beamline 6-2. For the Kβ diagram and VtC transitions, the present study confirms the line shape features observed in previous works, whereas the K^hβ hypersatellite transition was found to exhibit a complex spectral line shape and a characteristic low-energy shoulder. The energy shift of the hypersatellite relative to the parent diagram line was deduced from the measurements and compared with the result of extensive multiconfiguration Dirac–Fock (MCDF) calculations. A very good agreement between experiment and theory was found. The MCDF calculations were also used to compute the theoretical line shape of the hypersatellite. A satisfactory agreement was obtained between the overall shapes of the experimental and theoretical spectra, but deviations were observed on the low- and high-energy flanks of the hypersatellite line. The discrepancies were explained by chemical effects, which were not considered in the MCDF calculations performed for isolated atoms.