New approach to molecular docking and its application to virtual screening of chemical databases

This paper describes the validation of a molecular docking method and its application to virtual database screening. The code flexibly docks ligand molecules into rigid receptor structures using a tabu search methodology driven by an empirically derived function for estimating the binding affinity of a protein-ligand complex. The docking method has been tested on 70 ligand-receptor complexes for which the experimental binding affinity and binding geometry are known. The lowest energy geometry produced by the docking protocol is within 2.0 A root mean square of the experimental binding mode for 79% of the complexes. The method has been applied to the problem of virtual database screening to identify known ligands for thrombin, factor Xa, and the estrogen receptor. A database of 10,000 randomly chosen "druglike" molecules has been docked into the three receptor structures. In each case known receptor ligands were included in the study. The results showed good separation between the predicted binding affinities of the known ligand set and the database subset.     

Determination of capsaicinoids in salsa by liquid chromatography and enzyme immunoassay

Two simple and rapid methods were developed to monitor pungency of salsa in production. Capsaicin (C) and dihydrocapsaicin (DHC) were quantitated in 17 commercially available tomato-based salsas by enzyme immunoassay (EIA) and liquid chromatography (LC) with fluorescent detection. Samples were extracted with methanol and the extracts were subjected to solid-phase extraction (SPE) using polystyrene-divinylbenzene columns. Analysis of SPE eluates showed good correlation (r2 = 0.953) between LC and EIA, with a slightly high bias for EIA. Salsa fortified with C and DHC from 0.118 to 103.2 microg/g resulted in recoveries of 90-112% (C) and 76-97% (DHC). Limits of detection by LC were 0.1 microg/g for each capsaicinoid and 0.1 microg/g by EIA for total capsaicinoids. The LC on-column response was linear from 0.2 to 100 ng for both C and DHC, whereas the working range for EIA was 0.1-2.0 ppm. Pungency varied between different salsa brands labeled mild, medium, and hot.     

Photoinduced electron transfer in a triad that can be assembled/disassembled by two different external inputs. Toward molecular-level electrical extension cables

We have designed, synthesized, and investigated a self-assembling supramolecular system which mimics, at a molecular level, the function performed by a macroscopic electrical extension cable. The system is made up of three components, 12+, 2-H3+, and 3. Component 12+ consists of two moieties: a [Ru(bpy)3]2+ unit, which plays the role of an electron donor under light excitation, and a DB24C8 crown ether, which fulfills the function of a socket. The wire-type component 2-H3+ is also composed of two moieties, a secondary dialkylammonium-ion center and a bipyridinium unit, which thread into the DB24C8 crown-ether socket of 12+ and the 1/5DN38C10 crown-ether socket 3, respectively. The photochemical, photophysical, and electrochemical properties of the three separated components, of the 12+ superset 2-H3+ and 2-H3+ subset 3 dyads, and of the 12+ superset 2-H3+ subset 3 triad have been investigated in CH2Cl2 solution containing 2% MeCN. Reversible connection/disconnection of the two plug/socket systems can be controlled independently by acid/base and redox stimulation. The behavior of the various different dyads and triad has been monitored by light absorption and emission spectroscopies, as well as by electrochemical techniques. In the fully connected 12+ superset 2-H3+ subset 3 triad, light excitation of the [Ru(bpy)3]2+ unit of component 12+ is followed by electron transfer (k = 2.8 x 108 s-1) to the bipyridinium unit of component 2-H3+, which is plugged into component 3. Possible schemes to obtain improved molecular-level electrical extension cables are discussed.     

Syntheses and Crystal Structures of Some CCo3 Clusters Containing PPh3 or dppm Ligands

Molecular structural determinations are reported for six Co₃C carbonyl cluster complexes containing tertiary phosphines, which have been isolated as by-products from a variety of reactions. Structural features are similar to those of related complexes already reported. Some discussion of apparent orientational preferences of the CH₂ group of dppm ligands, which appear to enter into H-bonding interactions with amido or carboxylate substituents, is given. Appropriate comparisons are made with unsubstituted analogues.     

EBC-232 and 323: A Structural Conundrum Necessitating Unification of Five In Silico Prediction and Elucidation Methods

Structurally unique halimanes EBC-232 and EBC-323, isolated from the Australian rainforest plant Croton insularis, proved considerably difficult to elucidate. The two diastereomers, which consist an unusual oxo-6,7-spiro ring system fused to a dihydrofuran, were solved by unification and consultation of five in silico NMR elucidation and prediction methods [i.e., ACDLabs, olefin strain energy (OSE), DP4, DU8+ and TD DFT CD]. Structure elucidation challenges of this nature are prime test case examples for empowering future AI learning in structure elucidation.     

Automated software-guided identification of new buspirone metabolites using capillary LC coupled to ion trap and TOF mass spectrometry

The identification and structure elucidation of drug metabolites is one of the main objectives in in vitro ADME studies. Typical modern methodologies involve incubation of the drug with subcellular fractions to simulate metabolism followed by LC-MS/MS or LC-MS(n) analysis and chemometric approaches for the extraction of the metabolites. The objective of this work was the software-guided identification and structure elucidation of major and minor buspirone metabolites using capillary LC as a separation technique and ion trap MS(n) as well as electrospray ionization orthogonal acceleration time-of-flight (ESI oaTOF) mass spectrometry as detection techniques.Buspirone mainly underwent hydroxylation, dihydroxylation and N-oxidation in S9 fractions in the presence of phase I co-factors and the corresponding glucuronides were detected in the presence of phase II co-factors. The use of automated ion trap MS/MS data-dependent acquisition combined with a chemometric tool allowed the detection of five small chromatographic peaks of unexpected metabolites that co-eluted with the larger chromatographic peaks of expected metabolites. Using automatic assignment of ion trap MS/MS fragments as well as accurate mass measurements from an ESI oaTOF mass spectrometer, possible structures were postulated for these metabolites that were previously not reported in the literature.     

Studies on the metabolism and the detectability of 4-methyl-amphetamine and its isomers 2-methyl-amphetamine and 3-methyl-amphetamine in rat urine using GC-MS and LC-(high-resolution)-MS n

4-Methyl-amphetamine (1-(4-methylphenyl)propane-2-amine; 4-MA) and its isomers 2-methyl-amphetamine (2-MA) and 3-methyl-amphetamine (3-MA) belong to the group of amphetamine-type stimulants and of new psychoactive substances. Several studies showed similar potencies in releasing noradrenalin and dopamine, but higher potencies in releasing serotonin than amphetamine. In March 2013, the EU Council decided on an EU-wide control based on the European Monitoring Centre for Drugs and Drug Addiction risk assessment report documenting that 4-MA was sold as amphetamine on the illicit market and detected in several fatal cases. Therefore, 4-MA and its isomers should be covered by drug testing in clinical and forensic toxicology. The aims of the presented work were to study the metabolism and detectability of each isomer in urine samples. For metabolism studies, rat urine samples were isolated by solid-phase extraction without and after enzymatic cleavage of conjugates. The phase I metabolites were separated and identified after acetylation by gas chromatography–mass spectrometry (GC-MS) and/or liquid chromatography–high resolution-linear ion trap mass spectrometry (LC-HR-MS ⁿ ) and the phase II metabolites by LC-HR-MS ⁿ . From the identified phase I and II metabolites, the following main metabolic pathways were deduced: aromatic hydroxylation, hydroxylation of the phenylmethyl group followed by oxidation to the corresponding carboxylic acid, hydroxylation of the side chain, and glucuronidation and/or sulfation of the hydroxy and carboxy groups. CYP2D6 was involved in the aromatic hydroxylation. Finally, the intake of a commonly used dose of the MAs could be confirmed in rat urine using the authors’ GC-MS and the LC-MS ⁿ standard urine screening approaches. Differentiation of the isomers to confirm the intake of a specific isomer was possible with an additional workup in rat urine.     

Accelerating chemical reactions: exploring reactive free-energy surfaces using accelerated ab initio molecular dynamics

A biased potential molecular dynamics simulation approach, accelerated molecular dynamics (AMD), has been implemented in the framework of ab initio molecular dynamics for the study of chemical reactions. Using two examples, the double proton transfer reaction in formic acid dimer and the hypothetical adiabatic ring opening and subsequent rearrangement reactions in methylenecyclopropane, it is demonstrated that ab initio AMD can be readily employed to efficiently explore the reactive potential energy surface, allowing the prediction of chemical reactions and the identification of metastable states. An adaptive variant of the AMD method is developed, which additionally affords an accurate representation of both the free-energy surface and the mechanism associated with the chemical reaction of interest and can also provide an estimate of the reaction rate.     

Large-scale asymmetric synthesis of the bioprotective agent JP4-039 and analogs

JP4-039 is a novel nitroxide conjugate capable of crossing lipid bilayer membranes and scavenging reactive oxygen species (ROS). An efficient and scalable one-pot hydrozirconation-transmetalation-imine addition methodology has been developed for its asymmetric preparation. Furthermore, this versatile methodology allows for the synthesis of cyclopropyl and fluorinated analogs of the parent lead structure.     

Structural Studies of Some Compounds Containing C2 Fragments Attached to Various Metal‐Ligand End‐Groups

The preparation, characterisation and single‐crystal XRD molecular structure determinations of four complexes containing –CC–ML_n end‐groups, namely Ru{C≡CFc′(I)}(dppe)Cp ( 1 ), the vinylidene [Os(=C=CH₂)(PPh₃)₂Cp]PF₆ ( 2 ), trans‐Pt(C≡CC₆H₄‐4‐C≡CPh){C≡CC₆H₄‐4‐C₂Ph[Co₂(μ‐dppm)(CO)₄]}(PPh₃)₂ ( 3 ), and C₆H₄{μ₃‐C₂[AuRu₃(CO)₉(PPh₃)]}₂‐1,4 ( 4 ) are reported. In these compounds a range of –CC– environments is found, extending from the σ‐bonded alkynyl group in 1 to examples where the C₂ unit interacts with either a proton (in vinylidene 2 ), by bridging a dicobalt carbonyl moiety (in 3 ) or the AuRu₃ cluster in 4 . Changes in geometry are rationalised by considering the various bonding modes.