一种新的肉桂酸类化合物的脱羧/甲基化反应

近年来,脱羧反应得到了广泛而深入的研究.肉桂酸类化合物的脱羧串联反应也得到了较多的关注.这类反应一般包括两个过程,自由基加成和羧基的脱去,从而在苯环的侧链引入各种各样的官能团.我们在研究过程中发现,在碳酸钾作为碱,过氧叔丁醇作为氧化剂,以二甲基亚砜（DMSO）/水作为混合溶剂条件下（体积比为1：1）,肉桂酸类衍生物能够转化成苯丙酮类化合物.通过对反应机理的研究,产物中的甲基来自于过氧叔丁醇,反应经过自由基加成和进一步脱羧得到产物.该反应特点是没有用过渡金属盐作为催化剂,并且是在水相中反应,因此符合绿色化学的发展要求.     

Enhanced physical and chemical adsorption of carbon dioxide using bimetallic copper–magnesium oxide/carbon nanocomposite

Mixed Cu and Mg oxides on nitrogen-rich activated carbon (AC) from Nypha fruticans biomass were characterized and their CO₂ adsorption performance was measured. Highly dispersed CuO and MgO nanoparticles on AC was obtained using an ultrasonic-assisted impregnation method. The optimum adsorbent is 5%CuO–25%MgO/AC having good surface properties of high surface area, pores volume and low particles agglomeration. The higher content of MgO of 5%CuO–25%MgO/AC adsorbent contributes to less metal carbide formation which increases their porosity, surface area and surface basicity. XPS analysis showed some amount of nitrogen content on the surface of the adsorbent which increased their surface basicity towards selective CO₂ adsorption. The presence of moisture accelerated the CO₂ chemisorption to form a hydroxyl layer on the surfaces. The 5%CuO–25%MgO/AC adsorbent successfully adsorbed CO₂ via physisorption and chemisorption of 14.8 and 36.2 wt%, respectively. It was significantly higher than fresh AC with better selectivity to CO₂.     

Dinuclear Dy2 Single‐Molecule Magnets: Functional Modulation on the Bridging Ligand and Different Relaxation Performances within the Single‐Crystal to Single‐Crystal System

Crystal structures, single‐molecule magnetic behavior, and ab initio calculations of four new phenoxo‐bridged dinuclear dysprosium complexes and their gadolinium(III) analogues are explored. Complexes [Dy₂(DMOMP)₂(DBM)₄]₂ ? CHCl₃ ( 1 ; DMOMP=1‐methyl‐3,5‐dimethoxy‐4‐hydroxybenzene, DBM=1,3‐diphenylpropane‐1,3‐dione); [Dy₂(DMOAP)₂(DBM)₄]₂ ? CHCl₃ ( 2 ; DMOAP=syringaldehyde); Dy₂(DMOEP)₂(DBM)₄ ( 3 ; DMOEP=methyl syringate); and solvent‐free Dy₂(DMOMP)₂(DBM)₄ ( 4 ), which is obtained by the transformation of single crystal into single crystal from 1 , have nearly identical core structures and only differ in the substituents at the para position of the phenol moieties of the bridging ligand. In this system, the electronic effects are efficiently implemented to significantly modify the ligand field strength and exchange coupling by modulating the substituents on the phenol backbone. The effective energy barrier (U_eff) of magnetization reversal is improved significantly to fivefold magnitude, at most, and the hysteresis temperature up to 3.5 K by deliberately using the electron‐withdrawing substituent to replace the electron‐donating one. The origin of the two relaxation processes in 1 is mostly attributed to the existence of two molecules in one unit, which is illuminated by means of the transformation of single crystal into single crystal.     

On the Upper Limits of Oxidation States in Chemistry

The concept of oxidation state ( OS ) is based on the concept of Lewis electron pairs, in which the bonding electrons are assigned to the more electronegative element. This approach is useful for keeping track of the electrons, predicting chemical trends, and guiding syntheses. Experimental and quantum‐chemical results reveal a limit near +8 for the highest OS in stable neutral chemical substances under ambient conditions. OS =+9 was observed for the isolated [IrO₄]⁺ cation in vacuum. The prediction of OS =+10 for isolated [PtO₄]²⁺ cations is confirmed computationally for low temperatures only, but hasn't yet been experimentally verified. For high OS species, oxidation of the ligands, for example, of O^?2 with formation of ^.O^?1 and O?O bonds, and partial reduction of the metal center may be favorable, possibly leading to non‐Lewis type structures.     

Thermal analysis of sulfurization of polyacrylonitrile with elemental sulfur

Thermal analysis of sulfurization of polyacrylonitrile (PAN) with elemental sulfur was investigated by thermogravimetry and differential thermal analysis of the mixture of polyacrylonitrile and elemental sulfur up to 600°C. Due to the volatilization of sulfur, the different heating rate (10 and 20 K min⁻¹) and different mixture proportion of polyacrylonitrile and elemental sulfur were adopted to run the analysis. The different heating rates make the DSC curves of sulfur different, but make the DSC curves of PAN similar. In the DSC curve of sulfur for the heating rate of 20 K min⁻¹ around 400°C, a small exothermic peak occurs at 400°C in the wide endothermic peak around 380∼420°C, indicative of that there is an exothermic reaction around 400°C. In the DSC curves of the mixture, the peaks around 320°C are exothermic as the content of sulfur is below 3.5:1 and endothermic as the content of sulfur is over 4:1, indicating that one of the reactions between PAN and sulfur takes place around 320°C. In the TG curves of the mixture, the mass losses begin at 220°C, and sharply drop down from 280°C. The curves for the low sulfur content obviously show two steps of mass loss, and curves for the high sulfur content show only one step of mass loss, indicative of more sulfur is benefit for the complete sulfurization of PAN. This study demonstrates that the TG/DSC analysis can give the parameter for the sulfurization, even if the starting mixture contains the volatile sulfur.     

Cobalt-catalyzed hydrogen desorption from the LiNH2-LiBH4 system

A doping of 5 wt% CoCl2 considerably decreases the dehydrogenation temperature of a mixture of LiNH2 and LiBH4. More that 8 wt% of hydrogen can be released at ca. 155 degrees C. X-Ray absorption near edge structure (XANES) spectroscopy indicated the formation of metallic Co after ball milling CoCl2 with LiNH2 and LiBH4. Extended X-ray absorption fine structure (EXAFS) spectroscopy measurements revealed that Co particles have poor crystallinity and are finely dispersed in the sample, which could lead to a high catalytic efficiency.     

Clean synthesis of azo compounds using Magtrieve™ in the ionic liquid [<Emphasis Type="Italic">bmim</Emphasis>][Br]

A series of azo compounds, N-aryl-2-phenyldiazenecarboxamides, and 4-substituted-1,2,4-triazoline-3,5-diones, were synthesized using Magtrieve™, a magnetically retrievable and recyclable oxidant, in the ionic liquid [bmim][Br] under neutral condition. This procedure has several advantages, such as greenness, mild reactions, simple manipulation, and reusability of reagent and solvent. Correspondence: Yanqing Peng, Shanghai Key Laboratory of Chemical Biology, Institute of Pesticides and Pharmaceuticals, East China University of Science and Technology, Shanghai 200237, China.     

Analyses of gibberellins in coconut (Cocos nucifera L.) water by partial filling-micellar electrokinetic chromatography-mass spectrometry with reversal of electroosmotic flow

In this paper, we present the results of simultaneous screening of eight gibberellins (GAs) in coconut (Cocos nucifera L.) water by MEKC directly coupled to ESI-MS detection. During the development of MEKC-MS, partial filling (PF) was used to prevent the micelles from reaching the mass spectrometer as this is detrimental to the MS signal, and a cationic surfactant, cetyltrimethylammonium hydroxide, was added to the electrolyte to reverse the EOF. On the basis of the resolution of the neighboring peaks, different parameters (i.e., the pH and concentration of buffer, surfactant concentrations, length of the injected micellar plug, organic modifier, and applied separation voltage) were optimized to achieve a satisfactory PF-MEKC separation of eight GA standards. Under optimum conditions, a baseline separation of GA standards, including GA1, GA3, GA5, GA6, GA7, GA9, GA12, and GA13, was accomplished within 25 min. Satisfactory results were obtained in terms of precision (RSD of migration time below 0.9%), sensitivity (LODs in the range of 0.8-1.9 microM) and linearity (R2 between 0.981 and 0.997). MS/MS with multiple reaction monitoring (MRM) detection was carried out to obtain sufficient selectivity. PF-MEKC-MS/MS allowed the direct identification and confirmation of the GAs presented in coconut water (CW) sample after SPE, while, the quantitative analysis of GAs was performed by PF-MEKC-MS approach. GA1 and GA3 were successfully detected and quantified in CW. It is anticipated that the current PF-MEKC-MS method can be applicable to analyze GAs in a wide range of biological samples.     

An Arbitrarily Regulated Monomer Sequence in Multi-Block Copolymer Synthesis by Frustrated Lewis Pairs

Rapid access to sequence-controlled multi-block copolymers (multi-BCPs) remains as a challenging task in the polymer synthesis. Here we employ a Lewis pair (LP) composed of organophosphorus superbase and bulky organoaluminum to effectively copolymerize the mixture of methacrylate, cyclic acrylate, and two acrylates, into well-defined di-, tri-, tetra- and even a hepta-BCP in one-pot one-step manner. The combined livingness, dual-initiation and CSC feature of Lewis pair polymerization enable us to achieve not only a trihexaconta-BCP with the highest record in 8 steps by using four-component monomer mixture as building blocks, but also the arbitrarily-regulated monomer sequence in multi-BCP, simply by changing the composition and adding order of the monomer mixtures, thus demonstrating the powerful capability of our strategy in improving the efficiency and enriching the composition of multi-BCP synthesis.     

Understanding the reactivity of the tetrahedrally coordinated high-valence d0 transition metal oxides toward the C-H bond activation of alkanes: a cluster model study

We have carried out a theoretical study on the structure-function relationship for the selective oxidation of lower alkanes (C1-C4). The H abstraction mechanism has been examined over the model catalysts of high-valence d0 transition metal oxides in the tetrahedral coordination. The intrinsic connections among the H abstraction barrier, the strengths of the O-H and the M-O bonds, the ability of electron transfer, as well as the energy gap of frontier orbitals of the oxides have been rationalized in terms of thermodynamics cycles and the frontier orbital analysis. In particular, we emphasize the role that the O-H bond strength plays in determining the reactivity of a metal oxide.