Early-late heterobimetallic alkoxides as model systems for late-transition-metal catalysts supported on titania

Titanium complexes with chelating alkoxide ligands [TiCp*(O(2)Bz)(OBzOH)] (1) and [TiCp*(Me)((OCH(2))(2)Py)] (2) were synthesised by reaction of [TiCp*Me(3)] (Cp*=eta(5)-C(5)Me(5)) with 2-hydroxybenzyl alcohol ((HO)(2)Bz) and 2,6-pyridinedimethanol ((HOCH(2))(2)Py), respectively. Complex 1 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) to yield the early-late heterobimetallic complexes [TiCp*(O(2)Bz)(2)M(cod)] [M=Rh (3), Ir (4)]. Carbon monoxide readily replaces the COD ligand in 3 to give the rhodium dicarbonyl derivative [TiCp*(O(2)Bz)(2)Rh(CO)(2)] (5). Compound 2 reacts with [(M(mu-OH)(cod))(2)] (M=Rh, Ir) with protonolysis of a Tibond;Me bond to give [TiCp*((OCH(2))(2)Py)(mu-O)M(cod)] [M=Rh (6), Ir (7)]. The molecular structures of complexes 3, 5 and 7 were established by single-crystal X-ray diffraction studies.     

Comparative study on the determination of cephalexin in its dosage forms by spectrophotometry and HPLC with UV-vis detection

This paper discusses the spectrophotometric determination of cephalexin as the intact cephalexin or as its acid-induced degradation product. Cephalexin can be determined in the range 1 × 10^–5–18 × 10^–5 M with relative standard deviations of 5-1%. The limits of quantitation and detection were 10^–5 and 0.3 × 10^–5 M, respectively. These procedures were compared with reversed-phase HPLC determination. No interference was observed in the presence of common pharmaceutical adjuvants. The H-point standard additions method was applied in order to correct for the possible presence of the cephalexin precursor, 7-aminocephalosporanic acid; this improves the selectivity of the UV-vis spectrophotometric method.     

Application of ultrasound-assisted acid leaching procedures for major and trace elements determination in edible seaweed by inductively coupled plasma-optical emission spectrometry

A new method using diluted reagents (nitric and hydrochloric acids and oxygen peroxide) and ultrasound energy to assist metals acid leaching with from edible seaweed was optimized. The method uses a first sonication at high temperature with hydrochloric acid as a previous stage to an ultrasound-assisted acid leaching with 7 ml of an acid solution containing nitric acid, hydrochloric acid and hydrogen peroxide at concentrations of 3.7, 3.0 and 3.0 M, respectively. Optimum conditions for the first sonication step were ultrasound energy at 17 kHz, sonication temperature at 65 °C, an acid volume of 2 ml, an hydrochloric acid concentration of 6.0 M and a sonication time of 10 min. It has been found that the first sonication stage at high temperature with hydrochloric acid is necessary to obtain quantitative recoveries for As, Ba, Fe and V. Otherwise quantitative recoveries were reached for the other elements investigated (Ca, K, Na, Mg, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The repeatability of the ultrasound-assisted acid leaching method was around 10% for all elements. Adequate limit of detection and limit of quantification were reached by using inductively coupled plasma-optical emission spectrometry (ICP-OES) for measurements. The method resulted accurate after analysing several seaweed certified reference materials (IAEA-140/TM, NIES-03 and NIES-09). The method was finally applied to the multi-element determination in edible seaweed samples.     

The Potential Energies of Cohesion of a Crystalline Organic Enantiomer and the Racemate; on the Energy for the Liquid Racemate [1]

The cohesion potential energy of the crystal of one enantiomer of ethyl 3-cyano-3-(3,4-dimethyloxyphenyl)-2,2,4-trimethylpentanoate, −47.7 ± 0.1 kJ mol⁻¹ (0–90°C), was found out from the heat of sublimation (123.2 ± 5.1 kJ mol⁻¹, 78.6°C) and the kinetic energies for the gas phase and the crystal. It was found that the entropy function of Debye’s theory of solids mathematically agreed with the vibrational entropy of the gas (variationally obtained), allowing to disclose the vibrational energy using the Debye energy function (E _vib 835.0 kJ mol⁻¹ (78.6°C), E ⁰ included). E _kin for the crystal (771.1 kJ mol⁻¹ (78.6°C)) was obtained by Debye’s theory with the experimental heat capacity. The cohesion energy represented a moderate part of the sublimation energy. The cohesion energy of the racemic crystal, −44.2 kJ mol⁻¹, was obtained by the heat of formation of the crystal in the solid state (3.0 kJ mol⁻¹, 83.3°C) and E _kin for the crystal (by Debye’s theory). The decrease in cohesion on formation of the crystal accounted for the energy of formation. The change in potential energy on liquefaction of the racemate from the gas state was disclosed obtaining added-up E _{vib + rot} for the liquid in the way as to E _vib for the gas, the Debye entropy function being increasedly suited for the liquid (E _{vib + rot} 763.4 kJ mol⁻¹ (115.4°C)). Positive ΔE _pot, 13.0 kJ mol⁻¹, arised from the increase in electronic energy (Δ _l ν_mean − 154.3 cm⁻¹, by the dielectric nature of the liquid), added to the cohesion energy.     

Silica-supported PtSn alloy doped with Ga, In or, Tl: Characterization and catalytic behaviour in n-hexane dehydrogenation

Silica-supported trimetallic catalysts containing Pt, Sn and a group 13 metal (PtSnM, M=Ga, In, Tl) were prepared by consecutive impregnation steps from cis-[PtCl₂(PPh₃)₂] and chloride precursors. X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (ED) and energy dispersive X-ray analysis (EDX) showed large platelet-like particles of PtSn_1−xM_x phases. PtSnGa catalyst with a Pt/(Sn+Ga) molar ratio of 1.72 showed a bimodal particle distribution and a Pt phase was identified. Differences in surface structures were also revealed by the performance of catalysts in the dehydrogenation of n-hexane. For PtSnIn and PtSnTl (Pt/(Sn+M) molar ratio of about 1) the dehydrogenation was favoured. In contrast, PtSnGa catalyst yielded hydrogenolysis products. Photoelectron spectra showed the Pt 4f_7/2 level at a binding energy of 70.0–71.8 eV in all cases. Moreover, the FT-IR spectra of chemisorbed CO on the PtSnGa showed a slight shift in the ν(CO) toward higher values with respect to the monometallic catalyst, pointing to an electronic effect in accordance with photoelectron spectroscopy.     

Reactivity of amino acids in nitrosation reactions and its relation to the alkylating potential of their products

Nitrosation reactions of amino acids with an -NH(2) group [namely, six alpha-amino acids (glycine, alanine, alpha-aminobutyric acid, alpha-aminoisobutyric acid, valine, and norvaline); two beta-amino acids (beta-alanine and beta-aminobutyric acid), and one gamma-amino acid (gamma-aminobutyric acid)] were studied. Nitrosation was carried out in aqueous acid media, mimicking the conditions of the stomach lumen. The rate equation was r = k(3)(exp)[amino acid][nitrite](2), with a maximum k(3)(exp) value in the 2.3-2.7 pH range. The existence of an isokinetic relationship supports the argument that all the reactions share a common mechanism. A nitrosation mechanism is proposed, and the following conclusions are drawn: (i) Nitrosation reactions of amino acids with a primary amino group in acid media occur with dinitrogen trioxide as the main nitrosating agent. The finding that the nitrosation rate is proportional to the square of the nitrite concentration suggests that the yield of nitrosation products in the stomach would increase sharply with higher nitrate/nitrite intakes. (ii) Stomach hypochlorhydria could be a potential enhancer of in vivo amino acid nitrosation. (iii) The reactivity (k(3)()(exp)) [alpha-amino acids > beta-amino acids > gamma-amino acids] is the same as that found in a previous work for the alkylating potential of lactones formed from nitrosation products of the same amino acids. This implies that the nitrosation reactions of the most common natural amino acids are the most efficient precursors of the most powerful alkylating agents. (iv) The order of magnitude (10(7)-10(8) M(-1) s(-1)) of the bimolecular rate constants of nitrosation shows that such reactions occur through an encounter process.     

The Genus Cetraria s. str.—A Review of Its Botany,Phytochemistry, Traditional Uses and Pharmacology

The genus Cetraria s. str. (Parmeliaceae family, Cetrarioid clade) consists of 15 species of mostly erect brown or greenish yellow fruticose or subfoliose thallus. These Cetraria species have a cosmopolitan distribution, being primarily located in the Northern Hemisphere, in North America and in the Eurasia area. Phytochemical analysis has demonstrated the presence of dibenzofuran derivatives (usnic acid), depsidones (fumarprotocetraric and protocetraric acids) and fatty acids (lichesterinic and protolichesterinic acids). The species of Cetraria, and more particularly Cetraria islandica, has been widely employed in folk medicine for the treatment of digestive and respiratory diseases as decoctions, tinctures, aqueous extract, and infusions. Moreover, Cetraria islandica has had an important nutritional and cosmetic value. These traditional uses have been validated in in vitro and in vivo pharmacological studies. Additionally, new therapeutic activities are being investigated, such as antioxidant, immunomodulatory, cytotoxic, genotoxic and antigenotoxic. Among all Cetraria species, the most investigated by far has been Cetraria islandica, followed by Cetraria pinastri and Cetraria aculeata. The aim of the current review is to update all the knowledge about the genus Cetraria covering aspects that include taxonomy and phylogeny, morphology and distribution, ecological and environmental interest, phytochemistry, traditional uses and pharmacological properties.