Simultaneous determination of 11 drugs belonging to four different groups in human urine samples by reversed-phase high-performance liquid chromatography method

A new, accurate, sensitive and fast reversed-phase high-performance liquid chromatography (RP-HPLC) as an analytical method for the quantitative determination of 11 drugs in human urine was worked out, optimized and validated. The objects of analysis were imipenem (IMP), paracetamol (PAR), dipyrone (DPR), vancomycin (VCM), amikacin (AMK), fluconazole (FZ), cefazolin (CFZ), prednisolone (PRE), dexamethasone (DEX), furosemide (FUR) and ketoprofen (KET) belonging to four different groups (antibiotics, analgesic, demulcent and diuretic). For HPLC analysis, diode array (DAD) and fluorescence (FL) detectors were used. The separation of analyzed compounds was conducted by means of a LiChroCART^® Purospher^® C₁₈e (125 mm × 3 mm, particle size 5 μm) analytical column with LiChroCART^® LiChrospher^® C₁₈ (4 mm × 4 mm, particle size 5 μm) pre-column with gradient elution. Analyzed drugs were determined within 20 min. The mobile phase was comprised of various proportions of methanol, acetonitrile and 0.05% trifluoroacetic acid in water. AMK was separated and determined from human urine using ortho-phthaldialdehyde-3-mercaptopropionic acid (OPA-3-MPA) as a fluorescent reagent by RP-HPLC-FL. The following retention times for drugs IMP, PAR, DPR, VCM, AMK, FZ, CFZ, PRE, DEX, FUR and KET in human urine were found: 4.01 min, 4.86 min, 6.71 min, 8.14 min, 9.46 min, 10.01 min, 10.90 min, 13.34 min, 14.06 min, 16.03 min and 18.98 min, respectively. Excellent linearity was obtained for compounds in the range of concentration: 0.35-42 μg ml⁻¹, 0.5-45 μg ml⁻¹, 4.5-38 μg ml⁻¹, 0.25-25 μg ml⁻¹, 0.5-35 μg ml⁻¹, 0.25-22 μg ml⁻¹, 0.03-52 μg ml⁻¹, 0.15-25 μg ml⁻¹, 0.25-28 μg ml⁻¹, 0.05-18 μg ml⁻¹ and 0.15-35 μg ml⁻¹ for IMP, PAR, DPR, VCM, AMK, FZ, CFZ, PRE, DEX, FUR and KET, respectively. The limits of detection (LOD) and limits of quantification (LOQ) for analyzed drugs were calculated in all cases and recovery studies were also performed. Ten human urine samples obtained from patients treated in hospital have been tested. In analyzed samples, one or more drugs from the 11 examined drugs were detected. The concentrations of examined drugs in urine samples ranged between: 1.5-12 μg ml⁻¹ of PAR, 5.2-11.5 μg ml⁻¹ of DPR, 0.13-9.5 μg ml⁻¹ of CFZ and 0.1-8 μg ml⁻¹ of FUR. This method can be successfully applied to routine determination of all these drugs in human urine samples.     

Unimolecular photochemistry of 4-thiouracils

Unimolecular phototautomeric reactions in 4-thiouracil, 1-methyl-4-thiouracil and 6-aza-4-thiouracil were studied using the matrix-isolation technique combined with infrared absorption spectroscopy. For monomers of these compounds, isolated in solid argon at 10 K, an intramolecular proton-transfer photoreaction was observed. Upon UV (lambda > 345 nm) irradiation, the initial oxo-thione forms of 4-thiouracils were converted into the corresponding oxo-thiol tautomers. The photogenerated oxo-thiol isomers were identified by comparing their experimental IR spectra with the spectra theoretically calculated at the DFT(B3LYP)/6-311++G(2d,p) level. Good agreement between the observed and predicted pattern of spectral bands allowed a reliable identification. This is the first report on experimental observation of isomeric forms of 4-thiouracils other than the canonical oxo-thione tautomers.     

A pentanuclear bimetallic complex of manganese(II) and aluminium(III) ions: tetra‐μ2‐iodido‐iodidobis(μ3‐2‐methoxyethanolato)bis(μ2‐2‐methoxyethanolato)dimethyl(tetrahydrofuran‐κO)aluminium(III)tetramanganese(II)

The molecule of the title compound, [Mn₄Al(CH₃)₂(C₃H₇O₂)₄I₅(C₄H₈O)], contains one Al^III and four Mn^II ions. Two Mn atoms are five‐coordinate in the form of a trigonal bipyramid or a square pyramid. The two other Mn atoms are six‐coordinate with an octahedral geometry. The fourcoordinate Al atom is linked to the manganese core by μ‐O_alkoxo bridges, forming an almost planar five‐membered ring.     

On Raman optical activity sign-switching between the ground and excited states leading to an unusual resonance ROA induced chirality

Raman optical activity (ROA) spectra recorded for a chiral naphthalene diimide derivative (nBu-NDI–BINAM) dissolved in a series of solvents exhibit strong solute to solvent induced chirality with: (1) dominating bands of solvents, (2) nBu-NDI–BINAM resonance ROA (RROA) bands which are barely visible, (3) monosignate RROA Solvent spectra with an unexpected sign concordant with that of the ECD band of the resonant electronic state, (4) bisignate RROA bands for a few solvents, and (5) superposition of non-resonant and resonant ROA bands of the chiral solvents. The unusual ROA enhancement was explained in terms of resonance energy transfer with resonant Raman emission. The surprising RROA sign-switching was found to be due to specific conformational equilibria where one solute conformer dominates in the ground and the other in the first excited singlet state, and, the signs of the related ECD bands of these two conformers are opposite.

Unusual solute to solvent induced chirality in ROA comes from specific conformer equilibria in the ground and the excited states.     

New symmetry properties of a class of Hubbard models

In the Hubbard model for crystals of the AB-type all information on the system is already contained in the set of eigenstates where the number of sites equals the number of electrons or exceeds it by one. We prove this by deriving relations among the eigenstates with different numbers of particles which do not rely on the well-known transformation of electrons to holes. In this context a new good quantum number is identified. We report on results for the one-dimensional case.     

Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

Preparation and characterization of electrodeposited Ni-Ru alloys: morphological and catalytic study

Nickel-ruthenium alloys with various compositions have been deposited by electrodeposition for the first time. Cyclic voltammetry and linear stripping voltammetry measurements show that codeposition of nickel with ruthenium is possible below the potential value of nickel reduction. High-quality alloys containing nickel and ruthenium can be plated at cathodic potentials ranging from − 0.5 to − 1.0 V vs SCE. Deposited coatings were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The diffractograms obtained show that an increase of nickel concentration in alloy will lead to a change in the phase composition and formation of NiRu (100) and (101) phases which is observed to be 78 mas.% Ni. SEM studies confirm the surface homogeneity and presence of small, regular grains. AFM observation allows the estimation of the real surface area of obtained alloys which increase with more negative electrodeposition potentials. Ni-Ru alloys were found to be highly electroactive in the water splitting process, which can be connected with the presence of the NiRu phase and a well-developed electroactive area.

Electrochemical deposition of Ni-Ru alloys with various composition and their catalytic activity in water splitting process

     

Silver based mercury film electrode: Part IV. Comparison of theoretical and experimental voltammetric results obtained for cadmium

Using the silver based mercury film electrode (SBMFE) and cyclic and stripping voltammetric techniques the behaviour of cadmium has been compared with the behaviour of lead as well as with the predictions of the theory of de Vries and van Dalen. At the SBMFE with film thickness between 0.1 and 2 μm lead behaves with good agreement with theoretical predictions and only at thicknesses higher than 2 μm some deviations occur due to collecting of the excess mercury at the bottom of the wire electrode. On the other hand even at thin film electrodes the behaviour of cadmium deviates significantly from the predictions of the theory. The height of the anodic peak decreases and its width increases; also the displacement of the potentials of both cathodic and anodic peaks is smaller than the values predicted theoretically. The deviations are caused neither by the formation of intermetallic compounds in the bulk of mercury phase nor by the formation of heterogenous cadmium amalgam; they reflect the interaction between cadmium dissolved in mercury and the solid silver amalgam which is the substrate of the mercury film. Owing to the effect discussed the stripping determination of cadmium at SBMFE is characterized by a lower sensitivity and reproducibility.     

Dehydrogenation of ethylbenzene with nitrous oxide in the presence of mesoporous silica materials modified with transition metal oxides

The novel mesoporous templated silicas (MCM-48, SBA-15, MCF, and MSU) were used as supports for transition metal (Cu, Cr, or Fe) oxides. The catalysts were synthesized using the incipient wetness impregnation, and characterized by low-temperature N2 sorption, DRIFT, photoacoustic IR spectroscopy, UV-vis diffuse reflectance spectroscopy, and temperature-programmed desorption of ammonia. It was shown that the preparation method used results in different distributions and dimensions of the transition metal oxide clusters on the inert support surface. The prepared catalysts were tested in the reaction of oxidative dehydrogenation of ethylbenzene in the presence of nitrous oxide. The iron-containing catalysts showed the highest catalytic activity. The presence of isolated Fe3+ was found to be the most important factor influencing the ethylbenzene conversion. The undesirable effect of the increase in selectivity toward CO2 was observed for the samples with the highest concentrations of acidic surface sites.