Biofuel Combustion Chemistry: From Ethanol to Biodiesel

Biofuels, such as bio‐ethanol, bio‐butanol, and biodiesel, are of increasing interest as alternatives to petroleum‐based transportation fuels because they offer the long‐term promise of fuel‐source regenerability and reduced climatic impact. Current discussions emphasize the processes to make such alternative fuels and fuel additives, the compatibility of these substances with current fuel‐delivery infrastructure and engine performance, and the competition between biofuel and food production. However, the combustion chemistry of the compounds that constitute typical biofuels, including alcohols, ethers, and esters, has not received similar public attention. Herein we highlight some characteristic aspects of the chemical pathways in the combustion of prototypical representatives of potential biofuels. The discussion focuses on the decomposition and oxidation mechanisms and the formation of undesired, harmful, or toxic emissions, with an emphasis on transportation fuels. New insights into the vastly diverse and complex chemical reaction networks of biofuel combustion are enabled by recent experimental investigations and complementary combustion modeling. Understanding key elements of this chemistry is an important step towards the intelligent selection of next‐generation alternative fuels.     

Rapid fabrication of glass/PDMS hybrid µIMER for high throughput membrane proteomics

Mass spectrometry (MS) based proteomics has brought a radical approach to systems biology, offering a platform to study complex biological functions. However, key proteomic technical challenges remain, mainly the inability to characterise the complete proteome of a cell due to the thousands of diverse, complex proteins expressed at an extremely wide concentration range. Currently, high throughput and efficient techniques to unambiguously identify and quantify proteins on a proteome-wide scale are in demand. Miniaturised analytical systems placed upstream of MS help us to attain these goals. One time-consuming step in traditional techniques is the in-solution digestion of proteins (4-20 h). This also has other drawbacks, including enzyme autoproteolysis, low efficiency, and manual operation. Furthermore, the identification of α-helical membrane proteins has remained a challenge due to their high hydrophobicity and lack of trypsin cleavage targets in transmembrane helices. We demonstrate a new rapidly produced glass/PDMS micro Immobilised Enzyme Reactor (μIMER) with enzymes covalently immobilised onto polyacrylic acid plasma-modified surfaces for the purpose of rapidly (as low as 30 s) generating peptides suitable for MS analysis. This μIMER also allows, for the first time, rapid digestion of insoluble proteins. Membrane protein identification through this method was achieved after just 4 min digestion time, up to 9-fold faster than either dual-stage in-solution digestion approaches or other commonly used bacterial membrane proteomic workflows.     

Synthesis and application of pyridine-based ambipolar hosts: control of charge balance in organic light-emitting devices by chemical structure modification

We studied the influence of a pyridine moiety versus a phenyl moiety when introduced in the molecular design of an ambipolar host. These pyridine-based host materials for organic light-emitting diodes (OLEDs) were synthesized in three to five steps from commercially available starting materials. The isomeric hosts have similar HOMO/LUMO energies; however, data from OLEDs fabricated using the above host materials demonstrate that small structural modification of the host results in significant changes in its carrier-transporting characteristics.     

Use of a small particle solid‐core packing for improved efficiency and rapid measurement of sirolimus and everolimus by LC‐MS/MS

Measurement of whole blood sirolimus and everolimus is required in order to optimize patient treatment following solid organ transplant. Assay by LC‐MS/MS is increasingly preferred; however efficient use of the instrument and short turnaround times are crucial. Use of a 1.6 µm solid‐core packing HPLC column (Cortecs) gave significant increases in efficiency, sensitivity and throughput compared with an existing method, following simple protein precipitation of small‐volume (20 μL) whole blood samples. Sirolimus, everolimus and the stable isotopic internal standard (¹³C₂D₄ – everolimus) eluted at around 0.8 min, and total analytical run time was 2.2 min, saving almost 4 min per sample compared with an existing method. Within‐assay imprecision (CV) was 3.3–8.5%, and between‐assay imprecision was 2.2–10.8%. Retrospective assay of external quality assurance samples and comparison of patient samples assayed in parallel showed only small differences (between +6.8 and ?1.9%) in results using the Cortecs column when compared with the existing method. No significant interferences or ion suppression were observed. Copyright © 2015 John Wiley & Sons, Ltd.     

Analysis of substances to be used as internal standards in MEKC

The use of internal standards (ISs) improves the quantitative performance of CE. However, ISs chosen for use in CZE often cannot be used for micellar EKC (MEKC). Therefore 22 substances were investigated as potential ISs in MEKC. These substances were selected based upon a literature search. The substances were investigated using a method similar to the standard operating conditions for MEKC as recommended by S. Terabe. Furthermore, the migration time and the corrected migration time (k(S)) were determined for each substance to establish the migration position relative to other peaks in the electropherograms. A combination of eight substances, selected according to the obtained results (t(m) = 4 up to 12 min), was tested for practical benefit and applicability. The peak area precision was in the range of 0.8 and 1.2% (n = 60), and the peaks were well shaped for all the investigated substances. The selected substances covered a wide migration time window and therefore they can be regarded as suitable for future analysis at any required migration position.     

Non-fouling microfluidic chip produced by radio frequency tetraglyme plasma deposition

This Technical Note presents the direct surface modification of a glass/PTFE hybrid microfluidic chip, via radio frequency glow discharge plasma polymerisation of tetraethlylene glycol dimethylether (tetraglyme), to produce hydrophilic, non-fouling, PEO-like surfaces. We use several techniques including X-ray photoelectron spectroscopy (XPS), direct enzyme-linked immunosorbent assays (ELISA) and immunofluorescent imaging to investigate the channel coatings. Our results indicate the successful deposition of a PEO-like coating onto microchannel surfaces that has both solution and shelf stability (>3 months) and is capable of preventing fibrinogen adsorption to the microchannel surfaces.     

Analysis and deconvolution of dimethylnaphthalene isomers using gas chromatography vacuum ultraviolet spectroscopy and theoretical computations

An issue with most gas chromatographic detectors is their inability to deconvolve coeluting isomers. Dimethylnaphthalenes are a class of compounds that can be particularly difficult to speciate by gas chromatography – mass spectrometry analysis, because of their significant coelution and similar mass spectra. As an alternative, a vacuum ultraviolet spectroscopic detector paired with gas chromatography was used to study the systematic deconvolution of mixtures of coeluting isomers of dimethylnaphthalenes. Various ratio combinations of 75:25; 50:50; 25:75; 20:80; 10:90; 5:95; and 1:99 were prepared to test the accuracy, precision, and sensitivity of the detector for distinguishing overlapping isomers that had distinct, but very similar absorption spectra. It was found that, under reasonable injection conditions, all of the pairwise overlapping isomers tested could be deconvoluted up to nearly two orders of magnitude (up to 99:1) in relative abundance. These experimental deconvolution values were in agreement with theoretical covariance calculations performed for two of the dimethylnaphthalene isomers. Covariance calculations estimated high picogram detection limits for a minor isomer coeluting with low to mid-nanogram quantity of a more abundant isomer. Further characterization of the analytes was performed using density functional theory computations to compare theory with experimental measurements. Additionally, gas chromatography – vacuum ultraviolet spectroscopy was shown to be able to speciate dimethylnaphthalenes in jet and diesel fuel samples.     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.     

A new 3-alkylpyridine alkaloid from the marine sponge Haliclona sp. and its cytotoxic activity

A new alkaloid, 3-dodecyl pyridine containing a terminal cyano group (1), was isolated from the methanol extract of an Indonesia marine sponge Haliclona sp. Its chemical structure was determined by a combination of spectroscopic methods, including 1D and 2D NMR. Bioassay results indicated that compound 1 had moderate cytotoxity against tumour cell lines A549, MCF-7 and Hela with IC₅₀ values of 41.8, 48.4 and 33.2 μM, respectively.