Antibiotic protected silver nanoparticles for microbicidal cotton

Surface coating of metal nanoparticles is one of the major aspects to be optimized in the design of antimicrobial nanoparticles. The novelty of this work is that antimicrobial derivatives have been used as stabilizers to protect silver nanoparticles (Ag NPs). Microbicidal activity studies of fabricated cotton textiles coated with these Ag@Antibio were performed. Protective ligand layers of Ag NPs resulted to be a deterministic factor in their antimicrobial activity. The best bactericidal activity was obtained for Fabric TAM (coated with Ag NPs with triarylmethane derivates in surface, Ag@TAMSH), with a bacterial decrease of 3 log units for the S. aureus strain. Intrinsic antibiotic activity and partial positive charge of the TAMSH probably enhanced their antimicrobial effects. Fabric Eu (coated with Ag NPs with eugenol derivates in surface, Ag@EugenolSH) and Fabric FQPEG (coated with Ag NPs embedded in PEG-fluoroquinolone derivatives in surface, Ag@FQPEG) displayed antibacterial activity for both Staphylococcus aureus and Pseudomonas aeruginosa strains. These coated antimicrobial cotton fabrics can be applied in different medical textiles.     

Inner-Sphere Oxygen Activation Promoting Outer-Sphere Nucleophilic Attack on Olefins

Alkoxylation and hydroxylation reactions of 1,5-cyclooctadiene (cod) in an iridium complex with alcohols and water promoted by the reduction of oxygen to hydrogen peroxide are described. The exo configuration of the OH/OR groups in the products agrees with nucleophilic attack at the external face of the olefin as the key step. The reactions also require the presence of a coordinating protic acid (such as picolinic acid (Hpic)) and involve the participation of a cationic diolefin iridium(III) complex, [Ir(cod)(pic)₂]⁺, which has been isolated. Independently, this cation is also involved in easy alkoxy group exchange reactions, which are very unusual for organic ethers. DFT studies on the mechanism of olefin alkoxylation mediated by oxygen show a low-energy proton-coupled electron-transfer step connecting a superoxide–iridium(II) complex with hydroperoxide–iridium(III) intermediates, rather than peroxide complexes. Accordingly, a more complex reaction, with up to four different products, occurred upon reacting the diolefin–peroxide iridium(III) complex with Hpic. Moreover, such hydroperoxide intermediates are the origin of the regio- and stereoselectivity of the hydroxylation/alkoxylation reactions. If this protocol is applied to the diolefin–rhodium(I) complex [Rh(pic)(cod)], free alkyl ethers ORC₈H₁₁ (R=Me, Et) resulted, and the reaction is enantioselective if a chiral amino acid, such as l -proline, is used instead of Hpic.     

Characterization of the Phytochemical Profiles and Biological Activities of Ajuga chamaepitys subsp. chia var. chia and Ajuga bombycina by High-Performance Liquid Chromatography–Electrospray Ionization–Tandem Mass Spectrometry (HPLC–ESI–MSn)

This study investigates into the pharmacological potential of three solvent extracts (ethyl acetate, methanol, and water) of two Ajuga species (Ajuga chamaepitys subsp. chia var. chia and Ajuga bombycina) based on their antioxidant activity and enzyme inhibitory effects along with establishing the phytochemical profile. Spectrophotometric and high-performance liquid chromatography–electrospray ionization–tandem mass spectrometry (HPLC–ESI–MSⁿ) were used to determine the total and individual phytocompounds, respectively. Antioxidant potential was assessed using different assays such as DPPH, ABTS, CUPRAC, FRAP, phosphomolybdenum, and metal chelation. Enzyme inhibitory effects were studied against acetylcholinesterase, butyrylcholinesterase, tyrosinase, α-amylase, and α-glucosidase. The aqueous extract of both plants showed better ABTS scavenging, FRAP, and metal chelating activities. The methanol extracts displayed the highest tyrosinase inhibitory and antioxidant activity in the phosphomolybdenum assay while the ethyl acetate extracts of both plants showed better butyrylcholinesterase (BChE), α-amylase, and α-glucosidase inhibition. The total phenolic content was highest in the aqueous extract of A. chamaepitys while the methanolic extract of A. bombycina showed the highest flavonoid content. Identification by HPLC–ESI–MSⁿ revealed the presence of some individual compounds including phenolic acids, flavonoids, iridoid glycosides, phenylethanoid glycosides, and other compounds. To conclude, both A. chamaepitys and A. bombycina can be considered as rich sources of phytocompounds to manage chronic diseases.     

Stir bar sorptive extraction coupled to liquid chromatography for the analysis of strobilurin fungicides in fruit samples

A stir bar microextraction (SBSE) procedure for the determination of seven strobilurin fungicides in fruit samples using liquid chromatography (LC) and diode array detection (DAD) has been developed. The samples were sonicated in the presence of ethanol before submitting the extracts to SBSE. The incorporation of drazoxolon as an internal standard before SBSE allowed calibration without the need to use the standard additions method. Under the optimized conditions, detection limits were in the 0.3–2 ng g⁻¹ range, corresponding to trifloxystrobin and metominostrobin, respectively. The SBSE–LC–DAD procedure showed good repeatability (RSD below 11% in all cases) and provided recoveries of 80–105% from spiked samples. The method was applied to fifteen fruit samples, and low levels of pyraclostrobin and trifloxystrobin were found in two of them.     

Use of a continuous flow solid-phase spectroscopic sensor using two sensing zones: determination of thiamine and ascorbic acid

A simple, rapid, inexpensive, and automated flow-through solid-phase spectroscopic sensing device is proposed for the sequential determination of 2 vitamins: thiamine and ascorbic acid. The vitamins are concentrated on ion-exchange gels, thiamine on Sephadex SP C-25, and ascorbic acid on Sephadex QAE A-25; both solid supports are packed in 2 different flow cells. The absorbance is monitored directly on the solid phase with a double-beam spectrophotometer at 250 nm, without derivatization or additional elution. With the use of 2 carrier/self-eluting solutions (0.1 5M sodium acetate/acetic acid and 0.18M citric acid/K2HPO4) and a sample volume of 1000 microL, the sensor responds linearly in the range of 0.5-15 and 3-50 microg/mL with detection limits of 0.14 and 0.36 microg/mL for thiamine and ascorbic acid, respectively. When the method was applied to synthetic samples and pharmaceutical preparations, precise and accurate values were obtained.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

Unprecedented eight-palladium(I) crown-cycle with metal-metal unsupported bonds

Tri(N-pyrrolyl)phosphine reacted with the sigma/pi complex [Pd(mu-Cl)(COD-MeO)]2 to give the octa-cycle [Pd(mu-Cl)[P(pyrl)3]]8 containing four Pd(I)-Pd(I) unbridged bonds.     

Liquid chromatography with ultraviolet absorbance detection for the analysis of tetracycline residues in honey

The separation of tetracyclines (TCs) using reversed-phase liquid chromatography (LC) is proposed. The use of an amide-based stationary phase prevents the interaction of tetracyclines with the residual silanol groups and thus avoids the appearance of tailed peaks. Detection was based on using an UV spectrophotometer and gradient elution with acetonitrile-oxalic acid as mobile phase permitted good separation of all the peaks. Specificity was demonstrated by the retention characteristics, UV spectra and peak purity index. Linearity, precision, recovery and sensitivity were satisfactory. The procedure was applied to the analysis of tetracycline residues (tetracycline, oxytetracycline (OTC), chlortetracycline (CTC), doxycycline (DC), minocycline (MINO) and methacycline (MTC)) in honey of different types. Extraction involved using a mild acidic solvent containing EDTA to release protein-bound or sugar-bound tetracyclines. For the clean-up step, solid phase extraction using phenyl cartridges was applied. Detection limits in the honey using the proposed procedure are between 15 and 30 ng g(-1), depending on the tetracycline.     

Molecularly imprinted SPE and MEKC with in-capillary sample preconcentration for the determination of digoxin in human urine

Molecularly imprinted solid-phase extraction (MISPE) combined with MEKC was used for clean-up, preconcentration and determination of digoxin in the presence of its aglycon digoxin (digoxigenin) in human urine samples. In addition, the use of an in-capillary sample concentration electrophoretic technique by sweeping was investigated to enhance the concentration sensitivity in MEKC. The highly selective, fast and effective sample pretreatment by MISPE along with the preconcentration by sweeping could overcome the low sensitivity of the highly efficient capillary electrophoresis separation with UV detection. The optimization of the variables affecting the separation as well as MISPE conditions procedure was carried out to select the best conditions of selectivity and sensitivity to determine digoxin at low concentration levels in urine. To demonstrate the suitability of the developed method several analytical characteristics (selectivity, linearity, accuracy, precision, and LOD) were evaluated. Satisfactory results were obtained in terms of linearity (r > 0.99), recovery (95.4-96.5% with RSD from 1.3% to 2.6%), precision (RSD from 0.3% to 1.7% for migration times and from 2.1% to 7.3% for corrected peak areas), and sensitivity (LODs of 6 μg/L with 5 mL of sample or 1.2 μg/L with 25 mL). The proposed MISPE-MEKC method was satisfactorily applied to the analysis of spiked human urine samples achieving a concentration factor up to 7500-fold.     

Comparison of Three Analytical Methods for the Determination of Quinolones in Pig Muscle Samples

This work presents a comparison between three analytical methods developed for the simultaneous determination of eight quinolones regulated by the European Union (marbofloxacin, ciprofloxacin, danofloxacin, enrofloxacin, difloxacin, sarafloxacin, oxolinic acid and flumequine) in pig muscle, using liquid chromatography with fluorescence detection (LC–FD), liquid chromatography–mass spectrometry (LC–MS) and liquid chromatography-tandem mass spectrometry (LC–MS/MS). The procedures involve an extraction of the quinolones from the tissues, a step for clean–up and preconcentration of the analytes by solid-phase extraction and a subsequent liquid chromatographic analysis. The limits of detection of the methods ranged from 0.1 to 2.1 ng g⁻¹ using LC–FD, from 0.3 to 1.8 using LC–MS and from 0.2 to 0.3 using LC–MS/MS, while inter- and intra-day variability was under 15 % in all cases. Most of those data are notably lower than the maximum residue limits established by the European Union for quinolones in pig tissues. The methods have been applied for the determination of quinolones in six different commercial pig muscle samples purchased in different supermarkets located in the city of Granada (south-east Spain).