Synthesis and characterization of Sr3Al2O6：Eu2＋, Dy3＋ phosphors prepared by sol-gel-combustion processing

A type of red luminescent Sr3Al2O6:Eu2+, Dy3+ phosphor powder is synthesised by sol-gel-combustion processing, with metal nitrates used as the source of metal ions and citric acid as a chelating agent of metal ions. By tracing the formation process of the sol-gel, it is found that it is necessary to reduce the amount of NO3- by dropping ethanol into the solution for forming a stable and homogeneous sol-gel. Thermogravimetric and Differential Scanning Calorimeter Analysis, x-ray diffractionmeter, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the luminescent properties of the as-synthesised Sr3Al2O6:Eu2+, Dy3+. The results reveal that the Sr3Al2O6 crystallises completely when the combustion ash is sintered at 1250 C. The excitation and the emission spectra indicate that the excitation broadband lies mainly in a visible range and the phosphors emit a strong light at 618 nm under the excitation of 472 nm. The afterglow of (Sr0.94Eu0.03Dy0.03)3Al2O6 phosphors sintered at 1250 ℃ lasts for over 1000 s when the excited source is cut off.     

描述甲烷在Pt(110)-(21)表面的化学吸附解离的密度泛函评估

本文探讨了几种梯度近似(GGA)密度泛函及元梯度近似(meta-GGA)密度泛函在描述甲烷在重构的Pt(110)-(2×1)上的解离化学吸附作用的适用性. 金属的体相和表面结构、甲烷的吸附能量和解离能垒等被用来评估泛函的可靠性. 另外,在从头算分子动力学计算中,采用范德瓦尔斯矫正的GGA函数(optPBE-vdW)和范德瓦尔斯矫正的meta-GGA函数(MS-PBEl-rVV10）计算粘附概率. 计算结果表明,使用这两种泛函能更好地与现有的实验结果吻合,从而为发展甲烷在Pt(110)-(2×1)表面解离的可靠机器学习势能面打下重要基础.     

裂解温度对CVD法制备多壁碳纳米管的影响

用SEM、TEM、HRTEM及拉曼光谱方法研究了催化裂解乙炔制备多壁碳纳米管过程中裂解温度的影响,结果表明,在650℃～700℃裂解乙炔,可获得产量高、直径分布均匀、石墨程度高的多壁碳纳米管,并对裂解温度影响机制进行了分析和探讨。     

航天器对接相对位置姿态自主测量方法研究

航天器间相对位置姿态的准确测量是实现自主自动对接的先决条件。将三圆标志靶安装在目标航天器上;追踪航天器用数码相机对靶拍照。设计了亚像素处理方法实时处理数字照片,可精确测定圆心像点位置和特征直径的像长;用其作为基本特征参数,基于透视投影原理,建立了求圆心物空间坐标的公式,求出靶面的平面方程,可用来求两航天器间的相对位置姿态参数和实时标定相机的可变参数。计算机仿真结果表明,测距为2m时,测圆心像点位置的误差小于0.03个像素,测距误差小于1mm,测姿态角的误差小于0.01°。该方法也适用于无人直升飞机定点着陆时自主测量其相对位姿参数。     

Synthesis,structural characterization,and olefin polymerization behavior of vanadium(III) complexes bearing bidentate phenoxy‐phosphine ligands

Vanadium(III) complexes bearing phenoxy‐phosphine ligands ( 2a–g ) (2‐R₁‐4‐R₂‐6‐PPh₂‐C₆H₂O)VCl₂(THF)₂ ( 2a : R₁ = R₂ = H; 2b : R₁ = F, R₂ = H; 2c : R₁ = Ph, R₂ = H; 2d : R₁ = tBu, R₂ = H; 2e : R₁ = R₂ = Me; 2f : R₁ = R₂ = tBu; 2g : R₁ = R₂ = CMe₂Ph) were prepared from VCl₃(THF)₃ by treating with 1.0 equiv of the ligand in tetrahydrofuran (THF) in the presence of excess triethylamine (TEA). The reaction of VCl₃(THF)₃ with 2.0 equiv of the ligand in THF in the presence of excess TEA afforded vanadium(III) complexes bearing two phenoxy‐phosphine ligands ( 3c–f ). These complexes were characterized by FTIR and mass spectrum as well as elemental analyses. Structures of 2f and 3c were further confirmed by X‐ray crystallographic analyses. Complexes 2a–g and 3c–f were employed as the catalysts for ethylene polymerization under various reaction conditions. On activation with Et₂AlCl, these complexes exhibited high catalytic activities (up to 41.3 kg PE/mmol_V·h·bar) even at high temperature (70°C), and produced high molecular weight polymer with unimodal molecular weight distributions, indicating the polymerization took place in a single‐site nature. Complexes 3c–f displayed better thermal stability than the corresponding complexes 2a–g under similar conditions. In addition, copolymerizations of ethylene and 1‐hexene with precatalysts 2a–g were also explored in the presence of Et₂AlCl. Catalytic activity, comonomer incorporation, and properties of the resultant polymers can be controlled over a wide range by tuning catalyst structures and reaction parameters.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Physically cross‐linked networks of POSS‐capped poly(acrylate amide)s: Synthesis,morphologies, and shape memory behavior

In this work, we synthesized a novel organic–inorganic semitelechelic polymer from polyhedral oligomeric silsesquioxane (POSS) and poly(acrylate amide) (PAA) via reversible addition‐fragmentation chain transfer (RAFT) polymerization. The organic–inorganic semitelechelic polymers have been characterized by means of nuclear magnetic resonance spectroscopy, thermal gravimetric analysis, and dynamic mechanical thermal analysis. It was found that capping POSS groups to the single ends of PAA chains caused a series of significant changes in the morphologies and thermomechanical properties of the polymer. The organic–inorganic semitelechelics were microphase‐separated; the POSS microdomains were formed via the POSS–POSS interactions. In a selective solvent (e.g., methanol), the organic–inorganic semitelechelics can be self‐assembled into the micelle‐like nanoobjects. Compared to plain PAA, the POSS‐capped PAAs significantly displayed improved surface hydrophobicity as evidenced by the measurements of static contact angles and surface atomic force microscopy. More importantly, the organic–inorganic semitelechelics displayed typical shape memory properties, which was in marked contrast to plain PAA. The shape memory behavior is attributable to the formation of the physically cross‐linked networks from the combination of the POSS–POSS interactions with the intermolecular hydrogen‐bonding interactions in the organic–inorganic semitelechelics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 587–600