Sugar-derived cyclic imines: one-pot synthesis and direct functionalization

A simple method for the synthesis of sugar-derived imines by a Schwartz's reagent reduction of easily available sugar lactams has been described. A direct addition of nucleophiles to the generated in situ cyclic imines and subsequent deprotection of hydroxyl function allows to convert sugar lactams in polyhydroxylated pyrrolidines and piperidines.     

Synthesis and structure–activity relationship study of cytotoxic lupane-type 3β-O-monodesmosidic saponins with an extended C-28 side chain

A concise synthesis of lupane triterpenes with an elongated carbon chain at the C-28 position, as well as saponins containing d-mannose, l-arabinose, and l-rhamnose moieties at the C-3 position is described. The overall synthesis of the new triterpenes involved seven linear steps starting from natural betulin: selective protection of a hydroxyl group, oxidation, elongation of the carbon chain by Grignard reaction, and deoxygenation. O-Glycosides were obtained by glycosylation of triterpenes with classical Schmidt's donors. Additionally, all new compounds were evaluated in vitro for their cytotoxic activities. Several triterpenes and the corresponding saponins exhibited an interesting cytotoxic activity profile against human cancer cell lines. The therapeutical index of active triterpenes is very high, since almost none of them were cytotoxic for normal BJ fibroblasts. These results open the way to the synthesis of various lupane-type saponin derivatives as potentially bioactive compounds.     

Promoted ternary CuO-ZrO2-Al2O3 catalysts for methanol synthesis

Ternary CuO-ZrO₂-Al₂O₃ catalysts promoted by palladium or gold were prepared and tested in CO hydrogenation reaction at 260°C under elevated pressure (4.8 MPa). The promotion effect of palladium or gold addition on the physicochemical and catalytical properties of CuO-ZrO₂-Al₂O₃ catalysts in methanol synthesis (MS) was studied. The catalysts were characterized by BET, XRD, TPR-H₂, TPD-NH₃ methods. The BET results showed that the ternary system CuO-ZrO₂-Al₂O₃ had the largest specific surface area, cumulative pore volume and average pore size in comparison with the promoted catalysts. The yield of methanol can be given through the following sequence: 5%Pd/CuO-ZrO₂-Al₂O₃ > CuO-ZrO₂-Al₂O₃ > 2%Au/CuO-ZrO₂-Al₂O₃. We also found that the presence of gold or palladium on catalyst surface has strong influence on the reaction selectivity. The high selectivity of gold doped ternary catalyst is explained by the gold-oxide interface sites created on the catalyst surface and the acidity of those systems. The higher selectivity to methanol in the case of the palladium catalyst is explained by the spillover effect between Pd and CuO.      

Biosorption of toxic metals using freely suspended Microcystis aeruginosa biomass

This paper describes the potential application of a freely suspended cyanobacterial biomass of Microcystis aeruginosa as a sorption material for toxic metals, cadmium (Cd) and lead (Pb) from aqueous solutions. In order to identify the most suitable conditions for removal of these elements (concentration range: 1–20 mg L^?1), the laboratory experiments were carried out during different incubation times (1–48 h) and under various temperatures (10–40°C), pH (5–9) and with or without light irradiance. Competitive biosorption of Cd and Pb was also investigated. We found that M. aeruginosa demonstrates high efficiency in removing both of the studied metals from aqueous solutions. Sorption of Pb occurred, however, more rapidly and effectively, and was less disturbed by changes in physico-chemical conditions. Under pH=7, 25°C and light, the removal rates after 3 h and 6 h of incubation, were 90–100% for Pb and 79.5–100% for Cd, respectively. The co-occurrence of the metals decreased the rate of metal biosorption. Pb was sequestered preferentially over Cd. From the results we conclude that freely suspended M. aeruginosa can constitute a promising low-cost, easy-producible biosorbent material for toxic metals in contaminated wastewater.      

Synthesis of Some Aminophosphonates Bearing N‐(Fluorophenyl)‐piperazynyl Moiety and Their Activity toward Serotonin Receptors

Syntheses of a series of compounds bearing a 1‐(fluorophenyl)piperazin‐4‐ylmethyl moiety, namely dialkyl 1‐(fluorophenyl)piperazin‐4‐ylmethyl phosphonates 3a–f , diethyl 2‐[1‐(fluorophenyl)piperazin‐4‐yl]‐ethyl phosphonates 4a,b , diethyl 3‐[1‐(4‐fluorophenyl)‐piperazin‐4‐yl]‐propyl phosphonate 5 , and di[1‐(fluorophenyl)piperazin‐4‐yl]methanes 6a,b were performed, and some of them were screened for their affinity for serotonin 5‐HT_1A, 5‐HT₆, and 5‐HT₇ receptors. Moderate interactions with these receptors were demonstrated.     

Amorphous alloys and differential scanning calorimetry (DSC)

Journal of Thermal Analysis and Calorimetry - A remarkable number of scientific papers are available in the literature about the bulk amorphous alloys and metallic glasses. Today, DSC is an...     

Modeling of the Simultaneous Hydrogen Evolution and Cobalt Electrodeposition

A mathematical model of simultaneous cobalt deposition and hydrogen evolution was developed and applied to the electroreduction process of 5 mM Co²⁺ ions investigated by cyclic voltammetry (CV) technique at different hydrogen ion concentrations (pH=2, 3, 4). The kinetic parameters of such a complex process were determined, and the validity of the model and its sensitivity to changes in individual parameters were verified. The relative value of the approximate standard deviation (ASD_%) was used to determine the degree of fit of the model to the experimental data. The catalytic effect of cobalt on the hydrogen evolution process was comprehensively confirmed.     

Crystallographic characterization of three cathinone hydrochlorides new on the NPS market: 1-(4-methylphenyl)-2-(pyrrolidin-1-yl)hexan-1-one (4-MPHP), 4-methyl-1-phenyl-2-(pyrrolidin-1-yl)pentan-1-one (α-PiHP) and 2-(methylamino)-1-(4-methylphenyl)pentan-1-one (4-MPD)

Cathinones belong to a group of compounds of great interest in the new psychoactive substances (NPS) market. Constant changes to the chemical structure made by the producers of these compounds require a quick reaction from analytical laboratories in ascertaining their characteristics. In this article, three cathinone derivatives were characterized by X-ray crystallography. The investigated compounds were confirmed as: 1-[1-(4-methylphenyl)-1-oxohexan-2-yl]pyrrolidin-1-ium chloride ( 1 , C₁₇H₂₆NO⁺·Cl^?, the hydrochloride of 4-MPHP), 1-(4-methyl-1-oxo-1-phenylpentan-2-yl)pyrrolidin-1-ium chloride ( 2 ; C₁₆H₂₄NO⁺·Cl^?, the hydrochloride of α-PiHP) and methyl[1-(4-methylphenyl)-1-oxopentan-2-yl]azanium chloride ( 3 ; C₁₃H₂₀NO⁺·Cl^?, the hydrochloride of 4-MPD). All the salts crystallize in a monoclinic space group: 1 and 2 in P2₁/c, and 3 in P2₁/n. To the best of our knowledge, this study provides the first detailed and comprehensive crystallographic data on salts 1 – 3 .     

New Insight on Carbon Dioxide-Mediated Hydrogen Production**

A new approach to hydrogen production from water is described. This simple method is based on carbon dioxide-mediated water decomposition under UV radiation. The water contained dissolved sodium hydroxide, and the solution was saturated with gaseous carbon dioxide. During saturation, the pH decreased from about 11.5 to 7–8. The formed bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing the recombination of hydroxyl and hydrogen radicals and prioritizing hydrogen gas formation. In the presented method, not yet reported in the literature, hydrogen production is combined with carbon dioxide. For the best system with alkaline water (0.2 m NaOH) saturated with CO₂ under UV-C, the hydrogen production amounted to 0.6 μmol h⁻¹ during 24 h of radiation.     

Astaxanthin for the Food Industry

Xanthophyll astaxanthin, which is commonly used in aquaculture, is one of the most expensive and important industrial pigments. It is responsible for the pink and red color of salmonid meat and shrimp. Due to having the strongest anti-oxidative properties among carotenoids and other health benefits, natural astaxanthin is used in nutraceuticals and cosmetics, and in some countries, occasionally, to fortify foods and beverages. Its use in food technology is limited due to the unknown effects of long-term consumption of synthetic astaxanthin on human health as well as few sources and the high cost of natural astaxanthin. The article characterizes the structure, health-promoting properties, commercial sources and industrial use of astaxanthin. It presents the possibilities and limitations of the use of astaxanthin in food technology, considering its costs and food safety. It also presents the possibilities of stabilizing astaxanthin and improving its bioavailability by means of micro- and nanoencapsulation.