Interactions between a nonionic gemini surfactant and cyclodextrins investigated by small-angle neutron scattering

The microstructure of complexes between hydroxypropyl-cyclodextrins (HPCDs) (alpha, beta, and gamma) and a novel gemini surfactant has been investigated by small-angle neutron scattering (SANS). This nonionic hetero-gemini surfactant (denoted NIHG750) contains two hydrophobic groups and two hydrophilic groups. One is a methyl-capped polyoxyethylene chain with 16 oxyethylene units and the other is a secondary hydroxyl group. Various form factor models have been considered for fitting the SANS data. Spherical aggregates (25 to 40 A) with a size slightly larger than that of NIHG750 micelles (about 23 A) appear in mixed systems. These could be micellar aggregates partly covered with a few cyclodextrin molecules. In addition, the results indicate rod formation (r approximately 8 A, L approximately 70 A) for the NIHG-HPCD complexes. This result is consistent with the threading of HPCDs onto NIHG750 to such an extent that the surfactant molecule takes an extended conformation at high levels of HPCD. Also, the results indicate that HPCDs may interact with the oxyethylene groups of the spherical micellar aggregates leading to an increase in micelle size and a gradual transformation to rod-shaped aggregates. The tendency to form rods increases in the order gamma-CD相似文献   

Calculation of cross sections for positron-Ar collisions

The three-body classical trajectory Monte-Carlo (CTMC) method is used to investigate positron-argon atom collisions. The total ionization cross sections are presented along with singly and doubly differential cross sections. The existence of the cusp-like peak in the triply differential electron and positron spectra at positron impact is predicted.     

Salting-in of alcohols in aqueous solutions by tetraalkylammonium bromides at the freezing temperature

The freezing-point depression of the ternary systems tetraalkylammonium bromides-t-butanol-water for the first five homologs of R₄NBr was measured. In the case of Bu₄NBr, the effect of size of the alcohol (methahol ton-butanol) was also investigated. From the corresponding freezing-point data for the binary systems the apparent salting constants were calculated. The true salting constantsk _s were obtained by extrapolation to infinite dilution. These are all very close to zero at the freezing temperature. From the corresponding thermochemical data the temperature dependence ofk _s was calculated, and above 5°C all the R₄NBr salts int-butanol; the salting-in increases with temperature and with the size of the hydrophobic cations. The scaled-particle theory is at present the only one which can account semiquantitatively for the temperature dependence of the salting-in effect. On leave of absence from Chemistry Department, The University, Sheffield S3 7HF, England To whom correspondence should be addressed.     

Thermolyse des β-énaminodiesters cycliques: Accès à divers β-énaminoesters, β-énaminothioesters et β-enaminoamides.

A new synthesis of β-enaminoesters, β-enaminothioesters et β-enaminoamides by thermic decomposition of β-enaminodiesters is described.     

Derivative spectrophotometric resolution of mixtures of the food colourants Tartrazine, Amaranth and Curcumin in a micellar medium

A study of the absorption spectra of the food colourants Tartrazine (E-102), Amaranth (E-123) and Curcumin (E-100) in various organic solvents and pH media, have been carried out. In addition, the spectral behaviour in aqueous micellar systems of anionic, cationic and non-ionic surfactants, as well as beta-cyclodextrin, was investigated. Analytical methods are proposed for the determination of the three dyes in mixtures without any prior separation step, by the application of the derivative technique to the normal absorption spectra, based on the use of cetyltrimethylammonium bromide (CTAB) in 0.1 M NaOH, over the concentration range 2-50 mug ml(-1). The methods are applied for determining the three dyes in commercial food products.     

Thermodynamic properties of alkali halides. IV. Apparent molal volumes,expansibilities, compressibilities,and heat capacities in urea-water mixtures

The apparent molal volume φ_v, expansibility φ_E, compressibility φ_K, and heat capacity φ_c of NaCl were measured in urea-water mixtures, as a function of salt (<1.5m) and urea (<13m) concentrations at 25°C. At a fixed urea concentration, the transfer functions from H₂O to 3m urea are linear functions of the NaCl aquamolality. At a fixed salt aquamolality, (0.1m), the sign of the transfer functions is in the direction of a decrease in the structure-breaking effect, and the absolute values of the transfer functions tend to level off at high urea concentrations (13m). The functions φ_v, φ_E, φ_K, φ_c, and (?φ_v/?T)_p were measured for the sodium halides and alkali, bromides (chlorides in the case of φ_K) at a fixed salt aquamolality of 0.1m and fixed urea molality of 3m. The corresponding transfer functions from H₂O to 3m urea are opposite those from H₂O to D₂O and similarly are relatively independent of ionic size. This suggests that urea, shows no specific interaction affinity for ions and that the overall number of water molecules influenced by the ions is relatively constant for all alkali halides. The lithium halides are an exception in that Li⁺ seems to have hardly any structure-breaking effect.     

Synthesis and acid-base properties of (1H-benzimidazol-2-yl-methyl)phosphonate (Bimp2-). Evidence for intramolecular hydrogen-bond formation in aqueous solution between (N-1)H and the phosphonate group

The synthesis of (1H-benzimidazol-2-yl-methyl)phosphonic acid, H2(Bimp)+/-, is described: 2-chloromethylbenzimidazole was reacted with ethylchloroformate to give 1-carboethoxy-2-chloromethylbenzimidazole which was treated with trimethyl phosphite and after hydrolysis with aqueous HBr H2(Bimp)+/- was obtained. In H2(Bimp)+/- one proton is at the N-3 site and the other at the phosphonate group; both acidity constants were determined in aqueous solution by potentiometric pH titrations (25 degrees C; I = 0.1 M, NaNO3) and this furnished the pKa values of 5.37 +/- 0.02 and 7.41 +/- 0.02, respectively. The acidity constant for the release of the primary proton from the P(O)(OH)2 group of H3(Bimp)+ was estimated: pKa = 1.5 +/- 0.2. Moreover, Bimp2- can be further deprotonated at its neutral (N-1/N-3)H site to give the benzimidazolate residue, but this reaction occurs only in strongly alkaline solution (KOH); application of the H_ scale developed by G. Yagil (J. Phys. Chem., 1967, 71, 1034) together with UV spectrophotometric measurements gave pKa = 14.65 +/- 0.12. Comparisons with acidity constants taken from the literature show that this latter pKa value is far too large and this allows the conclusion that an intramolecular hydrogen bond is formed between the (N-1/N-3)H site and the phosphonate group of Bimp2-; the formation degree of this hydrogen-bonded isomer is estimated to be 98 +/- 2%. The general relevance of this and the other results are shortly discussed and the species distribution for the Bimp system in dependence on pH is provided.     

The relative influences of acidity and polarity on responsiveness of small organic molecules to analysis with negative ion electrospray ionization mass spectrometry (ESI-MS)

The purpose of the work presented here was to evaluate the influence of solution composition and analyte characteristics on responsiveness to analysis with negative ion electrospray ionization mass spectrometry. The responses of a series of structurally diverse acidic molecules were compared in various solvents. Response was generally observed to be higher in methanol than acetonitrile and response for all analytes was poorer when water was mixed with the organic solvent. A positive correlation between negative ion ESI-MS response and log P was observed when either acetonitrile or methanol was used as the electrospray solvent. This result was expected because analytes with significant nonpolar character should be particularly responsive to ESI-MS analysis due to their higher affinity for electrospray droplet surfaces. It was also predicted that highly acidic analytes would be most responsive to analysis with negative ion ESI-MS due to their tendency to form negative ions. However, for the analytes studied here, acidity was found not to have a consistent influence on ESI-MS response. Many of the highly acidic molecules were quite polar and, consequently, were poorly responsive. Furthermore, the deprotonated molecular ion was detected for a number of molecules with very high pKa values, which would not be expected to form negative ions in the bulk solution. Ultimately, these results indicate that acidity is not a conclusive parameter for prediction of the relative magnitudes of negative ion ESI-MS response among a diverse series of analytes. Analyte polarity does; however, appear to be useful for this purpose.     

The role of additional solvents in transition metal complex catalyzed asymmetric reductions in ionic liquid containing systems

When ionic liquids (ILs) are employed as solvents for transition metal complex (TMC) catalyzed reductions, a second solvent can be added to increase the efficiency of the catalytic cycle and the solubility of the reactant in the IL phase. Two industrially relevant asymmetric hydrogenations, the enantioselective reductions of methyl 2-acetamidoacrylate with Rh-EtDuPHOS and methyl acetoacetate with Ru-BINAP, were performed in different catalytic systems including 1-butyl-3-methylimidazolium hexafluorophosphate/ tetrafluoroborate as ILs. Product separation and TMC recycling was performed by extracting the product from the reaction mixture. This can be accomplished by cooling the system, by adding an excess of the second solvent or by adding a third solvent. A high solubility of the second solvent in the IL catalytic phase favors the reaction activity, but can induce leaching of the IL and TMC.     

Arsenite oxidation and arsenate determination by the molybdene blue method

Based on the similarity in properties of arsenate and phosphate, the colorimetric method using the molybdene blue complex was tested in order to determine low As(V) concentration in waters. The influence of complex formation time, daylight, temperature and competitive anions (silicate and sulphate) upon complex formation was determined. Optimal complex formation was reached in 1 h at 20±1 °C and was slightly favoured when developed in daylight. The formation rate declined with decreasing reaction temperature and no influence of any of the competitive anions tested (at concentrations usually found in natural waters of granitic areas) was noted. The detection limit of this method was 20 μg As(V) l⁻¹. This simple, fast and sensitive arsenic determination method is suitable for field analysis, especially for waters containing low levels of phosphate and organic matter. Through arsenate determination, this colorimetric method allowed the arsenite oxidation efficiency of five common industrial oxidants to be compared. H₂O₂ and MnO_2(s) were not considered as effective oxidants as a high excess was necessary to ensure As(III) oxidation. NaOCl and KMnO₄ were promising oxidants as they allowed complete arsenite oxidation with a small excess for NaOCl or even less than the electron stoichiometric ratio in the case of KMnO₄. FeCl₃ was the most effective oxidant among the reagents tested here.