Nitric oxide binding and photodelivery based on ruthenium(II) complexes of 4-arylazo-3,5-dimethylpyrazole

Two fluorescent ligands, 3,5-dimethyl-4-(6'-sulfonylammonium-1'-azonaphthyl)pyrazole (dmpzn, 1) and 3,5-dimethyl-4-(4'-N,N'-dimethylaminoazophenyl)pyrazole (dmpza, 2) were obtained by condensation of ketoenolic derivatives with hydrazine. 1 and 2 formed the novel dinuclear complexes [(H(2)O)(3)ClRu(micro-L)(2)RuCl(H(2)O)(3)] (3 or 4) and [(H(2)O)(NO)Cl(2)Ru(micro-L)(2)RuCl(2)(NO)(H(2)O)] (6 or 7) (where L 1 = 2 or , respectively) which were characterized by IR, NMR and elemental analysis. The nitrosyl complexes were prepared by bubbling purified nitric oxide through methanol solutions of the corresponding ruthenium(II) chloroderivative or by reaction of the appropriate ligands with Ru(NO)Cl(3). Complexes 3 and 4 were found to bind NO, resulting in an increase in fluorescence. Ligand 1 also formed the mononuclear nitrosyl complex [Ru(NO)(bpy)(2)(dmpzn)]Cl(2) (8) which released NO in water at physiological pH and in the solid state as revealed by fluorescence and IR measurements, respectively.     

Electrophoretic field gradient focusing: an investigation of the experimental parameters

Electrophoretic field gradient focusing has been used to separate the two oxidation states of myoglobin (Mb), and to separate Mb from bromophenol blue (BPB). Polyacrylamide and Sephadex were shown to be suitable packing materials whilst silica led to band broadening with Mb. BPB and Mb could be simultaneously focused apart using either a fixed 21-electrode setup or a dynamic 6-electrode setup. Using a dynamic three-electrode setup either analyte could be focused but not both simultaneously. It was shown that a higher ionic strength buffer in the separation channel compared to the coolant channel enhanced focusing between electrodes due to a conductivity gradient. Different running buffers were investigated and it was found that using a pH 8.6 buffer containing N,N,N-tris(hydroxymethyl)aminomethane (Tris) and phosphate ions the oxidation states of Mb could be separated but the separation of Mb from BPB was not as good as would be hoped for. Using a pH 8.6 buffer containing Tris, N-2-hydroxyethylpiperazine-N'-3-propanesulphonate and chloride ions as running buffer, BPB and Mb could be well separated but the two oxidation states of Mb merged.     

A polymerase chain reaction-restriction fragment length polymorphism method based on the analysis of a 16S rRNA/tRNA(Val) mitochondrial region for species identification of commercial penaeid shrimps (Crustacea: Decapoda: Penaeoidea) of food interest

A simple PCR-RFLP method has been developed for the identification of 19 penaeid shrimp species of food interest belonging to the superfamily Penaeoidea. Preliminary amplification, sequencing and alignment of a 960 bp fragment of the 16S rRNA/tRNA(Val)/12S rRNA mitochondrial region allowed the design of 16Scru4/16Scru4 primers, constructed on well-conserved mitochondrial sequences of the penaeid shrimp species considered. Such primers afforded the amplification of an internal 515-535 bp region of the 16S rRNA/tRNA(Val) genes that, when subjected to cleavage with AluI, TaqI and HinfI, provided species-specific restriction patterns. Moreover, the proposed method also allowed the definition of different intraspecific restriction types between different populations of Litopenaeus vannamei, Farfantepenaeus notialis, Fenneropenaeus merguiensis, Metapenaeus sp., Melicertus latisulcatus and Pleoticus muelleri of different origins. The method described here was also successfully applied for the identification of penaeid shrimps in complex processed precooked foods, where this type of shellfish is used as an added-value food ingredient. Sequencing analysis provided new information about the genetic relationships among shrimps not only at the levels of species and genus, but also among different populations at intraspecific level. The 16S rRNA/tRNA(Val) fragment considered in this study seems to be accurate for shrimp species identification in raw and processed foodstuffs and for phylogenetic analysis among penaeid shrimp species.     

Comparison of stir bar sorptive extraction and membrane-assisted solvent extraction for the ultra-performance liquid chromatographic determination of oxazole fungicide residues in wines and juices

The present study compares two new sample preparation methods, stir bar sorptive extraction (SBSE) and membrane-assisted solvent extraction (MASE) coupled to the novel technique of ultra-performance liquid chromatography (UPLC) for the sensitive, selective and solvent-free determination of six oxazole fungicide residues (hymexazol, drazoxolon, vinclozolin, chlozolinate, oxadixyl and famoxadone) in wine and juices. The analytes were separated on a rapid resolution C(18) column (50 mm x 4.6 mm, I.D., 1.8 microm) thermostated at 50 degrees C with isocratic elution using a 50/50 (v/v) water/acetonitrile (ACN) mobile phase at a flow-rate of 1 mL min(-1) and detected by diode-array detection (DAD). The UPLC method rapidly separates the fungicides (7 min). The best results as regards sensitivity, repeatability and analyte recovery were obtained using SBSE with a polydimethylsiloxane (PDMS) twister, at 60 degrees C for 30 min with stirring at 1700 rpm in the presence of a 0.1M acetate/acetic acid buffer (pH 5) and 20% (m/v) sodium chloride. Liquid desorption was performed with 100 microL of a 80/20 (v/v) ACN/water solution in a desorption time of 15 min. With the PDMS polymer, an apolar phase, hymexazol and oxadixyl were not extracted. Consequently, the SBSE procedure can only be applied to the other four fungicides. Detection limits ranged from 0.05 to 2.5 microgL(-1) at a signal to noise ratio of 3, depending on the compound. Recoveries obtained for spiked samples were satisfactory (83-113%) for all compounds. The proposed method was successfully applied to the analysis of different samples, residues of chlozolinate and drazoxolon being found in samples of red wine and grape juice, respectively.     

Analysis of polybrominated diphenyl ethers in atmospheric deposition and snow samples by solid-phase disk extraction

An extraction method for the quantitative analysis of polybrominated diphenyl ethers (PBDEs) in aqueous samples has been evaluated. The analytical methodology includes the sample filtration through glass fiber filter and subsequent extraction of dissolved phase compounds by C18 solid-phase disk extraction. Dependence of extraction efficiency on factors such as pollutant concentrations, sample volume, and stability during storage has been investigated. Mean extraction efficiencies of 97% for total PBDEs (13 tri- to heptabrominated congeners at spiking levels in the range of 15-90pg) with a RSD between 9 and 20% were achieved. Higher recoveries were observed for the more volatile PBDEs (112%) in relation to more brominated congeners (88%). The developed methodology was successfully applied to the analysis of these compounds in atmospheric deposition and snow samples from remote sites in Europe with method detection and quantitation limits in the range of 2.1-10pgL(-1) for almost all congeners, which allow the determination of PBDEs in remote areas with levels in the range of low to medium pgL(-1) for SigmaPBDEs.     

A simple helical macrocyclic polyazapyridinophane as a stereoselective receptor of biologically important dicarboxylates under physiological conditions

The interaction of a synthetic enantiopure azamacrocyclic receptor (L) with biologically important chiral dicarboxylates (A, 1-7) has been studied by means of potentiometric titrations in 0.15 M NaCl aqueous solution in a wide pH range. This macrocycle forms strong complexes of the type [HnLA](n-2) (with n = 0-5). As a general trend, the binding is much tighter at basic or neutral pH than in acidic medium. Interestingly, nonprotected excitatory amino acids (Asp and Glu) are strongly bound even at acidic pH. Regarding selectivity, the receptor showed stereoselective binding toward those substrates bearing an H-bonding donor at Calpha, being S-selective in most of the cases, except for glutamic acid. Thus, L displayed an excellent enantioselectivity for (S)-malate dianion (KS/KR = 11.50 at pH 10.0 and KS/KR = 6.86 at pH 7.0) and exhibited moderate enantiopreference for (S,S)-tartrate (KSS/KRR = 3.01 at pH 10 and KSS/KRR = 1.70 at pH 7.0). For this last anion, a very good diastereopreference was also observed (KSS/KRS = 8.46 at pH 10 and KSS/KRS = 4.99 at pH 7.0). On the contrary, L is smoothly R-selective toward (R)-Glu (KR/KS = 3.22 at pH 10 and KR/KS = 2.05 at pH 7.0) due to its longer and more flexible molecular structure. The stereoselectivity of the corresponding complexes decreased when decreasing pH values. For the hydroxy derivatives, mass spectrometry also reflected the trends observed by potentiometry and confirmed the receptor:dicarboxylate 1:1 stoichiometry of the supramolecular complexes. Additional experimental techniques were used to study the most stereoselective example. Solution studies by NMR suggested a good geometrical complementarity between the malate dianion and the receptor, which showed a predominant helical conformation in solution. Besides, self-diffusion rates (PGSE) of the diastereomeric complexes with malate also agree with binding data. Circular dichroism was also used in this case at different pH values, showing a very good correlation between the helical content of the receptor and the stereoselectivity of the molecular recognition process.     

Synthesis and reactivity of functionalized bridged m-xylylenedioxycalix[6]arenes

The synthesis of A,D-m-xylylene-bridged calix[6]arenes 1-8 functionalized at position 5 of the spacer arm is described. The cone conformation of the new bridged calix[6]arenes has been established by (1)H and (13)C NMR. The X-ray structure of compound 6 confirmed the cone conformation also in the solid state. Compounds 9 and 10, which are branched-like structures, were obtained by reductive amination of 5-amino-A,D-m-xylylene-bridged-B,C,E,F-tetra-O-ethylcalix[6]arene 7 with diformyl calix[4]arene and CTV derivatives 22 and 24, respectively.     

Highly Sensitive Enzyme-free Sensor Based on a Carbon Paste Electrode Modified with Binary Zinc Oxide/Polyaniline Nanocomposites for Dopamine,Ascorbic Acid and Uric Acid Sensing

Hybrid composites ZnO/PANI were facily synthesized by a sonication process at room temperature. This procedure is non-expensive, time/energy saving and environmentally safe. The as-prepared ZnO/PANI were characterized by FTIR, UV-vis spectroscopies and SEM in order to investigate the structure and morphology of the studied composites. The samples were used to modify carbon paste electrode (CPE) in order to develop electrochemical biosensors (ZnO/PANI/CPE). The sensing properties of the nanoparticles were evaluated for dopamine, ascorbic acid and uric acid non-enzymatic detection. The effect of percentage of polyaniline in the composites and the effect of calcination on the biosensor's response were also examined in the present study. It was revealed that the existence of PANI in ZnO/PANI/CPE largely enhanced the electroactive surface area and therefore the sensitivity for electrochemical sensing. A good electrochemical behavior was noted for ZnO/40 wt% PANI-cal/CPE modified electrode toward DA, AA and UA oxidation. The electroactive surface area of the previously mentioned modified electrode (0.235 cm²) was two times higher than that of the bare electrode (0.117 cm²). The liner relationships between current intensities and concentrations were found to be 0.01–1.4 mM, 0.1–1.3 mM and 0.01–0.12 mM, with detection limit of 0.029 mM, 0.063 mM and 0.007 mM, for DA, AA and UA respectively. In the mixtures of ascorbic acid (AA), dopamine (DA) uric acid (UA) and glucose (Glu) the sensor showed high selectivity of DA with low interference of ascorbic acid by a current change of 14 %. The as-prepared ZnO/PANI/CPE biosensor displayed a good reproducibility and stability.     

Study of alloxydim photodegradation in the presence of natural substances: Elucidation of transformation products

A photodegradation study of alloxydim was performed under simulate solar irradiation (Suntest apparatus) at different irradiation intensities. Moreover, indirect photolysis of the tested herbicide was investigated under the presence of various concentrations of humic acids (HA), nitrate and Fe (III) ions. The photodegradation of alloxydim follows a first-order reaction kinetics in all cases. HA inhibited the photolysis kinetic whereas rate constants measured in the presence of nitrate ions indicated no effect on degradation. On the contrary, Fe (III) ions enhanced the photodegradation rate of alloxydim. Kinetics experiments were monitored by HPLC–DAD and the half-lives ranged from 165.78 to 4.63 min for different intensities in direct photolysis and from 104.81 to 1.14 min for indirect photolysis. The study of transformation products have been investigated by HPLC coupled to quadrupole time-of-flight mass spectrometry (QTOF-MS) employing the electrospray technique.The most important transformation process was found to be the cleavage of the O–N bond of the oxime moiety. Minor photo-isomerization to Z-isomer was also observed. The appearance of these degradation products is reported in aqueous media for the first time.