Carboxylate-substituted radicals from phenylselenide derivatives. Designs on models for coenzyme B12-dependent enzyme-catalyzed rearrangements

Laser flash photolysis (266 nm) of alpha- and beta-phenylselenyl esters, carboxylic acids, and carboxylates in aqueous acetonitrile media gave the corresponding radicals by homolytic cleavage of the phenylselenyl groups. In the beta-substituted systems, acid and carboxylate radicals reacted in intramolecular reporter reactions with approximately equal rate constants. For the alpha-substituted systems, an ester- and carboxylic acid-substituted radical reacted in an intramolecular reporter reaction with the same rate constants, but the analogous alpha-carboxylate radical, a radical anion, reacted an order of magnitude less rapidly and with an activation energy that is 3 kcal/mol greater than that found for analogues. A kinetic titration of the equilibrating alpha-acid and alpha-carboxylate radicals gave pKa = 4.6. The results indicate that alpha-ester and alpha-carboxylic acid radicals are unlikely to be appropriate models for alpha-carboxylate radicals, the intermediates formed in a large subset of coenzyme B12-dependent enzyme-catalyzed reactions.     

Effects of substituted ligands on the mobility of complexed anions

From conductance and viscosities measurements on Pr₄NCl, Et₄NBr, and AgNO₃ in acetonitrile and Et₃NBr in nitrobenzene, the Walden products of the anion at infinite dilution were determined in presence of various concentrations of substituted benzoic acids. From these data it was possible to compute the values of the Walden products of the once complexed anions and to estimate the order of magnitude of the Walden products of twice complexed anions. Stokes' law is not obeyed, and the Walden products are not proportional to the third root of the molar volume of the complexed ions, as a consequence of their lack of sphericity. The assumption that the drag force which acts on the ions is proportional to the volume of the substituents results in a linear expression between the reciprocals of the Walden products and the molar volume of the ligands. The experimental results fit this expression within the limits of the experimental errors, and the slopes of the lines are nearly the same for all the anions and for the two solvents studied here, namely, 2.5×10^–4 ohm-cm^–5 mole-cP^–1.     

On the existence of thermodynamics for the random energy model

Derrida's random energy model is considered. Almost sure andL ^P convergence of the free energy at any inverse temperature are proven. Rigorous upper and lower bounds to the finite size corrections to the free energy are given.     

Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.     

Molecules organiques coordinees a un metal. : Nouveaux complexes olefiniques d'α-enones par le fer(0)

Heterodienetricarbonyliron complexes react with ligands ( L = PMe₂Ph, P(OMe)₃ or P(OPh)₃) to give the adducts (enone)Fe(CO)₃L with the ethylenic double bond coordinated only to the iron(0). Electron-releasing and low-steric effects of L make the reaction which is specific for enones easier compared to that for dienes. PMe₂Ph allows enone exchange and P(OPh)₃ promotes carbonyl elimination. Ligand influence is shown by infrared spectroscopy and by the shielding of ethylenic protons in NMR spectroscopy.     

Surface and porosity of nanocrystalline boehmite xerogels

Boehmite xerogels are prepared by hydrolysis of Al(OC4H9)3 followed by peptization with HNO3 (H+/Al = 0, 0.07, 0.2). XRD and TEM show that these gels are made of nanosized crystals (5-9 nm in width and 3 nm thick). According to the amount of acid, no significant differences are found in size and shape, but only in the spatial arrangement of the crystallites. Nitrogen adsorption-desorption isotherms of nonpeptized gels are of type IV, whereas isotherms of peptized gels are of type I. These isotherms are analyzed by the t-plot method. The majority of pore volume results from intercrystalline mesopores, but the peptized gels also contain intercrystalline micropores. The particle packing is very dense for the gel peptized with H+/Al = 0.2 (porosity = 0.26), but it is less dense in non-peptized gel (porosity = 0.44). Heating these gels under vacuum creates, from 250 degrees C onwards, an intracrystalline microporosity resulting from the conversion of boehmite into transition alumina. But heating also causes intercrystalline micropores collapsing. The specific surface area increases up to a limit temperature (300 degrees C for nonpeptized gels and 400 degrees C for peptized) beyond which sintering of the particles begins and the surface decreases. The PSD are calculated assuming a cylindrical pore geometry and using the corrected Kelvin equation proposed by Kruk et al. Peptized xerogels give a monomodal distribution with a maximum near 2 nm and no pores are larger than 6 nm. Nonpeptized gels have a bimodal distribution with a narrow peak near to 2 nm and a broad unsymmetrical peak with a maximum at 4 nm. Heating in air above 400 degrees C has a strong effect on the porosity. As the temperature increases, there is a broadening of the distribution and a marked decrease of small pores (below 3 nm). However, even after treatment at 800 degrees C, micropores are still present.     

Methodology for the calculation of the potential of mean force for a cation-pi complex in water.

We report potential of mean force (PMF) calculations on the interaction between the p-sulfonatocalix[4]arene and a monovalent cation (Cs(+)). It has been recently shown from microcalorimetry and (133)Cs NMR experiments that the association with Cs(+) is governed by favourable cation-pi interactions and is characterized by the insertion of the cation into the cavity of the macrocycle. We show that the PMF calculation based upon a classical model is not able to reproduce both the thermodynamic properties of association and the insertion of the cation. In order to take into account the different contributions of the cation-pi interactions, we develop a new methodology consisting of changing the standard PMF by an additional contribution resulting from quantum calculations. The calculated thermodynamic properties of association are thus in line with the microcalorimetry and (133)Cs NMR experiments and the structure of the complex at the Gibbs free-energy minimum shows the insertion of the cation into the cavity of the calixarene.     

Efficient and Highly Selective Oxidation of Primary Alcohols to Aldehydes by N-Chlorosuccinimide Mediated by Oxoammonium Salts

2,2,6,6-Tetramethyl-1-piperidinyloxy catalyzes efficient oxidation of primary alcohols to aldehydes by N-chlorosuccinimide, in a biphasic dichloromethane-aqueous pH 8.6 buffer system in the presence of tetrabutylammonium chloride. Aliphatic, benzylic, and allylic alcohols are readily oxidized with no overoxidation to carboxylic acids. Secondary alcohols are oxidized to ketones with a much lower efficiency. Very high chemoselectivities are observed when primary alcohols are oxidized in the presence of secondary ones. Primary-secondary diols are selectively transformed into hydroxy aldehydes, with, in some cases, no detectable formation of the isomeric keto alcohols.     

Phénylhalogénohydrodigermanes

The symmetric and unsymmetric phenylchlorohydrodigermanes can be isolated or characterized via partial halogenation of the Ge? H bonds of the symmetrical phenylhydrodigermanes Ph₂(H)GeGe(H)₂Ph, Ph(H)₂GeGe(H)₂Ph by chloromethyl methyl ether and carbontetrachloride. Some of these phenylchlorohydrodigermanes are formed by insertion of phenylchlorogermylene (PhGeCl) on the Ge? H or Ge? Cl bonds of the phenylchlorohydrogermanes. The hydrolysis of the monochloro phenylhydrodigermanes Ph₂(Cl)GeGe(H)₂ and Ph(Cl)(H)GeGe(H)₂Ph leads to the phenyl phenylhydrogermyl digermoxanes [Ph₂(H)GeGePh₂]₂O and [Ph(H)₂GeGe(H)Ph]₂O. Treatment of these oxides with the concentrated aqueous solutions of hydracides leads to the monofluorinated, brominated and iodinated phenylhydrodigermanes Ph₂(H)GeGe(X)Ph₂ and Ph(H)₂GeGe(H)(X)Ph (X) = F, Br, I). Phenylchlorohydrodigermanes decompose thermally by α-elimination on one germanium atom with formation of germylene and phenylchlorohydrogermane. The physico-chemical IR. and NMR. study of these phenylhalogenohydrodigermanes indicates that, if the vGe? H frequency variations are mostly linked to the inductive effects of the substituents on the same germanium, the variations of the chemical shifts of the Ge? H protons seem to be due to many factors and especially to the inductive effect of the substituents on the germanium and the magnetic anisotropy of the Ge? X bonds.     

Triplex and quadruplex DNA structures studied by electrospray mass spectrometry

DNA triplex and quadruplex structures have been successfully detected by electrospray ionization mass spectrometry (ESI-MS). Circular dichroism and UV-melting experiments show that these structures are stable in 150 mM ammonium acetate at pH 7 for the quadruplexes and pH 5.5 for the triplexes. The studied quadruplexes were the tetramer [d(TGGGGT)](4), the dimer [d(GGGGTTTTGGGG)](2), and the intramolecular folded strand dGGG(TTAGGG)(3), which is an analog of the human telomeric sequence. The absence of sodium contamination allowed demonstration of the specific inclusion of n - 1 ammonium cations in the quadruplex structures, where n is the number of consecutive G-tetrads. We also detected the complexes between the quadruplexes and the quadruplex-specific drug mesoporphyrin IX. MS/MS spectra of [d(TGGGGT)](4) and the complex with the drug are also reported. As the drug does not displace the ammonium cations, one can conclude that the drug binds at the exterior of the tetrads, and not between them. For the triplex structure the ESI-MS spectra show the detection of the specific triplex, at m/z values typically higher than those typically observed for duplex species. Upon MS/MS the antigene strand, which is bound into the major groove of the duplex, separates from the triplex. This is the same dissociation pathway as in solution. To our knowledge this is the first report of a triplex DNA structure by electrospray mass spectrometry.