Evolution of first-order sidebands from multiple FWM processes in HiBi optical fibers

The generation of two idler waves inside a high birefringent (HiBi) optical fiber through three four-wave mixing (FWM) processes is studied theoretically. The coupled-equations for the field amplitudes are derived and analytically solved, in the co-polarized and orthogonal polarization schemes. The obtained solutions take into account the delayed Raman response of the medium. The polarization sensitivity of the generation of the idler waves is analyzed. Results show that the stimulated Raman scattering does not change the efficiency of the idler wave generation in the co-polarized scheme, whereas in the orthogonal polarization scheme that nonlinear process decreases the efficiency of the four-wave mixing processes. Results also show that this set of multiple four-wave mixing processes is physically quite different from the typical single or dual pump four-wave mixing configurations. Findings show that the power transfer from the pumps to the idler fields can lead to a monotonous growth, or a periodic evolution of the sidebands along the fiber. Results show that the process efficiency varies greatly with the angle between the two pump polarizations.     

Realization of 2D convolutional codes of rate \frac{1}{n} by separable Roesser models

In this paper, two-dimensional convolutional codes constituted by sequences in $(\mathbb F ^n)^{\mathbb{Z }^{2}}$ where $\mathbb F $ is a finite field, are considered. In particular, we restrict to codes with rate $\frac{1}{n}$ and we investigate the problem of minimal dimension for realizations of such codes by separable Roesser models. The encoders which allow to obtain such minimal realizations, called R-minimal encoders, are characterized.     

Magneto-transport properties of La0.7Ca0.3MnO3/SrTiO3/La0.7Ce0.3MnO3 tunnel junction

Hole-doped rare-earth manganite La_0.7Ca_0.3MnO₃ and the electron-doped manganite La_0.7Ce_0.3MnO₃ both show a metal-insulator transition around 250 K associated with a ferromagnetic transition and colossal magnetoresistance. In an earlier publication we have reported the rectifying characteristic of La_0.7Ca_0.3MnO₃/SrTiO₃/La_0.7Ce_0.3MnO₃ tunnel junction at room temperature, showing that it is possible to fabricate a diode out of the polaronic insulator regime of doped manganites. Here we report the magneto-transport properties of such a tunnel junction above and below the metal-insulator transition. We show, from the large positive magnetoresistance of the tunnel junction at low temperature, that La_0.7Ce_0.3MnO₃ could be a minority spin carrier ferromagnet. The implication of this observation is discussed.     

Self-injection length in La0.7Ca0.3MnO3-YBa2Cu3O7-δ ferromagnet-superconductor multilayer thin films

We have carried out extensive studies on the self-injection problem in barrierless heterojunctions between La_0.7Ca_0.3MnO₃ (LCMO) and YBa₂Cu₃O_7-δ (YBCO) thin films. The heterojunctions were formed in situ by sequentially growing LCMO and YBCO films on 〈100〉 LaAlO₃ (LAO) substrate using a pulsed laser deposition (PLD) system. YBCO micro-bridges with 64 μm width were patterned both on the LAO (control) and LCMO side of the substrate. Critical current, I _c, was measured at 77 K on both the control side as well as the LCMO side for different YBCO film thickness. It was observed that while the control side showed a J _c of ∼ 2 × 10⁶ A/cm², the LCMO side showed about half the value for the same thickness (1800 ?). The difference in J _c indicates that a certain thickness of YBCO has become ‘effectively’ normal due to self-injection. From the measurement of J _c at two different thicknesses (1800 ? and 1500 ?) of YBCO films both on the LAO as well as the LCMO side, the value of self-injection length (at 77 K) was estimated to be ∼ 900 ?. To the authors’ best knowledge, this is the first time that self-injection length has been quantified. A control experiment carried out with LaNiO₃ deposited by PLD on YBCO did not show any evidence of self-injection.     

The valence state of M-ions in the chemically stabilized YSr2Cu3-xMxO7+δ (M=Mo, W and Re) superconductors

 Single phase Ba-free Sr-based YSr₂Cu _3-x M _x O_7+δ (M=Mo, W and Re) compounds have been stabilized by chemical doping. Superconductivity is observed for these phases in the range 30–45 K. X-ray diffraction studies suggest a relatively small orthorhombicity compared to Ba-analogue. X-ray photoelectron spectroscopic investigations reveal that the stabilizing cations are in the hexavalent state. The observation of the higher oxidation state of M-ions accounts for the excess oxygen content in these phases which is in accordence with the diffraction results. Received: 10 June 1996 / Accepted: 20 September 1996     

Growth and characteristics of reactive pulsed laser deposited molybdenum trioxide thin films

Molybdenum trioxide thin films were prepared by reactive pulsed laser deposition on Corning 7059 glass substrates. The influence of oxygen partial pressure and deposition temperature on the structure, surface morphology and optical properties of these films was studied to understand the growth mechanism of MoO₃ thin films. The films formed at 473 K in an oxygen partial pressure of 100 mTorr exhibited predominantly a (0k0) orientation, corresponding to an orthorhombic layered structure of α-MoO₃. The evaluated optical band gap of the films was 3.24 eV. The crystallite size increased with increase of deposition temperature. The films formed at an oxygen partial pressure of pO₂=100 mTorr and at a deposition temperature greater than 700 K exhibited both (0k0) and (0kl) orientations, representing α-β mixed phases of MoO₃. The films formed at an oxygen partial pressure less than 100 mTorr were found to be sub-stoichiometric with α-β mixed phases. The investigation revealed the growth of polycrystalline and single-phase orthorhombic-layered-structure α-MoO₃ thin films with composition nearly approaching the nominal stoichiometry at moderate substrate temperatures in an oxygen partial pressure of 100 mTorr. Received: 9 April 2001 / Accepted: 6 August 2001 / Published online: 17 October 2001     

Immobilization of Distinctly Capped CdTe Quantum Dots onto Porous Aminated Solid Supports

Immobilization of quantum dots (QDs) onto solid supports could improve their applicability in the development of sensing platforms and solid‐phase reactors by allowing the implementation of reusable surfaces and the execution of repetitive procedures. As the reactivity of QDs relies mostly on their surface chemistry, immobilization could also limit the disruption of solution stability that could prevent stable measurements. Herein, distinct strategies to immobilize QDs onto porous aminated supports, such as physical adsorption and the establishment of chemical linking, were evaluated. This work explores the influence of QD capping and size, concentration, pH, and contact time between the support and the QDs. Maximum QD retention was obtained for physical adsorption assays. Freundlich and Langmuir isotherms were used to analyze the equilibrium data. Gibbs free energy, enthalpy, and entropy were calculated and the stability of immobilized QDs was confirmed.