Embedded silver ions-containing liposomes in polyelectrolyte multilayers: cargos films for antibacterial agents

A new antibacterial coating made of poly(L-lysine)/hyaluronic acid (PLL/HA) multilayer films and liposome aggregates loaded with silver ions was designed. Liposomes filled with an AgNO 3 solution were first aggregated by the addition of PLL in solution. The obtained micrometer-sized aggregates were then deposited on a PLL/HA multilayer film, playing the role of a spacer with the support. Finally, HA/PLL/HA capping layers were deposited on top of the architecture to form a composite AgNO 3 coating. Release of encapsulated AgNO 3 from this composite coating was followed and triggered upon temperature increase over the transition temperature of vesicles, found to be equal to 34 degrees C. After determination of the minimal inhibitory concentration (MIC) of AgNO 3 in solution, the antibacterial activity of the AgNO 3 coating was investigated against Escherichia coli. A 4-log reduction in the number of viable E. coli cells was observed after contact for 120 min with a 120 ng/cm (2) AgNO 3 coating. In comparison, no bactericidal activity was found for PLL/HA films previously dipped in an AgNO 3 solution and for PLL/HA films with liposome aggregates containing no AgNO 3 solution. The strong bactericidal effect could be linked to the diffusion of silver ions out of the AgNO 3 coating, leading to an important bactericidal concentration close to the membrane of the bacteria. A simple method to prepare antibacterial coatings loaded with a high and controlled amount of AgNO 3 is therefore proposed. This procedure is far superior to that soaking AgNO 3 or Ag nanoparticles into a coating. In principle, other small bactericidal chemicals like antibiotics could be encapsulated by this method. This study opens a new route to modify surfaces with small solutes that are not permeating phospholipid membranes below the phase transition temperature.     

Oligo(p-phenylenevinylene)-peptide conjugates: synthesis and self-assembly in solution and at the solid-liquid interface

Two oligo(p-phenylenevinylene)-peptide hybrid amphiphiles have been synthesized using solid- and liquid-phase strategies. The amphiliphiles are composed of a pi-conjugated oligo(p-phenylenevinylene) trimer (OPV) which is coupled at either a glycinyl-alanyl-glycinyl-alanyl-glycine (GAGAG) silk-inspired beta-sheet or a glycinyl-alanyl-asparagyl-prolyl-asparagy-alanyl-alanyl-glycine (GANPNAAG) beta-turn forming oligopeptide sequence. The solid-phase strategy enables one to use longer peptides if strong acidic conditions are avoided, whereas the solution-phase coupling gives better yields. The study of the two-dimensional (2D) self-assembly of OPV-GAGAG by scanning tunneling microscopy (STM) at the submolecular level demonstrated the formation of bilayers in which the molecules are lying antiparallel in a beta-sheet conformation. In the case of OPV-GANPNAAG self-assembled monolayers could not be observed. Absorption, fluorescence, and circular dichroism studies showed that OPV-GAGAG and OPV-GANPNAAG are aggregated in a variety of organic solvents. In water cryogenic temperature transmission electron microscopy (cryo-TEM), atomic force microscopy (AFM), light scattering, and optical studies reveal that self-assembled nanofibers are formed in which the helical organization of the OPV segments is dictated by the peptide sequence.     

Conformation of N(alpha)-substituted hydrazino acetamides in CDCl3, the precious help of the analysis of Deltadelta between amidic hydrogens, and correlation to the conformation of aza-beta3-peptides

[structures: see text] We studied the conformation of a series of primary amides in a solution of chloroform. Classical NMR tools such as dilution experiments, influence of DMSO, and 2D-NOESY, together with X-ray diffraction, were combined with an analysis of the difference of the chemical shift Deltadelta between the geminal amidic protons. This study was addressed in order to understand the conformation adopted by hydrazino acetamides 1a and 1b as model compounds for aza-beta3-peptides. In this manner, it was possible to show that the amidic group of these compounds acts as a H-bond donor and interacts with two different H-bond acceptors. We concluded that the hydrazinoturn, a specific bifurcated H-bond system observed in the solid state, is also the preferred conformation of hydrazino acetamides 1a and 1b in solution. Our results show that the short-range interaction with the N(alpha)-nitrogen lone pair not only stabilizes the C8 pseudocycle but could also contribute to the folding process of aza-beta3-peptides. In light of this, it could explain why aza-beta3-peptides develop a different H-bond network in comparison to their isosteric beta3-peptides analogues. Our work is in keeping with the recent interest of hydrazino peptides as an extension of the beta-peptide concept.     

Diastereoselective Pictet-Spengler approach for the synthesis of pyrrolo[3,2-e][1,4]diazepin-2-one peptide turn mimics

Sixteen pyrrolo[3,2- e][1,4]diazepin-2-ones 1 were synthesized in 4-5 steps and 5-48% overall yields from 4-oxoproline 8 by a route featuring a diastereoselective Pictet-Spengler reaction to close the seven-membered diazepinone ring. Crystallographic analysis of pyrrolo[3,2- e][1,4]diazepin-2-one 1b by X-ray diffraction demonstrated that the alpha-amino acid residue adopted dihedral angle geometry similar to an ideal gamma-turn, illustrating the potential for employing these novel heterocycles as peptide turn mimics.     

Rapid access to amino-substituted quinoline, (di)benzofuran, and carbazole heterocycles through an aminobenzannulation reaction

The use of a powerful aminobenzannulation reaction has been applied for the synthesis of amino-substituted quinolines, dibenzofurans, and carbazoles. The precursors are heterocycles bearing a methyl ketone group ortho to an internal alkyne. They are commercially available or can be obtained in three to four classical and efficient reactions: Vilsmeier-Haack, Sonogashira (diversity point), Grignard, and Ley's oxidation. Upon aminobenzannulation reaction-classical conditions being pyrrolidine neat or in a solvent and 4 A MS-an interesting range of disubstituted quinolines, dibenzofurans, and carbazoles are obtained along with enamine formation in some cases. The reaction is useful since meta-substituted heterocycles are produced and also differs from classical heterocyclic methods which go through closure at the heteroatom-containing ring instead of benzene ring formation.     

Identity SN2 reactions X- + CH3X --> XCH3 + X- (X=F, Cl, Br, and I) in vacuum and in aqueous solution: a valence bond study

The recently developed (L. Song, W. Wu, Q. Zhang, S. Shaik, J. Phys. Chem. A 2004, 108, 6017) valence bond method coupled with a polarized continuum model (VBPCM) has been applied to the identity SN2 reaction of halides in the gas phase and in aqueous solution. The barriers computed at the level of the breathing orbital VB method (P. C. Hiberty, J. P. Flament, E. Noizet, Chem. Phys. Lett. 1992, 189, 259), BOVB and VBPCM//BOVB, are comparable to CCSD(T) and CCSD(T)//PCM results and to experimentally derived barriers in solution (W. J. Albery, M. M. Kreevoy, Adv. Phys. Org. Chem. 1978, 16, 85). The reactivity parameters needed to apply the valence bond state correlation diagram (VBSCD) method (S. Shaik, J. Am. Chem. Soc. 1984, 106, 1227), were also determined by VB calculations. It has been shown that the reactivity parameters along with their semiempirical derivations provide a satisfactory qualitative and quantitative account of the barriers.     

Cyclopropanation of Terminal Alkenes through Sequential Atom‐Transfer Radical Addition/1,3‐Elimination

An operationally simple method to affect an atom‐transfer radical addition of commercially available ICH₂Bpin to terminal alkenes has been developed. The intermediate iodide can be transformed in a one‐pot process into the corresponding cyclopropane upon treatment with a fluoride source. This method is highly selective for the cyclopropanation of unactivated terminal alkenes over non‐terminal alkenes and electron‐deficient alkenes. Due to the mildness of the procedure, a wide range of functional groups such as esters, amides, alcohols, ketones, and vinylic cyclopropanes are well tolerated.     

Tuning the Chemistry of Organonitrogen Compounds for Promoting All‐Organic Anionic Rechargeable Batteries

The ever‐increasing demand for rechargeable batteries induces significant pressure on the worldwide metal supply, depleting resources and increasing costs and environmental concerns. In this context, developing the chemistry of anion‐inserting electrode organic materials could promote the fabrication of molecular (metal‐free) rechargeable batteries. However, few examples have been reported because little effort has been made to develop such anionic‐ion batteries. Here we show the design of two anionic host electrode materials based on the N‐substituted salts of azaaromatics (zwitterions). A combination of NMR, EDS, FTIR spectroscopies coupled with thermal analyses and single‐crystal XRD allowed a thorough structural and chemical characterization of the compounds. Thanks to a reversible electrochemical activity located at an average potential of 2.2 V vs. Li⁺/Li, the coupling with dilithium 2,5‐(dianilino)terephthalate (Li₂DAnT) as the positive electrode enabled the fabrication of the first all‐organic anionic rechargeable batteries based on crystallized host electrode materials capable of delivering a specific capacity of ≈27 mAh/g_electrodes with a stable cycling over dozens of cycles (≈24 Wh/kg_electrodes).     

Orbitals and the Interpretation of Photoelectron Spectroscopy and (e,2e) Ionization Experiments

Electron momentum spectroscopy, scanning tunneling microscopy, and photoelectron spectroscopy provide unique information about electronic structure, but their interpretation has been controversial. This essay discusses a framework for interpretation. Although this interpretation is not new, we believe it is important to present this framework in light of recent publications. The key point is that these experiments provide information about how the electron distribution changes upon ionization, not how electrons behave in the pre‐ionized state. Therefore, these experiments do not lead to a “selection of the correct orbitals” in chemistry and do not overturn the well‐known conclusion that both delocalized molecular orbitals and localized molecular orbitals are useful for interpreting chemical structure and dynamics. The two types of orbitals can produce identical total molecular electron densities and therefore molecular properties. Different types of orbitals are useful for different purposes.     

The porosity, acidity, and reactivity of dealuminated zeolite ZSM-5 at the single particle level: the influence of the zeolite architecture

A combination of atomic force microscopy (AFM), high‐resolution scanning electron microscopy (HR‐SEM), focused‐ion‐beam scanning electron microscopy (FIB‐SEM), X‐ray photoelectron spectroscopy (XPS), confocal fluorescence microscopy (CFM), and UV/Vis and synchrotron‐based IR microspectroscopy was used to investigate the dealumination processes of zeolite ZSM‐5 at the individual crystal level. It was shown that steaming has a significant impact on the porosity, acidity, and reactivity of the zeolite materials. The catalytic performance, tested by the styrene oligomerization and methanol‐to‐olefin reactions, led to the conclusion that mild steaming conditions resulted in greatly enhanced acidity and reactivity of dealuminated zeolite ZSM‐5. Interestingly, only residual surface mesoporosity was generated in the mildly steamed ZSM‐5 zeolite, leading to rapid crystal coloration and coking upon catalytic testing and indicating an enhanced deactivation of the zeolites. In contrast, harsh steaming conditions generated 5–50 nm mesopores, extensively improving the accessibility of the zeolites. However, severe dealumination decreased the strength of the Brønsted acid sites, causing a depletion of the overall acidity, which resulted in a major drop in catalytic activity.