Formation of silica nanofibers with hierarchical structure via electrospinning

Self-standing thiol-functionalized fibrous membrane with bimodal pore structure was successfully fabricated through the combination of electrospinning and surfactant-directing pore formation technique. We also found that the interference of electric field as well as the rapid solvent evaporation during the electrospinning process has a negative effect on the formation of ordered mesoporous structures. As high-performance adsorption-based filtration system, such hierarchically structured membrane is found to efficiently remove Cu (II) ions under high flux.     

Retention mechanism of a cholesterol-coated C18 stationary phase: van't Hoff and Linear Solvation Energy Relationships (LSER) approaches

This study examines the effect of temperature on the dynamic cholesterol coating of a C18 stationary phase and the effect of this coating on the retention mechanism. In general, an increase in temperature results in a decrease in the mass of cholesterol coated on the stationary phase. Typically, an increase in temperature from 25°C to 55°C results in a nearly 60% reduction in the mass of cholesterol loaded. The inclusion of temperature, along with loading solvent composition and cholesterol concentration in the loading solvent, allows for loading a targeted amount of cholesterol on the stationary phase over an order-of-magnitude range. In addition to loading studies, the retention mechanism of small non-ionizable solutes was examined on cholesterol-coated stationary phases. A van't Hoff analysis was performed to assess retention thermodynamics, while a LSER approach was used to examine retention mechanism. With 50/50 water/organic mobile phases, the addition of cholesterol results in an increase in the entropic contribution to retention, with a decrease in the enthalpic contribution. The opposite trend is seen with 40/60 water/organic mobile phases. LSER system constants are also affected by a cholesterol coating on the stationary phase, with some changing to favor elution and others changing to favor retention.     

Assessing chiral self-recognition using chiral stationary phases

Chiral stationary phases were synthesized and their ability to separate racemic precursors from which they were derived was assessed. Taken in conjunction with homochiral recognition previously observed in the solid state, the results of this study reveal that a geometrically controlling π-π interaction has a profound influence on molecular recognition.     

Radical O→C transposition: a metal-free process for conversion of phenols into benzoates and benzamides

We report a metal-free procedure for transformation of phenols into esters and amides of benzoic acids via a new radical cascade. Diaryl thiocarbonates and thiocarbamates, available in a single high-yielding step from phenols, selectively add silyl radicals at the sulfur atom of the C═S moiety. This addition step, analogous to the first step of the Barton-McCombie reaction, produces a carbon radical which undergoes 1,2 O→C transposition through an O-neophyl rearrangement. The usually unfavorable equilibrium in the reversible rearrangement step is shifted forward via a highly exothermic C-S bond scission in the O-centered radical, which furnishes the final benzoic ester or benzamide product. The metal-free preparation of benzoic acid derivatives from phenols provides a potentially useful alternative to metal-catalyzed carbonylation of aryl triflates.     

Adsorption of chlorophenol on the Cu(1 1 1) surface: A first-principles density functional theory study

The interaction between a 2-chlorophenol (C₆H₄OHCl) molecule and the Cu(1 1 1) surface has been investigated using density functional theory as an initial step in gaining a better understanding of the catalyzed formation of dioxin compounds on a clean copper surface. The 2-chlorophenol molecule is found to form several weakly bonded, horizontally and vertically oriented configurations. Dissociative modes have also been investigated. For the latter, the formation of phenyl and benzyne fragments is found to be more energetically favourable than the formation of 2-chlorophenoxy radicals.     

Limits of filopodium stability

Filopodia are long, fingerlike membrane tubes supported by cytoskeletal filaments. Their shape is determined by the stiffness of the actin filament bundles found inside them and by the interplay between the surface tension and bending rigidity of the membrane. Although one might expect the Euler buckling instability to limit the length of filopodia, we show through simple energetic considerations that this is in general not the case. By further analyzing the statics of filaments inside membrane tubes, and through computer simulations that capture membrane and filament fluctuations, we show under which conditions filopodia of arbitrary lengths are stable. We discuss several in vitro experiments where this kind of stability has already been observed. Furthermore, we predict that the filaments in long, stable filopodia adopt a helical shape.     

Anisotropy of constrained magnetostrictive materials

The magnetic anisotropy of a ferromagnetic material that is free to deform is defined as the effective anisotropy, which is the sum of intrinsic anisotropy and magnetostriction-induced anisotropy. Prior works [1] and [2] (Baltzer, 1957; Kittel, 1949) indicate that if the material is undeformed then the measured anisotropy is same as its intrinsic anisotropy. When magnetostrictive materials are used as actuators or sensors they are often mechanically loaded, resulting in a restriction on the deformation. To capture their behavior in such scenarios, a modelling approach is required. Therefore, in this work, the thermodynamic accuracy of the common expressions for magnetostriction-induced and stress-induced anisotropies is first investigated. A 3D magnetoelastic model is then developed using Armstrong's implementation of an energy model. This 3D magnetoelastic model is capable of predicting the stresses induced when the magnetostriction of these materials is constrained. Using this model, it is shown that when the bulk magnetostriction of the material is clamped, the measured anisotropy will not in general be the same as the intrinsic anisotropy. It is also shown that when the magnetostriction is clamped at the microscopic level, i.e. if the material is locally constrained at the exchange length scales, then the measured anisotropy is the intrinsic anisotropy.     

Active metal brazing of Al2O3 to Kovar® (Fe–29Ni–17Co wt.%) using Copper ABA® (Cu–3.0Si–2.3Ti–2.0Al wt.%)

The application of an active braze alloy (ABA) known as Copper ABA® (Cu–3.0Si–2.3Ti–2.0Al wt.%) to join Al₂O₃ to Kovar® (Fe–29Ni–17Co wt.%) has been investigated. This ABA was selected to increase the operating temperature of the joint beyond the capabilities of typically used ABAs such as Ag–Cu–Ti-based alloys. Silica present as a secondary phase in the Al₂O₃ at a level of ~5 wt.% enabled the ceramic component to bond to the ABA chemically by forming a layer of Si₃Ti₅ at the ABA/Al₂O₃ interface. Appropriate brazing conditions to preserve a near-continuous Si₃Ti₅ layer on the Al₂O₃ and a continuous Fe₃Si layer on the Kovar® were found to be a brazing time of ≤15 min at 1025 °C or ≤2 min at 1050 °C. These conditions produced joints that did not break on handling and could be prepared easily for microscopy. Brazing for longer periods of time, up to 45 min, at these temperatures broke down the Si₃Ti₅ layer on the Al₂O₃, while brazing at ≥1075 °C for 2–45 min broke down the Fe₃Si layer on the Kovar® significantly. Further complications of brazing at ≥1075 °C included leakage of the ABA out of the joint and the formation of a new brittle silicide, Ni₁₆Si₇Ti₆, at the ABA/Al₂O₃ interface. This investigation demonstrates that it is not straightforward to join Al₂O₃ to Kovar® using Copper ABA®, partly because the ranges of suitable values for the brazing temperature and time are quite limited. Other approaches to increase the operating temperature of the joint are discussed.     

In Vivo Evaluation of (−)-Zampanolide Demonstrates Potent and Persistent Antitumor Efficacy When Targeted to the Tumor Site

Microtubule-stabilizing agents (MSAs) are a class of compounds used in the treatment of triple-negative breast cancer (TNBC), a subtype of breast cancer where chemotherapy remains the standard-of-care for patients. Taxanes like paclitaxel and docetaxel have demonstrated efficacy against TNBC in the clinic, however new classes of MSAs need to be identified due to the rise of taxane resistance in patients. (−)-Zampanolide is a covalent microtubule stabilizer that can circumvent taxane resistance in vitro but has not been evaluated for in vivo antitumor efficacy. Here, we determine that (−)-zampanolide has similar potency and efficacy to paclitaxel in TNBC cell lines, but is significantly more persistent due to its covalent binding. We also provide the first reported in vivo antitumor evaluation of (−)-zampanolide where we determine that it has potent and persistent antitumor efficacy when delivered intratumorally. Future work on zampanolide to further evaluate its pharmacophore and determine ways to improve its systemic therapeutic window would make this compound a potential candidate for clinical development through its ability to circumvent taxane-resistance mechanisms.