Controlling the self-assembly of a deoxiguaninosine on mica

We report a tapping mode scanning force microscopy investigation on the growth from solutions of a lipophilic deoxiguanosine derivative on the basal plane of a muscovite mica surface. By varying the chemical composition of the substrate surface it is possible to drive the self-assembly towards either layered thin films, which are very likely to consist of guanosine quartets, or nanoribbons, comprising hydrogen bonded networks. Both these two architectures, which are peculiar to the guanine base itself, are of notable importance for the fabrication of molecular nanowires. Moreover, the first arrangement provides evidence that the guanosine is able to behave as ionophore, thus, suggesting its utilization in the development of solid-state ion selective sensors.     

Investigation of anthropic effects connected with metal ions concentration, organic matter and grain size in Bormida river sediments

An investigation on the sediment composition and grain size was carried out along the Bormida river (Piedmont, Northern Italy). The samples were taken both in the riverbed and on its banks. Multivariate statistical exploratory methods permitted to identify possible sources of primary pollution. In particular, principal component analysis (PCA) showed that there are probably at least three anthropogenic main causes of pollution, one connected with Cr, Ni and Sn, the second with cadmium and the last one with mercury. Some correlations were found between heavy metal ion concentrations and organic matter and/or the sediment grain size. Differences between the samples collected in the riverbed and on the banks were identified and the relationships between the principal components and the distance of the samples from the riverbed and from the hot spot represented by the ACNA industrial site were also analyzed.     

Attempts at new synthesis of 5,11 -Dihydro-6H-pyrido[2,3-b][1,4]benzodiazepin-6-one

Attempting some new approaches to 5,11-dihyro-6H-pyrido[2,3-b][1,4]benzodiazepin-6-one ( 6 ), compounds 8, 10 and 11 were prepared. Ring enlargement of 4 into 6 failed, as well as condensation of 10 and 11 into ID, which is the potential precursor of pirenzepin (11-[2′-(4″-methylpiperazin-1″-yl)]acetyl derivative of 6 ) via an envisaged intramolecular Diels-Alder reaction. Model compounds 5 and 13 were prepared and their behaviour in analogous reactions explained the failures of the intended transformations of 4 , as well as of condensation of 10 and 11 .     

Dielectric Shielding of Ionic Charges in Aqueous Solutions of Different Ionic Strength

The thermodynamic functions of the proton transfer H₂tn²⁺+tn → 2 Htn⁺ (tn = 1,3-diaminopropane) have been determined in aqueous solutions containing different amounts of KCl (0.05 ? μ ? 3.01). The free energy (?ΔG) of the process decreases, whereas the enthalpy (-ΔH) increases with μ. There is reason to believe that the reaction is entirely controlled by the Coulomb forces between the two protonic charges. The electrostatic energy involved can be described in terms of a model incorporating an effective dielectric constant εe, such that δε_e/δμ and δ²ε_e/δμδT are both positive. The polarisation of pure water is produced by orientation of hydrogen-bonded dipole molecules H₂O, whereas the electrolyte solution is polarised in addition by dislocation of the ions K⁺ and Cl^?. Our results demonstrate that the former type of polarisation is much more temperature dependent than the latter.     

Reactivity of 2-methyl-4-(1-pyrrolidinyl)-2H-1,2-benzothiazine 1,1-dioxide towards p-toluenesulphonyl azide

The 2-methyl-2H-1,2-benzothiazin-4-(3H)-one 1,1 dioxide ( 2 ), obtained according to a new, one-pot method, is transformed into the pyrrolidino enamine 3 . Reaction of p-toluenesulphonyl azide with 3 gives, via an unstable triazoline adduct which loses nitrogen, the two isomeric tosylamino derivatives 4 and 5 . The structures have been assigned by exhaustive nmr analysis and some aspects on their formation and chemical behaviour are discussed.     

Inorganic coordination polymers. XIV. Chromium(III) phosphinate perfluorocarboxylate polymers

A series of polymers, {Cr(OH)(OPRR′O)[OOC(CF₂)_nCF(CF₃)₂]}_x has been prepared and studied. The polymers with R = R′ = C₆H₅ are soluble in CCl₂FCClF₂, whereas those with R = CH₃ and R′ = C₆H₅ and with R = R′ = C₈H₁₇ are insoluble in all solvents. Attempts to prepare similar materials without hydroxyl groups gave the polymers {Cr(OH)_r(OPRR′O)_p[OOC(CF₂)_nCF(CF₃)₂]_q}_x with 0 < r < 1. The latter polymers are much more tractable than the former; however they are also less thermally stable. The perfluoro-carboxylate groups in these materials can either be chelating or bridging, depending on the other ligands present.     

Study of ruthenium(II) complexes with anticancer drugs as ligands. Design of metal-based phototherapeutic agents

The reaction of trans-[RuCl(2)(PPh(3))(3)] (Ph = C(6)H(5)) with 2-thio-1,3-pyrimidine (HTPYM) and 6-thiopurines (TPs) produced mainly crystalline solids that consist of cis,cis,trans-[Ru(PPh(3))(2)(N,S-TPYM)(2)] (1) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-TPs)(2)]X(2) (X = Cl(-), CF(3)SO(3)(-)). In the case of TPs, other coordination isomers have never been isolated and reported. Instead, the mother liquor obtained after filtration of 1 produced red single crystals of trans,cis,cis-[Ru(PPh(3))(2)(N,S-TPYM)(2)].2H(3)O(+).2Cl(-) (2.2H(3)O(+).2Cl(-)). Selected ruthenium(II)-thiobase complexes were studied for their structural, reactivity, spectroscopic, redox, and cytotoxic properties. Single crystals of 1 contain thiopyrimidinato anions chelated to the metal center via N and S. The Ru[bond]N bonds are significantly elongated for 1 [2.122(2) and 2.167(2) A] with respect to 2 [2.063(3) A] because of the trans influence from PPh(3). The coordination pseudo-octahedron for 2 is significantly elongated at the apical sites (PPh(3) ligands). Solutions of cis,cis,trans isomers in air are stable for weeks, whereas those of 2 turn green within 24 h, in agreement with the respective redox potentials. cis,cis,trans- and trans,cis,cis-[Ru(PH(3))(2)(N,S-TPYM)(2)], as optimized through the DFT methods at the Becke3LYP level are in good agreement with experimental geometrical parameters (1 and 2), with cis,cis,trans being more stable than trans,cis,cis by 3.88 kcal. The trend is confirmed by molecular modeling based on semiempirical (ZINDO/1) and molecular mechanics (MM) methods. Cytotoxic activity measurements for cis,cis,trans-[Ru(PPh(3))(N-THZ)(N(7),S -H(2)TP)(2)]Cl(2) (4) (THZ = thiazole, H(2)TP = 6-thiopurine) and cis,cis,trans-[Ru(PPh(3))(2)(N(7),S-HTPR)2]Cl(2) (5) (HTPR = 6-thiopurine riboside) against ovarian cancer cells A2780/S gave IC(50) values of 17 +/- 1 and 29 +/- 9 microM, respectively. Furthermore, the spectral analysis of HTPYM, TPs, and their Ru(II) complexes in solution shows that intense absorptions occur in the UVA/vis region of light, whereas standard nucleobases absorb in the UVB region.     

Synthesis, properties and structures of the two “electron rich” cobalt-sulphur clusters [Co6(μ3-S)8(PEt3)6]

The reaction of hydrogen sulphide with [Co(H₂O)₆](BF₄)₂ and triethylphosphine in the presence of sodium tetraphenylborate or tetrabutylammonium hexafluorophosphate gave the paramagnetic clusters [Co₆(μ₃-S)₈(PEt₃)₆](Y) (Y = BPh₄, (1), PF₆, (2)). These compounds can be easily reduced by sodium napthalenide to the diamagnetic species [Co₆(μ₃-S)₈(PEt₃)₆] · 2C₄H₈O (3). The molecular structures of 1 and 3 have been established by single-crystal X-ray diffraction methods. Crystal data: (1) space group P , a = 19.481(9), b = 15.562(7), c = 12.390(b) Å, α = 92.70(8), β = 94.50(7), γ = 94.10(9)°, Z = 2, (3) space group R , a = 11.780(6) Å, α = 92.50(7)°, Z = 1. Both structures were solved by the heavy atom method and refined by full-matrix least-squares techniques to the conventional R factors values of 0.050 for 1 and 0.044 for 3 on the basis of 4251 and 1918 observed reflections, respectively. The two clusters [Co₆(μ₃-S)₈)(PEt₃)₆]^1+,0 are isostructural, the inner core consisting of an octahedron of cobalt atoms with all the faces symmetrically capped by triply bridging sulphur atoms. Each metal centre is additionally linked to a triethylphosphine group so that each cobalt atom is co-ordinated by four sulphur atoms and one phosphorus in a distorted square pyramidal environment. The addition of one electron whilst leaving unchanged the geometry of the inner framework, induces small changes in the structural parameters, the average Co---Co and Co---P distances being 2.794 (3) and 2.162 (2) Å for 1 and 2.817 (3) and 2.138 (2) Å for 3 respectively. Electrochemistry in non-aqueous solvents shows the electron-transfer sequence

Full-size image (3K)

The tricationic species is stable only in the short time of cyclic voltammetric tests.     

Cu(I) and Ag(I) complexes of chalcogenide derivatives of the organometallic ligand dppf and the dppa analogue

New Cu(I) and Ag(I) complexes were prepared by reaction of [M(NCCH₃)₄][X] (M = Cu or Ag; X = BF₄ or PF₆) with the bidentate chalcogenide ligands Ph₂P(E)NHP(E)Ph₂ (E = S, S₂dppa; E = Se, Se₂dppa), and dpspf (1,1′-bis(diphenylselenophosphoryl)ferrocene). Copper and silver behaved differently. While three molecules of either S₂dppa and Se₂dppa bind to a distorted tetrahedral Cu₄ cluster, with deprotonation of the ligand, 1:2 complexes of the neutral ligands are formed with Ag(I), with a tetrahedral coordination of the metal. The [Cu₄{Ph₂P(Se)NP(Se)Ph₂}₃]⁺ clusters assemble as dimers, held together by weak Se?Se distances interactions. Another dimer was observed for the [Ag(dpspf)]⁺ cation, with two short Ag?Se distances. DFT and MP2 calculations indicated the presence of attracting interactions, reflected in positive Mayer indices (MI). The electrochemistry study of this species showed that both oxidation and reduction took place at silver.     

Multireference perturbation CI I. Extrapolation procedures with CAS or selected zero-order spaces

We discuss the “three class” approximation to full multireference perturbation CI, which greatly reduces the computational effort by restricting the summation of diagrams to determinants belonging to a subspace of the zero-order space. In the framework of the CIPSI algorithm, we propose a new extrapolation procedure allowing recovery of the full “two class” results. The new procedure is applied to complete active spaces (CAS) and to individually selected zero-order spaces. Comparison with a full two class calculation on a CAS shows a reduction of computer time of one or two orders of magnitude in the tests presented here, with an accuracy in the order of 0.1 kcal/mol. Our procedure can thus compete with the CASPT2 algorithm, specifically conceived to deal with CAS. In the case of selected zero-order spaces, the speed-up is less dramatic but the method still retains its advantages. Received: 12 June 1997 / Accepted: 31 July 1997