一个非协调膜元的高精度分析

本文讨论一个四自由度三角形非协调膜元的整体超收敛性，外推和亏量校正。     

BAHADUR ASYMPTOTIC EFFICIENCY IN A SEMIPARAMETRIC REGRESSION MODEL

ＢＡＨＡＤＵＲＡＳＹＭＰＴＯＴＩＣＥＦＦＩＣＩＥＮＣＹＩＮＡＳＥＭＩＰＡＲＡＭＥＴＲＩＣＲＥＧＲＥＳＳＩＯＮＭＯＤＥＬ￥ＬＩＡＮＧＨＵＡ；ＣＨＥＮＧＰＩＮＧＡｂｓｔｒａｃｔ：ＴｈｅａｕｔｈｏｒＳｇｉｖｅＭＬＥθ１ＭＬｏｆθ１ｉｎｔｈｅｍｏｄｅｌＹ＝θ...     

陆地棉体细胞胚胎的发生和遗传转化条件初探

以陆地棉（冀棉20）下胚轴为外植体，在含KT0．3mg／L和2，4－D0．08mg／L的MS培养基上，诱导产生了胚性愈伤组织，继代培养不需要添加激素，胚性愈伤组织即分化为胚状体，并萌发出小芽，胚状体萌发过程与合子胚相似，但出现了一些畸形胚，解剖学方法观察发现，这些畸形胚的维管束系统不明显或形态异常，以农杆菌介导法对冀棉20胚状体及胚性愈伤组织进行了雪花莲凝集素（GNA）基因的遗传转化条件探索，并以GUS基域瞬间进行检测加以证实，得出农杆菌的浓度为O．D600＝0．8时，浸染时间为5min，共培养时间为3d，筛选培养基中卡那霉素浓度为75mg／L，对冀棉20胚状体及胚性愈伤组织转化是较为适合的。     

超软X射线流气式正比计数管

介绍了一种用于测量183～933eV超软X射线的圆柱形、侧窗式、流气式正比计数管,工作气体是0.11MPa的P-10气体或氦气-丙烷混合气体。计数管内径为φ25mm,直径为φ0.3mm的入射窗是由厚度80～90μgcm~2聚乙烯甲醛制成的。该计数管的特点:(1)薄窗,对软X射线透过率高。(2)流气式,工作寿命长。(3)能量分辨率好。(4)计数率高(1×10~(14)个/s)。(5)可测能区宽(0.183～10keV)。(6)可以方便更换窗膜材料、厚度及窗口直径。近几年来该计数管已经为高强度低能X光源提供较好监测。     

一种性能良好的高锰酸根离子选择电极

在异源四倍体棉种中现已鉴定出２２个芽黄突变体、２６个芽黄基因，其中Ｖ１与Ｖ７、Ｖ２之间存在着部分同源关系。重叠牙黄基因Ｖ１６Ｖ１７的遗传主式独特，单体１测验的分离世代Ｆ２和ＢＣ恢复产生了黄化的单体株。鉴于杂中子生产现状，俄系统阐述了以芽黄作为指示性进行棉花杂种优势利用的可行性。     

单模光纤中皮秒啁啾脉冲压缩

对单模光纤正群速色散区秒啁啾脉冲的非线性传进行了近似的解析分析和定量的数值计算。结果表明，负啁啾脉冲在传输过程中能得到有效压缩。压缩比与脉冲初始峰值功率和初始啁啾程度有关。初始峰值功率一定的脉冲，其压缩比随初始啁啾程度的增大面大，初始啁啾程度一定的脉冲，压缩比随初始峰值功率的增大而减小，表明自相位调制效应导致脉冲压缩效果变差。计算结果还表明，在脉冲时域宽度得到压缩的同时，光谱宽度也能得到同步压缩。     

Complexes in polymers IV. FTIR microscopic characterization of thin organic polymer films containing embedded transition-metal carbonyl complexes

Thin films of polystyrene (PS), poly(methyl methacrylate) (PMMA) and polystyrene-polyacrylonitrile copolymer (PS-AN), containing various embedded transition-metal complexes, have been studied by FTIR microscopy. The spatial distributions of the transition-metal carbonyl complexes throughout the thin organic polymer films have been determined by a two-dimensional IR mapping procedure. The spectral variations observed in the distribution of the metal carbonyls throughout the different polymer films are discussed. The IR data show that the technique used to prepare the organometallic-embedded thin films (viz. freeze-drying of solutions followed by hot mechanical pressing of the residues) does in general lead to homogeneous films which may eventually find industrial application, e.g. as membrane sensors for small molecules.     

Physico-Chemical Characterization of Yu Guo Beads(1100-771 B. C. ) in China

When was the earliest glass produced in China? This has still been a question so far. Some archaeologists have thought that Yu Guo beads are real glass, the earliest glass(1100-771 B. C. ) in China. However, more details of scientific investigations in this paper show that Yu Guo beads are mainly made of clastic quartz (>95%) with a small amount of clay and sintered under the low temperature(500-600℃). It is not a glassy body, but a kind of polycrystal ornaments.     

N2（A）及N（2D）对IF（X）的传能研究

在微波放电系统中,对NH_3-F-F_2-CF_3I体系进行研究,结果表明,向IF(X)传能的诸多媒介中,N_2(A)及N(~2D)起着主要作用,并且这一结论在经微波激发后的N_2与CF_3I的直接反应中得到了进一步证实。