Structurally Simple Osmium(II) Polypyridyl Complexes as Photosensitizers for Photodynamic Therapy in the Near Infrared**

Five osmium(II) polypyridyl complexes of the general formula [Os(4,7-diphenyl-1,10-phenanthroline)₂ L ]²⁺ were synthesized as photosensitizers for photodynamic therapy by varying the nature of the ligand L . Thanks to the pronounced π-extended structure of the ligands and the heavy atom effect provided by the osmium center, these complexes exhibit a high absorption in the near-infrared (NIR) region (up to 740 nm), unlike related ruthenium complexes. This led to a promising phototoxicity in vitro against cancer cells cultured as 2D cell layers but also in multicellular tumor spheroids upon irradiation at 740 nm. The complex [Os(4,7-diphenyl-1,10-phenanthroline)₂(2,2′-bipyridine)]²⁺ was found to be the most efficient against various cancer cell lines, with high phototoxicity indexes. Experiments on CT26 tumor-bearing BALB/c mice also indicate that the Os^II complexes could significantly reduce tumor growth following 740 nm laser irradiation. The high phototoxicity in the biological window of this structurally simple complex makes it a promising photosensitizer for cancer treatment.     

Enhancement of protein sensitivity for MALDI imaging mass spectrometry after chemical treatment of tissue sections

MALDI imaging mass spectrometry (IMS) has become a valuable tool for the investigation of the content and distribution of molecular species in tissue specimens. Numerous methodological improvements have been made to optimize tissue section preparation and matrix deposition protocols, as well as MS data acquisition and processing. In particular for proteomic analyses, washing the tissue sections before matrix deposition has proven useful to improve spectral qualities by increasing ion yields and the number of signals observed. We systematically explore here the effects of several solvent combinations for washing tissue sections. To minimize experimental variability, all of the measurements were performed on serial sections cut from a single mouse liver tissue block. Several other key steps of the process such as matrix deposition and MS data acquisition and processing have also been automated or standardized. To assess efficacy, after each washing procedure the total ion current and number of peaks were counted from the resulting protein profiles. These results were correlated to on-tissue measurements obtained for lipids. Using similar approaches, several selected washing procedures were also tested for their ability to extend the lifetime as well as revive previously cut tissue sections. The effects of these washes on automated matrix deposition and crystallization behavior as well as their ability to preserve tissue histology were also studied. Finally, in a full-scale IMS study, these washing procedures were tested on a human renal cell carcinoma biopsy.     

Transferable specific scaling factors for interpretation of infrared spectra of biomolecules from density functional theory

A set of transferable local scaling factors is established for assignment of infrared spectra of molecular systems of biological interest experimentally recorded under gas-phase conditions. Each scaling factor is specific for an experimentally observable vibrational mode chosen among those bringing significant structural information. Those factors are provided for harmonic calculations at the DFT B3LYP and DFT B3PW91 levels respectively with 7 and 2 different basis sets. The used training set of neutral molecules comprises nucleobases, aminoacids, peptides, sugars, and neurotransmitters. The proposed specific scaling factors usable for unambiguous conformer assignments lead to typical prediction errors ca. 10 cm(-1) for free and moderately hydrogen-bonded group frequencies with red-shifts up to 200 cm(-1).     

Revisiting the determination of langmuir parameters--application to tetrahydrothiophene adsorption onto activated carbon

The selection of a proper sorbent for a given application is a complex problem. The design and efficiency of adsorption processes require an equilibrium adsorption model. Linear transformation is one of the methods available to estimate the adjustable parameters of isotherm models but possesses limitations compared to nonlinear regressions. A different approach to calculate predicted equilibrium isotherm values leading to an alternative nonlinear regression is presented in this paper and compared with usual regression methods. Adsorption isotherm data of gaseous THT onto three activated carbon materials constitute an experimental basis for the discussion. Assessment of the goodness-of-fit of the Langmuir model is supported by different selected test functions. The new nonlinear approach did not obtain the best results for each test function, but raises questions about the inherent combined error in regression procedures.     

Swelling and contraction of ferrocyanide-containing polyelectrolyte multilayers upon application of an electric potential

We developed a new platform at the interface of polyelectrolyte multilayers (PEMs) and electroactive polymers (EAPs) by combining the easy buildup of PEM thin films and the deformation characteristics of the EAPs. The PEM films were made of poly(L-glutamic acid) (PGA) and poly(allylamine hydrochloride) (PAH). After [Fe(CN)6]4- ions (FCIV) were added, cyclic voltammetry (CV) was performed, resulting in a reversible expansion and contraction of the film. The shape change as well as the film buildup prior to the cycling were monitored in situ using the electrochemical quartz crystal microbalance with dissipation monitoring (EC-QCM-D). Electrochemical atomic force microscopy (EC-AFM) images confirmed the rapid shape deformation. The process takes place in an aqueous environment under mild conditions (maximum potential of 600 mV and no pH change), which makes it a promising tool for biomedical applications. In addition, the electrochemically active films are produced using the layer-by-layer (LbL) method that is already established in biotechnology and biomaterials science; therefore, the presented approach can be readily adapted in these areas, bringing about a new possibility for the nanoscale dynamic control of coating thickness in various applications.     

Toposelective electrochemical desorption of thiol SAMs from neighboring polycrystalline gold surfaces

We describe a method for the selective desorption of thiol self-assembled monolayers from gold surfaces having micrometer-scale separations on a substrate. In an electrolyte solution, the electrical resistance between the adjacent areas can be much lower than the resistance between a surface and the counter electrode. Also, both reductive and oxidative thiol desorption may occur. Therefore, the potentials of the surfaces must be independently controlled with a multichannel potentiostat and operating windows for a given thiol/electrolyte system must be established. In this study operating windows were established for 1-dodecanethiol-based SAMs in phosphate buffer, phosphate-buffered saline, and sodium hydroxide solution, and selective SAM removal was successfully performed in a four-electrode configuration.     

Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

Further conventions for NMR shielding and chemical shifts (IUPAC Recommendations 2008)

IUPAC has published a number of recommendations regarding the reporting of nuclear magnetic resonance (NMR) data, especially chemical shifts. The most recent publication [Pure Appl. Chem. 73, 1795 (2001)] recommended that tetramethylsilane (TMS) serve as a universal reference for reporting the shifts of all nuclides, but it deferred recommendations for several aspects of this subject. This document first examines the extent to which the (1)H shielding in TMS itself is subject to change by variation in temperature, concentration, and solvent. On the basis of recently published results, it has been established that the shielding of TMS in solution [along with that of sodium-3-(trimethylsilyl)propanesulfonate, DSS, often used as a reference for aqueous solutions] varies only slightly with temperature but is subject to solvent perturbations of a few tenths of a part per million (ppm). Recommendations are given for reporting chemical shifts under most routine experimental conditions and for quantifying effects of temperature and solvent variation, including the use of magnetic susceptibility corrections and of magic-angle spinning (MAS). This document provides the first IUPAC recommendations for referencing and reporting chemical shifts in solids, based on high-resolution MAS studies. Procedures are given for relating (13)C NMR chemical shifts in solids to the scales used for high-resolution studies in the liquid phase. The notation and terminology used for describing chemical shift and shielding tensors in solids are reviewed in some detail, and recommendations are given for best practice.     

Statistical quantification of the influence of material properties on the oxidation and ignition of activated carbons

The influence of material properties on the reactivities of activated carbon materials have been studied on a laboratory scale. Carbon samples having diversified origin and properties were characterized using a thermogravimetry (TG) coupled with a differential scanning calorimetry (DSC). Reactivity parameters like the Point of Initial Oxidation (PIO) representing the beginning of the oxidation reactions and the Spontaneous Ignition Temperature (SIT) where the bed combustion takes place in a self sustaining manner were experimentally determined. The intrinsic properties of the activated carbons influencing oxidation and ignition were examined qualitatively followed by quantitative statistical correlations. Results from both qualitative and statistical correlations showed that increase in the oxygen content in the form of surface oxygenated groups increased the reactivity of activated carbons. It was by far the single most influential property discriminated from the analysis. The porosity characteristics like the specific surface area and pore volume did show some vague trends but could not be validated like that of the oxygen content. The effects of these individual properties on the oxidation and ignition reactivity are discussed.     

Sensing the chirality of Dawson lanthanide polyoxometalates [alpha1-LnP2W17O61]7- by multinuclear NMR spectroscopy

Lanthanide complexes of the chiral Dawson phosphotungstate [alpha(1)-P(2)W(17)O(61)](10-) were used to study the formation of diastereomers with optically pure organic ligands. The present work started with the full assignment of the (183)W NMR spectra of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) at different temperatures and concentrations, which allowed the structure of the dimerized form in aqueous solution to be established. Different enantiopure amino acids and phosphonic acids were screened as ligands. Both types allowed chiral differentiation by multinuclear NMR spectroscopy under fast-exchange conditions. Functional groups with a good affinity for the oxo framework of the polyoxometalate were identified, and maps of the interactions between L-serine and N-phosphonomethyl-L-proline with [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-) were established. This demonstrates the power of (183)W NMR spectroscopy to elucidate the molecular recognition of inorganic molecules by organic compounds. N-Phosphonomethyl-L-proline appears to be a convenient ligand to promote separation of the diastereomers and ultimately resolution of the enantiomers of [alpha(1)-Yb(H(2)O)(4)P(2)W(17)O(61)](7-).