Analyses of pesticide residues in fruit-based baby food by liquid chromatography/electrospray ionization time-of-flight mass spectrometry

A liquid chromatography/electrospray ionization time-of-flight mass spectrometry (LC/ESI-TOFMS) method has been developed for the determination of 12 pesticides (namely, carbendazim, thiabendazole, imazalil, tridemorph, triadimefon, bitertanol, prochloraz, flutriafol, myclobutanil, iprodione, diphenylamine and procymidone) in fruit-based baby food (multi-fruit jars and juices intended for infant consumption). The developed method consists of a sample treatment step based on liquid-liquid extraction using acetonitrile, followed by a clean-up step based on dispersive solid-phase extraction (SPE) with a primary-secondary amine (PSA). Multi-fruit and apple juices were processed by a SPE procedure using Oasis HLB cartridges. Subsequent identification and quantitation was accomplished by LC/ESI-TOFMS analysis: the confirmation of the target pesticides was based on accurate mass measurements of selected ions (protonated molecules ([M+H]+) and fragment ions). Confirmation studies were accomplished at low concentration levels (10 microg kg-1) and accuracy errors lower than 2 ppm were obtained in most cases. Baby food extracts spiked at 10 microg kg-1 fortification level yielded average recoveries in the range 78-105% with relative standard deviations less than 10% for most of the analytes. Limits of detection (LODs) were between 0.1 and 4 microg kg-1 depending on the pesticide studied. Finally, the proposed method was applied to a total of 33 baby food samples from Spain and the United Kingdom. Although imazalil, thiabendazole and carbendazim were detected in a high number--over 60%- of baby food samples, none of the samples tested were found to be above the 0.01 mg kg-1 EU standard.     

Chelating dialkoxide titanium complex: a versatile building block for the construction of heterometallic derivatives

The heterometallic complex [TiCp*(O(2)Bz)(2)AlMe(2)] (2) has been synthesised by reaction of [TiCp*(O(2)Bz)(OBzOH)] (1) with AlMe(3) (Cp*=eta(5)-C(5)Me(5); Bz=benzyl). Complex 1 reacts with HOTf to yield the cationic derivative [TiCp*(OBzOH)(2)]OTf (3) (HOTf=HSO(3)CF(3)). Compound 3 reacts with [{M(mu-OH)(cod)}(2)] (M=Rh, Ir; cod=cyclooctadiene) to render the early-late heterometallic complexes [TiCp*(O(2)Bz)(2){M(cod)}(2)]OTf (M=Rh (4); Ir (5)). The molecular structure of complex 4 has been established by single-crystal X-ray diffraction studies.     

Determination of pesticide residues in lettuce by gas chromatography with electron-capture detection

A sensitive, rapid, and simple multiresidue method for the simultaneous determination of 19 pesticides in different varieties of lettuce (Lactuca sativum) was developed. Lettuce samples were extracted by homogenization with acetone and partitioned into ethyl acetate-cyclohexane. Subsequent sample cleanup was not needed. Final determination was made by capillary gas chromatography (GC) with electron-capture detection (ECD). Confirmation analysis of pesticides was performed by GC coupled with mass spectrometry in the selected ion monitoring mode. The average recovery by the GC-ECD method obtained for these compounds varied from 66.4 to 119.2% with relative standard deviations < 7.7%. The GC-ECD method has good linearity, and the detection limit for the pesticides studied varied from 0.1 to 3.8 microg/kg. The proposed method was used to determine pesticide levels in different types of lettuce grown in soils from experimental fields.     

Application of a validated method in the stability study of colistin sulfate and methylparaben in a veterinary suspension formulation by high-performance liquid chromatography with a diode array detector

A methodology following International Cooperation on Harmonization for Veterinary Products (VICH) guidelines for the stability evaluation of colistin sulfate in a nonaqueous suspension pharmaceutical dosage form for veterinary use (via their drinking water) is described. This method monitors the percentage of colistin sulfate during the stability study of the preparation in drinking water and establishes the shelf life of the final product by a new high-performance liquid chromatography method which was developed and validated for the simultaneous determination of colistin sulfate [colistin A (Polymixin E1) and colistin B (Polymixin E2)] and methylparaben (Nipagin) using a diode array detector (DAD). The method uses a Kromasil C18 column and isocratic elution. The mobile phase consisted of an acetonitrile-sodium sulfate anhydrous solution (25 + 75) pumped at a flow rate of 1.5 mL/min. The DAD was set at 215 nm. The validation study was carried out according to the VICH guidelines in order to prove that the new analytical method meets the reliability characteristics, which include the fundamental criteria for validation: selectivity, linearity, precision, accuracy, and sensitivity. The method was applied during the quality control or stability studies of the suspension dosage form in order to quantify the drug (colistin) and preservative, and proved to be suitable for rapid and reliable quality control.     

Use of biofuels to produce hydrogen (reformation processes)

This tutorial review deals with the catalytic reformation of ethanol and glycerol to produce hydrogen that can be used as an energy carrier in a fuel cell. Both the worldwide production of ethanol in large amounts to be used as a biofuel and that of glycerol as a by-product in biodiesel manufacture are presented. The catalytic reformation processes of both ethanol and glycerol are contemplated, including thermodynamic and kinetic aspects. Catalysts are analyzed as a function of operation conditions, selectivity and stability.     

A comparison of solid-phase microextraction and stir bar sorptive extraction coupled to liquid chromatography for the rapid analysis of resveratrol isomers in wines, musts and fruit juices

A comparison of direct immersion solid-phase microextraction (DI-SPME) and stir bar sorptive extraction (SBSE) coupled to liquid chromatography (HPLC) with fluorimetric detection for the rapid analysis of resveratrol isomers is described. For DI-SPME, a polar Carbowax-template resin (CW/TPR) 50 μm fiber was the most efficient and optimum extraction conditions were 40 °C and an extraction time of 30 min, stirring in the presence of 5% (m/v) sodium chloride and 0.07 M acetate/acetic acid buffer (pH 6). Desorption was carried out using the static mode for 10 min. Linearity was obtained in the 5-150 and 2-150 ng mL⁻¹ ranges for trans- and cis-resveratrol, with detection limits of 2 and 0.5 ng mL⁻¹, respectively. When using SBSE, a polydimethylsiloxane (PDMS) twister provided best extraction by means of a derivatization reaction in the presence of acetic anhydride and potassium carbonate. The same time and temperature were used for the extraction step in the presence of 2.5% (m/v) sodium chloride, and liquid desorption was performed with 150 μL of a 50/50 (v/v) acetonitrile/1% (v/v) acetic acid solution in a desorption time of 15 min. Linearity was now between 0.5 and 50 ng mL⁻¹ for trans-resveratrol with a detection limit of 0.1 ng mL⁻¹, while cis-resveratrol could not be extracted. The proposed methods were successfully applied to determining the resveratrol isomer content of wine, must and fruit juices.     

Anion-dependent self-assembly of silver(I) and diaminotriazines to coordination polymers: non-covalent bonds and role interchange between silver and hydrogen bonds

New coordination polymers have been obtained by the self-assembly of silver salts AgX (X = BF 4, PF 6, CF 3SO 3) and 2,4-diamino-6-R-1,3,5-triazines L (R = phenyl and p-tolyl) of formulas AgLX ( 1- 6). A complex of different stoichiometry, [Ag 3L 2(H 2O)(acetone) 2](BF 4) 3, 7 (R = phenyl), has also been synthesized. The three-dimensional structures of five compounds have been determined by X-ray diffraction studies. For the AgLX complexes, when X = BF 4 and R = phenyl or p-tolyl, chiral chains with alternating Ag and L are formed. The chains are cross-linked by the counteranions in a three-dimensional fashion through hydrogen bonds and weak Ag...F interactions giving rise to a structure with solvent-filled channels. Different and more compact structures have been found when the counteranion is CF 3SO 3 (OTf). When R = phenyl, sheets are formed which consist of [Ag 2(OTf) 2L 2] units with double triflate bridges and which contain columns of pi-pi stacked arenes. Hydrogen bonds connect the sheets. When AgOTf is used and R is p-tolyl, a different and unusual ladderlike structure is obtained in which the rungs are double asymmetric bridges consisting of the triflate groups bonded to Ag in kappa (2) O,mu 2- O and kappa (1) O,mu 2- O fashion. The ladders are parallel to each other and are mutually linked by N-H...N hydrogen bonds to give a 3D architecture. A very similar ladderlike structure has been found for 7 but with a water molecule and a BF 4 (-) group acting as bridges. The role played by the hydrogen bonds in complex 6 to form the 3-D structure is played in 7 by [Ag(acetone) 2] fragments. The noncovalent interactions play an important role in the different solid-state 3D structures. The behavior of the new derivatives in solution has also been analyzed. A new species has been detected at low temperatures, and this exhibits restricted rotation of the phenyl ring.     

Structural studies of cyclic ureas: 1. Enthalpies of formation of imidazolidin-2-one and N,N′-trimethyleneurea

A thermophysical and thermochemical study has been carried out for crystalline imidazolidin-2-one and N,N′-trimethyleneurea [tetrahydropyrimidin-2(1H)-one]. The thermophysical study was made by differential scanning calorimetry, d.s.c., in the temperature intervals between T = 268 K and their respective melting temperatures. Several solid–solid transitions have been detected in imidazolidin-2-one. The standard (p^° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, for crystalline imidazolidin-2-one and N,N′-trimethyleneurea [tetrahydropyrimidin-2(1H)-one], were determined using static-bomb combustion calorimetry. The standard molar enthalpies of sublimation, at T = 298.15 K, for the two compounds were derived from the variation of their vapour pressures, measured by the Knudsen effusion method, with the temperature. These two thermochemical parameters yielded the standard molar enthalpies of formation of the two cyclic urea compounds studied in the gaseous phase at T = 298.15 K. These values are discussed in terms of molecular structural contributions and interpreted on the bases of the “benzo-condensed effect” and of the ring strain of imidazolidin-2-one.     

Selective Electrochemical Determination of Uric Acid in the Presence of Ascorbic Acid Using a Carbon Paste Electrode Modified with β‐Cyclodextrin

Uric acid (UA) was determined in the presence of ascorbic acid (AA) by using a carbon paste electrode modified superficially by a β‐cyclodextrin film (CPE/β‐CD). The surface carbon paste electrode was prepared applying a 30 cycles potential program and using a 1 M HClO₄+0.01 M β‐CD electrolytic solution. The UA and AA solutions were used to evaluate the electrode selectivity and sensitivity by cyclic voltammetric and amperometric methods. In these experiments the detection limit for UA was (4.6±0.01)×10^?6 M and the RSD calculated from the amperometric curves was 10%. From the data obtained it was possible to quantify UA in the urine and saliva samples. Selective detection of UA was improved by formation of an inclusion complex between β‐CD and UA. The results show that the CPE/β‐CD is a good candidate due to its selectivity and sensitivity in the UA determination in complex samples like the biological fluids.