Quenching of Singlet Oxygen by Pyocyanin and Related Phenazines†

Pseudomonas aeruginosa is a human pathogen, which causes infections of various organs, including lung, skin and eye, particularly in individuals who are immunocompromised. Pyocyanin (1-hydroxy-5-methylphenazine), a cytotoxic pigment secreted by the bacterium, is among the factors that contribute to virulence of this pathogen. We have previously shown that rose bengal and riboflavin photosensitize oxidation of pyocyanin to a product(s) with diminished reactivity and toxicity. Singlet oxygen was suggested as the major oxidant, based on the inhibitory effect of sodium azide. In the present study, we used the time resolved technique to investigate direct interaction of pyocyanin and related phenazines (1-hydroxyphenazine [1-OH-Phen], 1-methoxy-5-methylphenazine [1-MeO-PCN] and phenazine methosulfate [PMS]) with ¹O₂. The rate constants for the ¹O₂ quenching (physical + chemical) by pyocyanin and 1-OH-Phen in D₂O buffer (pD ∼7.2) have been determined to be 4.8 × 10⁸ and 6.8 × 10⁸ M⁻¹ s⁻¹, respectively. 1-MeO-PCN and PMS were markedly less efficient ¹O₂ quenchers. Among the phenazines studied only phenazine methosulfate photogenerated ¹O₂ (Φ(¹O₂) = 0.56 in acetonitrile). Interaction of ¹O₂ with pyocyanin and other related phenazines produced by the bacteria may be important in determining the potential utility of photochemical/pharmacological approaches to eradicate P. aeruginosa from infected tissues.     

Synthesis and characterisation of coating polyurethane cationomers containing fluorine built-in hard urethane segments

Polyurethane cationomers were synthesised in the reaction of 4,4’-methylenebis(phenyl isocyanate) with polyoxyethylene glycol (M?= 2,000) or poly(tetrafluoroethyleneoxide-co-difluoromethylene oxide) α,ω-diisocyanate and N-methyl diethanolamine. Amine segments were built-in to the urethane-isocyanate prepolymer in the reaction with 1-bromobutane or formic acid, and then they were converted to alkylammonium cations. The obtained isocyanate prepolymers were then extended in the aqueous medium that yielded stable aqueous dispersions which were applied on the surfaces of test poly(tetrafluoroethylene) plates. After evaporation of water, the dispersions formed thin polymer coatings. ¹H, ¹³C NMR and IR spectral methods were employed to confirm chemical structures of synthesised cationomers. Based on ¹H NMR and IR spectra, the factors κ and α were calculated, which represented the polarity level of the obtained cationomers. The DSC, wide angle X-ray scattering and atom force microscopy methods were employed for the microstructural assessment of the obtained materials. Changes were discussed in the surface free energy and its components, as calculated independently according to the method suggested by van Oss–Good, in relation to chemical and physical structures of cationomers as well as morphology of coating surfaces obtained from those cationomers. Fluorine incorporated into cationomers (about 30%) contributed to lower surface free energy values, down to about 15 mJ/m². That was caused by gradual weakening of long-range interactions within which the highest share is taken by dispersion interactions.     

Determination of catechin and epicatechin in the peel of apple varieties resistant and non-resistant to apple scab

Catechin and epicatechin were analysed in the peel of six apple cultivars (three resistant and three non-resistant to apple scab). Two methods of analytical sample preparation following extraction were tested: solid phase extraction and column separation with Sephadex LH-20 coupled to a differential refractometric detector. Prior to GC and GC-MS analyses, these compounds were silylized. This permitted co-injection with standards and the comparison of retention values and mass spectra with those recorded for standards. The content of catechin and epicatechin in apple peel is discussed in relation to the resistance of apple trees to scab.     

Leptons, Quarks, and Their Antiparticles: A?Phase-Space View

Recently, a correspondence has been shown to exist between the structure of a single Standard Model generation of elementary particles and the properties of the Clifford algebra of nonrelativistic phase space. Here, this correspondence is spelled out in terms of phase-space variables. Thus, a phase-space interpretation of the connections between leptons, quarks and their antiparticles is proposed, in particular providing a timeless alternative to the standard Stückelberg-Feynman interpretation. The issue of the additivity of canonical momenta is raised and argued to be intimately related to the unobservability of free quarks and the emergence of mesons and baryons.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.     

Chemoenzymatic synthesis of phosphocarnitine enantiomers

Racemic phosphocarnitine 3 has been synthesized starting from diethyl 3-chloro-2-oxopropanephosphonate 4 in three steps involving reduction of 4 to the corresponding 2-hydroxyphosphonate 5, conversion of the latter to phosphonic acid 6, and final reaction with trimethylamine, affording the trimethylammonium salt of 3. Baker's yeast reduction of 4 and enzymatic kinetic resolution of (+/-)-5 afforded the enantiomerically pure precursors of phosphocarnitine, (R)-(+)-5 and (S)-(-)-5, which were converted to (S)-(-)- and (R)-(+)-phosphocarnitine 3, respectively.     

Supplementation with Magnesium Salts—A Strategy to Increase Nutraceutical Value of Pleurotus djamor Fruiting Bodies

The use of substrates supplemented with minerals is a promising strategy for increasing the nutraceutical value of Pleurotus spp. The current research was performed to analyze the effect of substrate supplementation with magnesium (Mg) salts on the Mg content, biomass, and chemical composition of pink oyster mushroom (Pleurotus djamor) fruiting bodies. Before inoculation, substrate was supplemented with MgCl₂ × 6 H₂O and MgSO₄, both salts were applied at three concentrations: 210, 420, and 4200 mg of Mg per 2 kg of substrate. The harvest period included three flushes. Substrate supplementation with 4200 mg of Mg caused the most significant decrease in mushroom productivity, of about 28% for both Mg salts. The dry matter content in fruiting bodies was significantly lower in the treatment in which 210 mg of Mg was applied as MgSO₄ in comparison to the control. Supplementation effectively increased the Mg content in fruiting bodies of P. djamor by 19–85% depending on the treatment, and significantly affected the level of remaining bioelements and anions. One hundred grams of pink oyster fruiting bodies, supplemented with Mg salts, provides more than 20% of the Mg dietary value recommended by the Food and Drug Administration (FDA); thus, supplementation can be an effective technique for producing mushrooms that are rich in dietary Mg. Although P. djamor grown in supplemented substrate showed lower productivity, this was evident only in the fresh weight because the differences in dry weight were negligible. Mg supplementation increased the antioxidant activity of the fruiting bodies, phenolic compounds, and some amino acids, including L-tryptophan, and vitamins (thiamine and l-ascorbic acid).     

Gas-Phase Fragmentation of Oligoproline Peptide Ions Lacking Easily Mobilizable Protons

The fragmentation of peptides containing quaternary ammonium group, but lacking easily mobilizable protons, was examined with the aid of deuterium-labeled analogs and quantum-chemical modeling. The fragmentation of oligoproline containing quaternary ammonium group involves the mobilization of hydrogens localized at α- and γ- or δ-carbon atoms in the pyrrolidine ring of proline. The study of the dissociation pattern highlights the unusual proline residue behavior during MS/MS experiments of peptides.      

A study on adsorption of metals by activated carbon in a large-scale (municipal) process of surface water purification

Elements that enter the aquatic environment may pose a health risk to wildlife and humans. The aims of this study were: to determine how the introduction of activated carbon for a water purification system will improve the quality of the water produced; and to investigate the sorption of metals on activated carbons, including determination of the accumulation, as well as changes in concentrations of elements in carbons. The tests were carried out on three types of activated carbons with different granular structure. All samples were collected from Water Treatment Plant Goczalkowice, Poland. Concentrations of elements were measured using an optical emission spectrometer with inductively coupled plasma. The experiment showed that metals accumulating in the activated carbons during the operation included: Ca, Mn, Zn, and Cu. In each of the three types of carbons, it can distinguish such elements as Ba, Al, Cr, Ni, Ti, which are characterized by irregular accumulation during the operation of the filter. The introduction of carbon sorbent for water treatment largely contributed to improvement in the quality of raw material supplied to customers, mainly with regard to taste and smell, as well as to reduction of basic parameters: color, absorbance in the UV range and oxidability.