Limonene in Arizona liquid systems used in countercurrent chromatography. I Physicochemical properties

Limonene is a biorenewable cycloterpene solvent derived from orange peel waste. Its potential as a “green” solvent to replace heptane was recently evaluated. Countercurrent chromatography (CCC) is a preparative separation technique using biphasic liquid systems. One liquid phase is the mobile phase; the other liquid phase is the stationary phase held in place by centrifugal fields. A particular range of special proportions of the heptane/ethyl acetate/methanol/water system is called the Arizona (AZ) liquid system when the heptane/ethyl acetate ratio is exactly the same as the methanol/water ratio. A continuous polarity decrease is obtained between the most polar A composition (ethyl acetate/water or 0/1/0/1 v/v) and the least polar Z composition (heptane/methanol or 1/0/1/0 v/v), replacing heptane by limonene and methanol by ethanol produce biphasic liquid systems much more environmentallyfriendly than the original AZ compositions. The chemical compositions of the two liquid phases of 12 AZ limonene/ethyl acetate/ethanol/water proportions were fully determined by Karl-Fisher titration of water and by gas chromatography for the organic solvents. The results were compared with the compositions of the corresponding AZ mixtures containing heptane and methanol. Significant differences in ethyl acetate and ethanol distribution between phases of the two systems with identical volume proportions were established. The ratio of the upper phase over the lower phase volumes and the phase density difference are important in CCC, there are also significant differences between the classic and “green” AZ systems that are discussed.     

Biofunctionalization of Multiwalled Carbon Nanotubes by Electropolymerized Poly(pyrrole‐concanavalin A) Films

The synthesis and electropolymerization of a pyrrolic concanavalin A derivative (pyrrole‐Con A) onto a multiwalled carbon nanotube (MWCNT) deposit is reported. Glucose oxidase was then immobilized onto the MWCNT‐poly(pyrrole‐Con A) coating by affinity carbohydrate interactions with the polymerized Con A protein. The resulting enzyme electrode was applied to the amperometric detection of glucose exhibiting a high sensitivity of 36 mA cm^?2 mol^?1 L and a maximum current density of 350 μA cm^?2.     

Improved method for isotopic and quantitative analysis of dissolved inorganic carbon in natural water samples

We present here an improved and reliable method for measuring the concentration of dissolved inorganic carbon (DIC) and its isotope composition (delta(13)C(DIC)) in natural water samples. Our apparatus, a gas chromatograph coupled to an isotope ratio mass spectrometer (GCIRMS), runs in a quasi-automated mode and is able to analyze about 50 water samples per day. The whole procedure (sample preparation, CO(2(g))-CO(2(aq)) equilibration time and GCIRMS analysis) requires 2 days. It consists of injecting an aliquot of water into a H(3)PO(4)-loaded and He-flushed 12 mL glass tube. The H(3)PO(4) reacts with the water and converts the DIC into aqueous and gaseous CO(2). After a CO(2(g))-CO(2(aq)) equilibration time of between 15 and 24 h, a portion of the headspace gas (mainly CO(2)+He) is introduced into the GCIRMS, to measure the carbon isotope ratio of the released CO(2(g)), from which the delta(13)C(DIC) is determined via a calibration procedure. For standard solutions with DIC concentrations ranging from 1 to 25 mmol . L(-1) and solution volume of 1 mL (high DIC concentration samples) or 5 mL (low DIC concentration samples), delta(13)C(DIC) values are determined with a precision (1sigma) better than 0.1 per thousand. Compared with previously published headspace equilibration methods, the major improvement presented here is the development of a calibration procedure which takes the carbon isotope fractionation associated with the CO(2(g))-CO(2(aq)) partition into account: the set of standard solutions and samples has to be prepared and analyzed with the same 'gas/liquid' and 'H(3)PO(4)/water' volume ratios. A set of natural water samples (lake, river and hydrothermal springs) was analyzed to demonstrate the utility of this new method.     

The versatility of pentalene coordination to transition metals: a density functional theory investigation

DFT calculations with full geometry optimization have been carried out on a series of real and hypothetical compounds of the type [CpM(C8H6)], [(CO)3M(C8H6)], [M(C8H6)2], [(CpM)2(C8H6)], [[(CO)3M]2(C8H6)], and [M2(C8H6)2] (M = transition metal). The bonding in all the currently known compounds is rationalized, as well as in the (so far) hypothetical stable complexes. Depending on the electron count and the nature of the metal(s), eta2 (predicted), eta3, eta5, eta8, or intermediate coordination modes can be adopted. In the case of the mononuclear species, the most favored closed-shell electron counts are 18 and 16 metal valence electrons (MVE). In the case of the dinuclear species, an electron count of 34 MVEs is most favored. However, other electron counts can be stabilized, especially in the case of dinuclear complexes. Coordinated pentalene should most often be considered as formally being a dianion, but sometimes as a neutral ligand. In the former case it can behave as an aromatic species made of two equivalent fused rings, as a C5 aromatic ring connected to an allylic anion, or even as two allylic anions bridged by a C7=C8 double bond. In the latter case, it can behave as a bond-alternating cyclic polyene or as a C5 aromatic ring connected to an allylic cation.     

Dendron‐Functionalized Core–Shell Superparamagnetic Nanoparticles: Magnetically Recoverable and Reusable Catalysts for Suzuki C?C Cross‐Coupling Reactions

A metallodendron functionalized with dicyclohexyldiphosphino palladium complex was synthesized. The metallodendron was grafted onto core–shell superparamagnetic nanoparticles (γ‐Fe₂O₃/polymer, 200–500 nm) to give optimal catalytic reactivity in cross‐coupling reactions. The grafted nanoparticles were used as recoverable and reusable catalysts for Suzuki C? C cross‐coupling reactions. They showed remarkable reactivity towards iodo‐ and bromoarenes under mild conditions, and unprecedented reactivity towards chloroarenes. On completion of the catalytic reaction, the catalysts were readily recovered by using a simple magnet to attract the superparamagnetic grafted nanoparticles. Catalysts were recovered more than 25 times with almost no discernable loss of reactivity.     

New polycyclic diamine scaffolds from dimerization of 3-alkyl-1,4-dihydropyridines in acidic medium

[reaction: see text] 3-Alkyl-1,4-dihydropyridines dimerize in acidic medium, at low temperature, to give polycyclic imminium salts derivatives that were reduced to afford new polycyclic diamine scaffolds. The reaction can be extended to enantiopure series starting from R-(+)- or S-(-)-1-phenylethylamine. Long exposure of the polycyclic imminium salt intermediates to air moisture at 20 degrees C resulted in formation of new amide derivatives. This is probably due to the addition of water followed by an intramolecular oxido-reduction process.     

Synthesis of 4'-aminopantetheine and derivatives to probe aminoglycoside N-6'-acetyltransferase

A convenient synthesis of 4'-aminopantetheine from commercial D-pantethine is reported. The amino group was introduced by reductive amination in order to avoid substitution at a sterically congested position. Derivatives of 4'-aminopantetheine were also prepared to evaluate the effect of O-to-N substitution on inhibitors of the resistance-causing enzyme aminoglycoside N-6'-acetyltransferase. The biological results combined with docking studies indicate that in spite of its reported unusual flexibility and ability to adopt different folds, this enzyme is highly specific for AcCoA.     

Ruthenium nanoparticles in ionic liquids: structural and stability effects of polar solutes

Ionic liquids are a stabilizing medium for the in situ synthesis of ruthenium nanoparticles. Herein we show that the addition of molecular polar solutes to the ionic liquid, even in low concentrations, eliminates the role of the ionic liquid 3D structure in controlling the size of ruthenium nanoparticles, and can induce their aggregation. We have performed the synthesis of ruthenium nanoparticles by decomposition of [Ru(COD)(COT)] in 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [C(1)C(4)Im][NTf(2)], under H(2) in the presence of varying amounts of water or 1-octylamine. For water added during the synthesis of metallic nanoparticles, a decrease of the solubility in the ionic liquid was observed, showed by nanoparticles located at the interface between aqueous and ionic phases. When 1-octylamine is present during the synthesis, stable nanoparticles of a constant size are obtained. When 1-octylamine is added after the synthesis, aggregation of the ruthenium nanoparticles is observed. In order to explain these phenomena, we have explored the molecular interactions between the different species using (13)C-NMR and DOSY (Diffusional Order Spectroscopy) experiments, mixing calorimetry, surface tension measurements and molecular simulations. We conclude that the behaviour of the ruthenium nanoparticles in [C(1)C(4)Im][NTf(2)] in the presence of 1-octylamine depends on the interaction between the ligand and the nanoparticles in terms of the energetics but also of the structural arrangement of the amine at the nanoparticle's surface.     

Fette

Ohne Zusammenfassung