Synthesis of conjugated polyrotaxanes

A series of conjugated polyrotaxane insulated molecular wires are synthesised by aqueous Suzuki polymerisation, using hydrophobic binding to promote threading of the cyclodextrin units. These polyrotaxanes have conjugated polymer cores based on poly(para-phenylene), polyfluorene, and poly(diphenylene-vinylene), threaded through 0.9-1.6 cyclodextrins per repeat unit. Bulky naphthalene-3,6-disulfonate endgroups prevent the macrocycles from slipping off the conjugated polymer chains. Dialysis experiments show that the cyclodextrins become unthreaded only if smaller stoppers are used. MALDI TOF mass spectra detect oligomers with up to ten threaded cyclodextrins, and reveal the presence of some defects that result for oxidative homo-coupling of boronic acids. Weight-average molecular weights were determined by analytical ultracentrifugation, demonstrating that step-growth polymerisation is efficient enough to achieve degrees of polymerisation up to approximately 20 repeat units (84 para-phenylenes). The fluorescence spectra of these polyrotaxanes indicate that the presence of the threaded cyclodextrin macrocycles reduces the flexibility of the conjugated polymer pi-systems. Both the solution and the solid-state photoluminescence quantum yields are enhanced upon threading of the conjugated polyaromatic cores through alpha- or beta-cyclodextrins, and the emission spectra of the polyrotaxanes are blue-shifted compared to the corresponding unthreaded polymers. The greater weight of the 0-0 transition in the emission spectra, as well as the smaller Stokes shift, indicate that the polyrotaxanes are more rigid than the unthreaded polymers.     

Solidification of metallic tin in dispersed phase

Differential scanning calorimetry (DSC) and particle size measurements were carried out on disproportionation products of pure SnO to investigate the fusion and solidification behaviour of Sn droplets and their catalytic nucleation on Sn oxides. If disproportionation reaction takes place at T ≥ 798 K, the products are metallic Sn and SnO₂; but for 523 < T < 798 K, SnO₂ is replaced by an intermediate oxide (IO) Sn_xO_(1+x). On melting, samples with IO show a drop of melting point of metallic tin due to Gibbs–Thomson effect; no lowering of melting point was observed in samples with SnO₂. On the other hand, if solidification occurs in the presence of IO, Tin droplets always displayed three distinct exothermic solidification peaks, but if it takes place in the presence of SnO₂, only one exothermic peak is observed. Undercooling values and contact angles were determined for each of the heterogeneous nucleation processes. The different behaviour of metallic Tin droplets was related to the different lattice symmetry of SnO₂ and IO, which act as nucleation catalysts.     

Transition metal-catalysed organic reactions promoted by chelating or metallacycle-forming substrates

Chelating or metallacycle-forming substrates are very useful for directing organometallic reactions. This review covers the more recent research that has been carried out in the authors' laboratory. Rhodium(I)- and (III)-catalysed reactions of C---C coupling of butadiene with N-allylamides or N-alkylbutenamides are described. These reactions are controlled by the size and strength of the chelate ring formed by double-bond insertion into the crotyl-rhodium bond (formed from butadiene) and their regioselectivity can change with the oxidation state of the metal. Rhodium(I)-catalysed reactions of butadiene with enamides are also chelation controlled and lead to different products, depending on the substituents at nitrogen. Cobalt(II) metallacycles have been utilized for promoting some organic reactions. It has been shown that alkenes can be catalytically incorporated into cobaltacyclopentadiene rings, that spirocycles can be obtained from diynes, carbon monoxide and acrylic esters and that a Pauson-Khand-type reaction can be combined with a Michael-type reaction to prepare catalytically new cyclopentenones. The use of palladacycles, derived from norbornene insertion into aryl-palladium bonds, followed by cyclization, has allowed the selective functionalization of either end of the metallacycle and the formation of condensed rings. Conversion of a palladium(II) into a palladium(IV) metallacycle, and catalytic processes involving these intermediates, have been achieved. The formation of alkylaromatic palladacycles has also been exploited for the selective meta functionalization of the aromatic moiety by means of alkyl groups, accompanied by expulsion of the norbornene molecule.     

New Cisplatin Analogues—On the Way to Better Antitumor Agents

The clinical success of cisplatin (cis -diamminedichloroplatinum(II )) in antitumor chemotherapy has encouraged an all-out search for analogues with lower toxicity, improved therapeutic index and increased activity. Literally thousands of analogues, obtained by replacement of the ammine- and chloro-ligands by other amines and anionic ligands, respectively, have been systematically screened for activity in experimental tumor models. Some of these analogues have been selected for clinical evaluation, but only very few of them appear to be promising antitumor agents. More recently, cisplatin analogues have been designed and synthesized on the basis of, inter alia, the following considerations: 1) platinum complexes with carrier molecules as ligands should prove useful for achieving increasing drug concentration in tumor tissues; 2) platinum complexes with chemotherapeutic agents as ligands could afford polyfunctional drugs with synergistic action; 3) complexes containing more than one platinum atom might be more effective than complexes containing only one platinum atom; 4) platinum complexes could be used as sensitizers in radiation therapy. In this paper, we shall give a brief account of the “traditional” analogues, and then critically discuss what we believe could be the new trends in the design of cisplatin analogues.     

Novel cinchona alkaloid carbamate C9-dimers as chiral anion-exchange type selectors for high-performance liquid chromatography

Nine new quinine (QN) carbamate C9-dimers (QN-X-QN), with different aliphatic and cyclic spacers (X), have been synthesized and immobilized onto porous silica gel for HPLC. The chiral discriminating behavior of these "dimeric" anion-exchange type chiral stationary phases (CSPs) has been investigated in detail, to elucidate the role of the presence of a second QN subunit on the chiral selector (SO), as well as the influence of the structure and length of the spacer, on the overall chiral recognition of a set of N-derivatized amino acids and other acidic drugs. The bulkiness of the intermediate spacer tuned the chiral recognition abilities of these SOs, with the 1,3-adamantylen-derived CSP being the one that led to the best separations. Shorter spacers reduced the chiral discrimination abilities of the "dimeric" selectors, with the n-hexylen bridge being the most favorable distance to allow a nearly independent interaction of the two QN subunits with the racemic analytes. The comparison to five "monomeric" CSPs showed that the "dimeric" ones usually retain the chiral analytes more strongly, though the enantioseparation is not improved. Nevertheless, the exceptional resolution abilities of dimeric SOs with a trans- 1,2-diaminocyclohexylen-bridge for the separation of DNP-derivatives of amino acids and certain acidic drugs of therapeutical interest (e.g., profens) seemed to be superior to most of the other CSPs.     

Thermal decomposition of some imidazole and N-methyl substituted imidazole complexes of palladium(II)

We describe in this paper the thermal decomposition in air of several complexes of palladium(II) chloride with imidazole and N-methylimidazole. Although the final process of the decomposition gives (PdCl₂)_n which then decomposes to pa ladium which oxidizes to PdO, there are interesting differences in the initial decomposition path. The reasons for these differences appear to be related to the trans-effect and to the presence in the imidazole complexes of hydrogen bonds which break down at temperatures of around 220.

---

Zusammenfassung In diesem Beitrag wird die thermische Zersetzung verschiedener Komplexe des Palladium(II)chlorids mit Imidazol und N-Methylimidazol in Luft beschrieben. Obwohl der Endvorgang der Zersetzung (PdCl₂)_n ergibt, welches dann zu Palladium zersetzt und zu PdO oxidiert wird, bestehen interessante Unterschiede im Anfangsschritt der Zersetzung. Die Ursachen dieser Unterschiede scheinen mit dem Trans-Effekt und der Anwesenheit von Wasserstoffbindungen in den Imidazolkomplexen verbunden zu sein, welche bei Temperaturen um 220 zerstört werden.

---

Résumé La décomposition thermique dans l'air de plusieurs complexes du chlorure de palladium(II) avec l'imidazole et le méthyl-4-imidazole est décrite. Bien que l'étape finale de la décomposition donne (PdCl₂)_n qui se décompose ensuite en palladium qui s'oxyde en PdO, des différences intéressantes apparaissent dans les étapes initiales de la décomposition. Les causes de ces différences sont en rapport avec l'effet trans et la présence, dans les complexes avec l'imidazole, de liaisons hydrogÊne qui se rompent vers 220.

---

(II) -. (PdCl₂)_n, , PdO, . , - , 220.

---

---

One of us (M.C. Navarro Ranninger) would like to thank the D.G.E.S.I. for a grant that allowed her to work on this research.     

Selenium dioxide oxidation of tetrahydro-β-carboline derivatives

The oxidation of some tetrahydro-β-carboline derivatives with selenium dioxide led to the formation of 1,4-dihydro or fully aromatic β-carbolines, depending on the nature and the number of substituents at 1 position. The oxidation of 2-acetyl derivatives followed a different course and the products originated by the attack at C-1 of the ring C of the tetrahydro-β-carboline were obtained.     

Carbocyclic analogues of nucleosides from bis-(Hydroxymethyl)-cyclopentane: synthesis,antiviral and cytostatic activities of adenosine,inosine and uridine analogues

Six new carbocyclic nucleosides were prepared by constructing a purine base (in compounds 9-11) or pyrimidine base (in 6-8) on the amino groups of (+/-)-(1 beta,2 alpha,4 beta)-4-amino-1,2-cyclopentanedimethanol (4) and (+/-)-(1 beta,3 alpha,4 beta)-4-amino-1,3-cyclopentanedimethanol (5), and their activities against a variety of viruses and tumour cell lines were determined.     

Detection of a stable nitroxide during chemical depolymerization of heparin

The use of low-molecular-weight heparins (LMWHs) has become common, since compared to unfractionated heparin (UFH), they have a much longer plasma half-life and lower incidence of side effects. LMWHs are derived from the depolymerization of UFH, obtained either chemically, physically or enzymatically. We employed electron spin resonance (ESR) spectroscopy to study the depolymerization of UFH by copper in the presence of hydrogen peroxide. A stable nitroxide radical was detected. This could be generated by the hydroxyl radical attack either to the N-SO⁻₃ group or to free amino groups present in the UFH preparation.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.