Thermal stability and flame-retardancy mechanism of poly(ethylene terephthalate)/boehmite nanocomposites

The thermal stability and flame-retardancy properties of poly(ethylene terephthalate)/nano-boehmite composites (PET/AlOOH) were investigated using composites prepared in situ. Combustion behaviour and flammability were assessed using the limiting oxygen index (LOI) and cone calorimetry. The incorporation of nano-boehmite increased the LOI of PET from 18 to greater than 25. Cone calorimetry showed that the heat release rates and total smoke production values of PET/AlOOH composites were significantly less than those of pure PET. It also showed that PET/AlOOH combustion produced greater quantities of char residues than did PET combustion. These results showed that nano-boehmite is an effective flame-retardant for PET. Combustion residues were examined using scanning electron microscopy, indicating that nano-boehmite addition produced consistent, thick char crusts. Thermal stability and pyrolysis were investigated using thermogravimetric analysis and pyrolysis-gas chromatography-mass spectrometry, showing that thermal stability of PET/AlOOH was superior to that of pure PET, fewer cracking products were produced in nanocomposite combustion than in pure PET combustion, and pyrolysis of the flame-retardant polyester was incomplete. We propose a condensed phase mechanism for the PET/AlOOH flame-retardancy effect.     

Enantioselective separation of the carfentrazone‐ethyl enantiomers in soil,water and wheat by HPLC

A simple enantioselective HPLC method was developed for measuring carfentrazone‐ethyl enantiomers. The separation and determination was accomplished on an amylose tris[(S)‐α‐methylbenzylcarbamate] (Chiralpak AS) column using n‐hexane/ethanol (98:2, v/v) as mobile phase at a flow rate of 1.0 mL/min with UV detection at 248 nm. The effects of mobile‐phase composition and column temperature on the enantioseparation were discussed. The accuracy, precision, linearity, LODs, and LOQ of the method were also investigated. LOD was 0.001 mg/kg in water, 0.015 mg/kg in soil and wheat, with an LOQ of 0.0025 mg/kg in water and 0.05 mg/kg in soil and wheat for each enantiomer of carfentrazone‐ethyl. SPE was used for the enrichment and cleanup of soil, water, and wheat samples. Recoveries for two enantiomers were 88.4–106.7% with RSD_r of 4.2–9.8% at 0.1, 0.5, and 1 mg/kg levels from soil, 85.8–99.5% with the RSD_r of 4.4?9.6% at 0.005, 0.025, and 0.05 mg/kg levels from water, and from wheat the recoveries were 86.3?91.3% with RSD_r below 5.0% at 0.2, 0.5, and 1 mg/kg levels. This method could be used to identify and quantify the carfentrazone‐ethyl enantiomers in food and environment.     

中空Fe203/G-NS纳米复合材料的制备和储锂性能

以三氯化铁和氧化石墨烯(Graphite oxide,GO)为原料,采用水热法一步合成了中空Fe2O3/石墨烯(Graphene nanoslheet,GNS)纳米复合材料.研究结果表明,Fe2O3/GNS纳米复合材料的形成是由于Fe3+催化氧化GO中的羧基等官能团释放出CO2,并以原位形成的CO2气泡为模板形成了中空...     

碳纳米管在电化学和光化学纳米生物传感器中的应用

碳纳米管(CNTs)因具有独特的物理化学及电化学性质,如较大的比表面积、较强的电子转移能力和良好的吸附性能等而引起人们的广泛关注.碳纳米管可以通过物理吸附、静电或疏水作用等非共价结合方式或共价连接方式固定生物大分子(如蛋白质、DNA、抗体等),有效地促进生物大分子与电极间直接、快速的电子转移,可应用于多种电化学生物传感器中.碳纳米管本身在近红外光区具有独特的荧光和拉曼光谱,可以利用多种光谱手段对多种生物分子实现定量检测,因此近年来碳纳米管在光化学生物传感器中的应用也逐渐受到了研究者的重视.本文对碳纳米管在电化学和光化学生物传感器中的应用进行了简要综述和展望.     

氨基化镁铝类水滑石修饰电极及电化学杀菌

以层间插入十二烷基磺酸钠的镁铝类水滑石（Mg/Al-SDS-HTLc）,与十六烷基三甲基溴化铵（CTAB）和3-氨丙基三乙氧基硅烷（APS）缩合反应制备了氨基化镁铝类水滑石（Mg/Al-NH2-HTLc）。 然后以Mg/Al-NH2-HTLc修饰热解石墨电极,通过循环伏安法探讨了该电极对吸附在其表面的大肠杆菌的杀灭作用。 结果表明,被吸附的大肠杆菌在经过循环伏安扫描后死亡率达到98.68%,大肠杆菌的死亡可能是由于细胞膜中易氧化物质（如鸟嘌呤）被氧化所致。     

钙黄绿素-铜(Ⅱ)荧光体系测定痕量硫离子

在pH 8.0的KH2PO4-NaOH缓冲液中,Cu(Ⅱ)与钙黄绿素配位引起荧光猝灭。由于硫离子与Cu(Ⅱ)的亲和力很强,可从钙黄绿素-Cu(Ⅱ)的络合物中夺取Cu(Ⅱ)而使钙黄绿素游离出来,从而使体系的荧光得以恢复,并且荧光恢复的程度与加入硫离子的量在一定范围内呈线性。据此建立了一种测定硫离子的新方法,该方法的线性范...     

Ce-TiO_x超细粒子的模板法制备及结构研究

利用模板法结合真空干燥技术制备出Ce-TiOx超细粒子,用XRD,TG-DSC,TEM等手段进行表征;以甲基橙溶液的光催化降解测试Ce-TiOx超细粒子的催化活性;考察初始物质的量比及热处理温度对Ce-TiOx超细粒子的结构及光催化活性的影响。结果显示:钛干凝胶经400℃热处理可得结晶度较高的锐钛矿型TiO2,800℃时TiO2转变为金红石相;Ce-Ti干凝胶经800℃热处理可得粒径约为45 nm的类球形颗粒;Ce-TiOx超细粒子中,钛以Ti3O5,Ti6O11,TiO2等多种形式存在,铈以CeO2和Ce7O12的形式存在;稀土铈影响Ce-TiOx超细粒子中钛的价态。     

剪切历史对尼龙熔体结晶行为的影响

采用差示扫描量热法研究了原始聚酰胺材料在经历不同的预剪切过程或应用不同设备进行剪切后其结晶行为的变化,结果表明,原始样品经过预剪切后,结晶温度升高5～10℃,半结晶时间降低到原始样品的一半.当聚酰胺材料经历很低的剪切时其结晶温度就有很大的提高,进一步提高剪切强度,结晶温度的增加趋势变缓.偏光显微镜观察表明有剪切历史的样品,球晶尺寸减小.作为对此,聚烯烃和聚酯材料的结晶对剪切历史不敏感,剪切与非剪切样品的结晶行为基本相同,据此推测聚酰胺分子间氢键可能是这种剪切记忆效应产生的原因.     

壳聚糖及其衍生物在分析化学中的应用

介绍了壳聚糖及其衍生物在分离富集、色谱固定相、电化学分析和生物传感器等方面的应用研究进展,并展望了其在分析化学中的应用前景。     

Ce0.63Zr0.37MnxO2复合氧化物在CH4选择性催化还原NO反应中的研究

以Ce0.63Zr0.37MnxO2复合氧化物(OSM)为载体,Pt为活性组分,制备Pt质量百分含量为1%的催化剂。考察了OSM中Mn含量对CH4催化还原NO反应的性能,并利用XRD和H2-TPR对催化剂进行了表征。结果表明Pt/OSM催化剂在有氧条件下对CH4催化还原NO具有较好的催化活性,Mn含量为10%和15%的OSM制备的催化剂活性最好。XRD结果表明,Ce0.63Zr0.37MnxO2复合氧化物以固熔体形式存在,且Pt高度分散于载体上。H2-TPR结果表明,Pt/OSM2和Pt/OSM3催化剂具有较强的可还原性能,而Pt/OSM1和Pt/OSM4催化剂的可还原性能较弱。