基于影像处理的干涉测量相位重构研究

随着计算机技术和光电成像元件的发展,影像信息处理技术已经在无损检测、医学检测以及干涉测量等领域得到广泛应用。本文主要研究了影像信息在干涉测量领域的波前相位提取方法。干涉条纹图是干涉测量领域中影像信息的载体,在干涉条纹处理方面,针对空域卡雷算法的特点,提出一种基于影像处理的单幅闭合干涉条纹图相位重构新算法。在空域卡雷算法处理方法的基础上,利用迭代修正算法对干涉图相位进行二次逼近,实现了对单幅干涉条纹图的高精度相位重构。Matlab仿真结果表明,迭代修正后的相位残差降低了25.8%,表明该算法在空域卡雷算法的基础上能够有效提高相位重构精度,实现干涉测量领域中影像信息的高精度处理。     

Adaptive Mixed GMsFEM for Flows in Heterogeneous Media

In this paper, we present two adaptive methods for the basis enrichment of the mixed Generalized Multiscale Finite Element Method (GMsFEM) for solving the flow problem in heterogeneous media. We develop an a-posteriori error indicator which depends on the norm of a local residual operator. Based on this indicator, we construct an offline adaptive method to increase the number of basis functions locally in coarse regions with large local residuals. We also develop an online adaptive method which iteratively enriches the function space by adding new functions computed based on the residual of the previous solution and special minimum energy snapshots. We show theoretically and numerically the convergence of the two methods. The online method is, in general, better than the offline method as the online method is able to capture distant effects (at a cost of online computations), and both methods have faster convergence than a uniform enrichment. Analysis shows that the online method should start with a certain number of initial basis functions in order to have the best performance. The numerical results confirm this and show further that with correct selection of initial basis functions, the convergence of the online method can be independent of the contrast of the medium. We consider cases with both very high and very low conducting inclusions and channels in our numerical experiments.     

Triazole–containing zinc(II)dipicolylamine-functionalised peptides as highly selective pyrophosphate sensors in physiological media

A small family of linear bis[zinc(II)dipicolylamine] (bis[Zn(II)-DPA])-functionalised peptidic anion receptors has been prepared where the Zn(II)-DPA binding sites have been installed via either a reductive amination reaction or a copper(I)-catalysed azide-alkyne cycloaddition reaction. The latter reaction connects the Zn(II)-DPA binding site and the peptide backbone through a 1,2,3-triazole linkage. Subsequent anion binding studies using indicator displacement assays were conducted to elucidate the effect of the triazole linker on the anion-binding properties of these novel receptors and it was found that the triazole-containing receptors exhibited stronger affinity and slightly improved selectivity for pyrophosphate over adenosine triphosphate and adenosine diphosphate compared to the analogous receptors which did not bear the triazole linker.     

Quantitative comparison between crowd models for evacuation planning and evaluation

Crowd simulation is rapidly becoming a standard tool for evacuation planning and evaluation. However, the many crowd models in the literature are structurally different, and few have been rigorously calibrated against real-world egress data, especially in emergency situations. In this paper we describe a procedure to quantitatively compare different crowd models or between models and real-world data. We simulated three models: (1) the lattice gas model, (2) the social force model, and (3) the RVO2 model, and obtained the distributions of six observables: (1) evacuation time, (2) zoned evacuation time, (3) passage density, (4) total distance traveled, (5) inconvenience, and (6) flow rate. We then used the DISTATIS procedure to compute the compromise matrix of statistical distances between the three models. Projecting the three models onto the first two principal components of the compromise matrix, we find the lattice gas and RVO2 models are similar in terms of the evacuation time, passage density, and flow rates, whereas the social force and RVO2 models are similar in terms of the total distance traveled. Most importantly, we find that the zoned evacuation times of the three models to be very different from each other. Thus we propose to use this variable, if it can be measured, as the key test between different models, and also between models and the real world. Finally, we compared the model flow rates against the flow rate of an emergency evacuation during the May 2008 Sichuan earthquake, and found the social force model agrees best with this real data.     

A miniaturized and integrated gel post platform for multiparameter PCR detection of herpes simplex viruses from raw genital swabs

Herpes simplex virus (HSV) is one of the most prevalent viruses, with acute and recurrent infections in humans. The current gold standard for the diagnosis of HSV is viral culture which takes 2-14 days and has low sensitivity. In contrast, DNA amplification by polymerase chain reaction (PCR) can be performed within 1-2 h. We here describe a multiparameter PCR assay to simultaneously detect HSV-1 and HSV-2 DNA templates, together with integrated positive and negative controls, with product detection by melting curve analysis (MCA), in an array of semi-solid polyacrylamide gel posts. Each gel post is 0.67 μL in volume, and polymerized with all the components required for PCR. Both PCR and MCA can currently be performed in one hour and 20 min. Unprocessed genital swabs collected in universal transport medium were directly added to the reagents before or after polymerization, diffusing from atop the gel posts. The gel post platform detects HSV templates in as little as 2.5 nL of raw sample. In this study, 45 genital swab specimens were tested blindly as a preliminary validation of this platform. The concordance of PCR on gel posts with conventional PCR was 91%. The primer sequestration method introduced here (wherein different primers are placed in different sets of posts) enables the simultaneous detection of multiple pathogens for the same sample, together with positive and negative controls, on a single chip. This platform accepts unprocessed samples and is readily adaptable to detection of multiple different pathogens or biomarkers for point-of-care diagnostics.     

Syntheses of water-soluble octahedral, truncated octahedral, and cubic Pt-Ni nanocrystals and their structure-activity study in model hydrogenation reactions

We developed a facile strategy to synthesize a series of water-soluble Pt, Pt(x)Ni(1-x) (0 < x < 1), and Ni nanocrystals. The octahedral, truncated octahedral, and cubic shapes were uniformly controlled by varying crystal growth inhibition agents such as benzoic acid, aniline, and carbon monoxide. The compositions of the Pt(x)Ni(1-x) nanocrystals were effectively controlled by choice of ratios between the Pt and Ni precursors. In a preliminary study to probe their structure-activity dependence, we found that the shapes, compositions, and capping agents strongly influence the catalyst performances in three model heterogeneous hydrogenation reactions.     

Preferential surface oxidation of Gd in Gd5Ge4

Gd oxidizes preferentially at the (0 1 0) surface of Gd₅Ge₄. This is consistent with thermodynamic data for the bulk oxides. Upon oxidation in vacuum, the gadolinium oxide displaces or covers the Ge. Oxidation is more extensive at 600 K than at 300 K, because more oxygen is incorporated into the surface and the shift of the Gd binding energy is larger.     

Chromatographic analyses of tocopherols and tocotrienols in palm oil

Analyses of tocols (tocopherols and tocotrienols) in palm oil have been extensively reported in the past. However, due to the scarcity of individual tocotrienol standards, calibrations have mostly been carried out using only α-tocopherol as standard. Moreover, even if the individual tocotrienols are being used, their reliability is often questioned, because tocotrienols are highly susceptible to oxidation and deterioration. This paper reports on the study of the deterioration rate of individual tocotrienol standards upon storage as well as different calibration methods for the tocols in palm oil.     

聚氨酯与铁电陶瓷粉复合物的电致感应性能研究

利用双辊制备了一系列热塑性弹性体聚氨酯（PU）和铁电钛酸锆酸铅盐（PZT）的电感应PZT／PU复合物。X－衍射和SE镜结果显示,复合物中,在铁电相中PZT陶瓷粉呈现结晶态并且均匀分布在PU基体中,复合物的弹性模量和相对电容率随着复合物中PZT体积分数增加而升高,在高压电场下,低PZT含量的复合物呈现负的电致伸缩应力,当PZT体积分数增加到6％以上时,在某个临界电场下,复合物呈现出电致伸缩应力反转的特性,即电致伸缩应力从负转变为正,并且发生应力反转的临界电场随着复合物中PZT体积分数的增加而降低,PU的电致伸缩特性与PZT在高电场下极化反转效应结合,导致了PZT／PU复合物这种有趣的性能,因此PZT／PU复合物将在高电压场方面作为传感器开关材料得到广泛应用。     

Palladium-catalyzed chemoselective direct α-arylation of carbonyl compounds with chloroaryl triflates at the C–Cl site

This study described palladium-catalyzed chemoselective direct α-arylation of carbonyl compounds with chloroaryl triflates in the Ar–Cl bond. The Pd/SelectPhos system showed excellent chemoselectivity toward the Ar–Cl bond in the presence of the Ar–OTf bond with a broad substrate scope and excellent product yields. The electronic and steric hindrance offered by the –PR₂ group of the ligand with the C2-alkyl group was found to be the key factor affecting the reactivity and chemoselectivity of the α-arylation reaction. The chemodivergent approach was also successfully employed in the synthesis of flurbiprofen and its derivatives (e.g., –OMe and –F).

Palladium-catalyzed chemoselective direct α-arylation of carbonyl compounds with chloroaryl triflates in the Ar–Cl bond is reported. The effects of –PR₂ and C2-alkyl groups of the ligands are investigated using experimental and computational methods.