Electron ionization in LC-MS: recent developments and applications of the direct-EI LC-MS interface

The purpose of this article is to underline the possibility of efficiently using electron ionization (EI) in liquid chromatography (LC) and mass spectrometry (MS). From a historical perspective, EI accompanied the first attempts in LC-MS but, owing to several technical shortcomings, it was soon outshined by soft, atmospheric pressure ionization (API) techniques. Nowadays, two modern approaches, supersonic molecular beam LC-MS and direct-EI LC-MS, offer a valid alterative to API, and preserve the advantages of EI also in LC-MS applications. These advantages can be summarized in three crucial aspects: automated library identification; identification of unknown compounds, owing to EI extensive fragment information; inertness to coeluted matrix interferences owing to very unlikely ion–ion and ion–molecule interactions in the EI gas-phase environment. The direct-EI LC-MS interface is a simple and efficient solution able to produce high-quality, interpretable EI spectra from a wide range of low molecular weight molecules of different polarity. Because of the low operative flow rates, this interface relies on a nano-LC technology that helps in reducing the impact of the mobile phase on the gas-phase environment of EI. This review provides an extensive discussion on the role of EI in LC-MS interfacing, and presents in detail several performance aspects of the direct-EI LC-MS interface, especially in terms of response, mass-spectral quality, and matrix effects. In addition, several key applications are also reported.     

Determination of parabens in shampoo using high performance liquid chromatography with amperometric detection on a boron-doped diamond electrode

Methylparaben (MePa), ethylparaben (EtPa) and propylparaben (PrPa) have been widely used, among others, as chemical preservatives in cosmetics, drugs and foods. As these compounds are linked with allergies, dermatitis and estrogenic properties, it is necessary to control the concentration of these substances in different matrices. The aim of this paper are: to evaluate the electrochemical behavior of parabens on the boron-doped diamond (BDD) electrode and the development of a chromatographic method, with electrochemical detection (HPLC-ED), for determination of parabens in shampoo. A BDD (8000 ppm) electrode was adapted in a thin layer mode analytical cell consisting of a stainless steel and a platinum wire as reference and auxiliary electrodes, respectively. Chromatographic separations were obtained with a reversed phase C8 analytical column and a mobile phase of 0.025 mol L⁻¹ disodium phosphate, pH 7.0, and acetonitrile (40:60, v/v), delivered at a flow rate of 1.0 mL min⁻¹. Sample preparation was performed by solid phase extraction using C18 cartridges and acetonitrile for elution. Benzylparaben was employed as internal standard. The HPLC-ED method developed, using the BDD electrode, was validated for the determination of parabens in shampoos and presented adequate linearity (>0.999), in the range of 0.0125-0.500% (w/w), detectability 0.01% (w/w), precision (RSD of 2.3-9.8%) and accuracy (93.1-104.4%) and could be applied for routine quality control of shampoos containing MePa, EtPa and PrPa.     

Analysis of Cannabinoids and Metabolites in Dried Urine Spots (DUS)

Dried urine spots (DUS) represent a potential alternative sample storage for forensic toxicological analysis. The aim of the current study was to develop and validate a liquid chromatographic tandem mass spectrometric procedure for the detection and quantitative determination of cannabinoids and metabolites in DUS. A two-step extraction was performed on DUS and urine samples. An LC-MS/MS system was operated in multiple reaction monitoring and positive polarization mode. The method was checked for sensitivity, specificity, linearity, accuracy, precision, recovery, matrix effects and carryover. The method was applied to 70 urine samples collected from healthy volunteers and drug addicts undergoing withdrawal treatment. The method was successfully developed for DUS. LODs lower than 2.0 ng/mL were obtained for all the monitored substances. All the validation parameters fulfilled the acceptance criteria either for DUS or urine. Among the real samples, 45 cases provided positive results for at least one compound. A good quali-quantitative agreement was obtained between DUS and urine. A good stability of THC, THCCOOH and THCCOOH-gluc was observed after a 24 h storage, in contrast to previously published results. DUS seems to provide a good alternative storage condition for urine that should be checked for the presence of cannabinoids and metabolites.     

Interaction of morpholine and thiomorpholine with molecular diiodine:X-ray crystal structure of morpholinium triiodide

The reactions between the donors morpholine (1) and thiomorpholine (2) with I₂ in low polar solvents (C₆H₆, CHCl₃, CH₂Cl₂) and different donor/I₂ concentration ratios (1:1, 1:2, 1:3) yield solids of stoichiometry 1·I₂, 1H⁺I⁻₃, 1H⁺I⁻₅, 2·I₂, and 2H⁺I⁻₃. Crystals suitable for X-ray structure determination have been obtained only for 1 H⁺I⁻₃. All the solids were characterized by FT-Raman and FT-IR spectroscopies in the region of the v(I-I) frequencies. Studies in solution have been carried out on each of the reactions between 1, 2, and N-methylmorpholine (3) with I₂. The formation constants of their 1:1 adducts determined at 20°C by UV-visible spectroscopy are 1781, 8500, and 8400 dm³ mol⁻¹, respectively. IR spectroscopy shows that I₂ binds the nitrogen of 1 and 2 both in axial and equatorial positions. Further, FT-Raman and ¹³CNMR spectroscopies support the nature of weak adducts between 1 (2) and the molecular diiodine in solution. © 1997 John Wiley & Sons, Inc.     

Determination of selected endocrine disrupting compounds in human fetal and newborn tissues by GC-MS

Endocrine disrupting compounds (EDCs) include organochlorine pesticides (OCPs), organophosphate pesticides (OPPs), carbamate pesticides, and plasticizers, such as bisphenol A (BPA). They persist in the environment because of their degradation resistance and bioaccumulate in the body tissues of humans and other mammals. Many studies are focused on the possible correlation between in utero exposure to EDCs and adverse health hazards in fetuses and newborns. In the last decade, environmental pollution has been considered a possible trigger for Sudden Infant Death Syndrome (SIDS) and Sudden Intrauterine Unexplained Death Syndrome (SIUDS), the most important death-causing syndromes in fetuses and newborns in developed countries. In this work, a rapid and sensitive analytical method was developed to determine the level of OCPs and OPPs, carbamates, and phenols in human fetal and newborn tissues (liver and brain) and to unveil the possible presence of non-targeted compounds. The target analytes where selected on the basis of their documented presence in the Trentino-Alto Adige region, an intensive agricultural area in northern Italy. A liquid-solid extraction procedure was applied on human and animal tissues and the extracts, after a solid phase extraction (SPE) clean-up procedure, were analyzed by gas chromatography coupled to a quadrupole mass spectrometric detector (GC-qMS). A GC-TOFMS (time-of-flight) instrument, because of its higher full-scan sensitivity, was used for a parallel detection of non-targeted compounds. Method validation included accuracy, precision, detection, and quantification limits (LODs; LOQs), and linearity response using swine liver and lamb brain spiked at different concentrations in the range of 0.4–8000.0 ng/g. The method gave good repeatability and extraction efficiency. Method LOQs ranged from 0.4–4.0 ng/g in the selected matrices. Good linearity was obtained over four orders of magnitude starting from LOQs. Isotopically labeled internal standards were used for quantitative calculations. The method was then successfully applied to the analysis of liver and brain tissues from SIUDS and SIDS victims coming from the above mentioned region.     

Evaluation of a fibre optic device in solution equilibria studies. Application to 3-hydroxybenzoic acid ionization

The use of a fibre optic device for spectrophotometric measurements in solution equilibria studies is presented. In particular the precision obtainable with such equipment is evaluated as a function of different experimental conditions, such as path length, averaging time and stirring of the solution. Analysis of 3-hydroxybenzoic acid ionization is presented to assess the results obtained in the study of an equilibrium system.     

In-depth performance investigation of a nano-LC gradient generator

An innovative approach for nano-liquid chromatography (LC) gradient generation is presented. This system represents an optimized and refined version of a prototype proposed by the authors a few years ago: the current version is characterized by a new configuration that guarantees complete automation and easier operation. The core of the system is an electronically controlled, multiposition valve that hosts six loops, filled with different mobile phase compositions of increasing strength. A conventional flow rate of water is reduced at nano-scale through a split device to push the content of the on-line loop into the column. No mixing occurs between solvents inside the loops, due to the low flow rate and the reduced loop diameter. Valve actuation allows the selection of the on-line loop to obtain the solvent gradient. The evaluation of the system performance takes into account gradient accuracy, precision, delay time, shape (linear, convex, or concave), and organic solvent consumption. Results highlight the reliability and the competitiveness of the system, especially in terms of accuracy and precision. A comparison between the described system and a conventional split-based one demonstrates that the new approach reduces the solvent consumption by about 40 times, improving green chromatography and cutting laboratory costs.     

Structural modifications and adsorption capability of C18-silica/binary solvent interphases studied by EPR and RP-HPLC

The structure of the octadecyl (C18) chain layer attached to a silica surface in the presence of binary solvents (acetonitrile/water; methanol/water) was investigated by electron paramagnetic resonance (EPR) and reverse-phase high-performance liquid chromatography (RP-HPLC), using 4-hydroxy-2,2,6,6 tetramethylpiperidine-N-oxyl (Tempol) to mimic the behavior of pollutants with medium-low polarity. The computer-aided analysis of the EPR spectra provided structural and dynamical information of the probe and its environments which clarified the modifications of the chain conformations that occur at different solvent compositions. Capacity factors, k', were calculated as a function of the percentage of water/organic solvent (mobile phase), and the retention behavior of the C18-functionalized silica surface (stationary phase) was compared with the results obtained with EPR analysis under static conditions. In particular, EPR analysis showed that, at percentages of ACN equal or higher than 50%, the chain layer assume a quite ordered structure, whereas at percentages lower than 50% the chains tend to collapse and fold on the silica surface. In this latter situation, the hydrophobic net of the C18 chains strongly limits Tempol mobility. In methanol/water mixtures, both EPR and RP-HPLC analysis showed that the probe was adsorbed into a poorly ordered interphase. If the residual silanols at the silica surface were bonded to a sililating agent (endcapping), both EPR and RP-HPLC analysis showed a decreased adsorption of the probe with respect to the non-endcapped silica at the same mobile phase composition.     

Development and validation of a stability-indicative agar diffusion assay to determine the potency of linezolid in tablets in the presence of photodegradation products

Linezolid (LNZ) is one of the first commercially available (and most widely used) oxazolidinone antibiotics. This study describes the development and validation of a microbiological assay, applying the cylinder-plate method, for the determination of the antibiotic linezolid, as well as the evaluation of the ability of the method in determining the stability of linezolid in tablets. The validation method yielded good results and included linearity, precision, accuracy, robustness and selectivity. The assay is based on the inhibitory effect of LNZ upon the strain of Bacillus subtilis ATCC 9372 used as the test microorganism. The results of the assay were treated statistically by analysis of variance (ANOVA) and were found to be linear (r² = 0.9998) in the range of 20-80 μg mL⁻¹, precise (inter-assay: R.S.D. = 0.61) and accurate (R.S.D. = 1.7). The method developed and validated proved to be indicative of stability and capable of determining the decay of linezolid in the presence of photodegradation products. Comparison of bioassay and liquid chromatography by ANOVA showed no significant difference between methodologies. The results demonstrated the validity of the proposed bioassay, which is a simple and useful alternative methodology for LNZ determination in routine quality control.     

Temperature effects on nano-LC column packing technology

We investigated the effect of temperature on the packing procedure of nano-LC columns (up to 50 cm) and on their performance. Several slurries of stationary phase were prepared using different solvent mixtures. Their stability was evaluated at several temperatures: 70°C, 50°C, and room temperature. At the higher temperature (70°C) the suspensions resulted to be stable for a longer time. For each slurry, we compared nano-LC columns packed with ultrasounds at 70°C and at room temperature. All the columns were tested with a standard mixture at 70°C, to reduce the solvent viscosity and the backpressure. Main chromatographic parameters such as the asymmetry factor, As, the reduced plate high, h, pattern in a Van Deemter plot, the total porosity, ε(t), and the permeability, k, were calculated and discussed. One of the nano-LC columns was used to separate a mixture of pesticides in a LC-MS system with an electron ionization LC-MS interface (Direct-EI). From our knowledge, this is the first study on the role of temperature in the efficiency of slurry-packing procedure.