Carrier-injection-based electro-optic modulator on silicon-on-insulator with a heterogeneously integrated III-V microdisk cavity

A compact electro-optic modulator on silicon-on-insulator is presented. The structure consists of a III-V microdisk cavity heterogeneously integrated on a silicon-on-insulator wire waveguide. By modulating the loss of the active layer included in the cavity through carrier injection, the power of the transmitted light at the resonant wavelength is modulated; approximately 10 dB extinction ratio and 2.73 Gbps dynamic operation are demonstrated without using any special driving techniques.     

Comparative measurements of loudspeakers in a listening situation

Comparison of loudspeakers is a major concern during design or product selection. There are several standards for the measurement of loudspeaker characteristics, but none of them provides hints for a rigorous comparison between devices. In this study, different ways of evaluating acoustical dissimilarity between loudspeakers were compared. Several methods of signal analysis were used, and for each method a metric evaluating the dissimilarity between two signals was defined. The correlation between the different dissimilarity evaluations over a significant panel of loudspeakers led to identified classes of measurements. A specific aspect of this work is that measurements were performed in a standard listening environment, rather than in an anechoic or reverberant one. It allowed the use of the recorded signals for a simple listening test, providing a perceptual metric which was compared to the acoustical ones. It also allowed the introduction of auditory models in the computation of some acoustical metrics, so defining a new class of measurements which gave results close to the perceptual ones.     

MRI methodological development of intervertebral disc degeneration: a rabbit in vivo study at 9.4 T

Intervertebral disc (IVD) degeneration is a complex process characterized by biochemical and structural changes in both the nucleus pulposus and the anulus fibrosus. In this study, we were able to obtain in vivo magnetic resonance (MR) images of the rabbit spine, with several MR imaging (MRI) contrasts (ρ, T₁ and T₂). We quantified several parameters (T₂, apparent diffusion coefficient, disc height and area) to differentiate between healthy and degenerative IVDs and to characterize the degeneration process. To our knowledge, there has not been any previous in vivo study of rabbit IVDs at high-field MRI (9.4 T).A custom radio frequency (RF) coil for 9.4 T was designed to match rabbit IVD morphology, to study the degeneration in vivo on a model of human lumbar disease. Our new probe, a custom half-birdcage-type coil, obtains the necessary exploration depth while meeting the requirements for signal homogeneity and sensitivity of the study. This design addresses some of the difficulties with constructing RF coils at high field strengths.     

Small-scale seismic inversion using surface waves extracted from noise cross correlation

Green's functions can be retrieved between receivers from the correlation of ambient seismic noise or with an appropriate set of randomly distributed sources. This principle is demonstrated in small-scale geophysics using noise sources generated by human steps during a 10-min walk in the alignment of a 14-m-long accelerometer line array. The time-domain correlation of the records yields two surface wave modes extracted from the Green's function between each pair of accelerometers. A frequency-wave-number Fourier analysis yields each mode contribution and their dispersion curve. These dispersion curves are then inverted to provide the one-dimensional shear velocity of the near surface.     

Structural investigation of an amorphous Si24Nb76 alloy produced by mechanical alloying using reverse Monte Carlo simulations

The atomic structure of an amorphous Si₂₄Nb₇₆ alloy produced by mechanical alloying was investigated by using one X-ray total structure factor S(K) as input data for reverse Monte Carlo (RMC) simulations. The partial S_Si–Si(K), S_Si–Nb(K), S_Nb–Nb(K) structure factors and G_Si–Si(r), G_Si–Nb(r), G_Nb–Nb(r) pair probability functions were obtained from the RMC simulations. The structural parameters (interatomic distances and co-ordination numbers) for the first neighbors were extracted and compared with those found in the Nb₃Si compound. It was observed some resemblance between these phases.     

Catalytic Asymmetric Syntheses of Alkylidenecyclopropanes from Allenoates with Donor-Acceptor and Diacceptor Diazo Reagents

The first diastereo- and enantioselective cyclopropanation reactions of electron-deficient allenes with donor-acceptor and diacceptor diazo reagents are described. The desired enantioenriched alkylidenecyclopropanes (ACPs) were obtained in high yields with high diastereo- and enantioselectivities in the presence of Rh₂((S)-TCPTAD)₄ or Rh₂((R)-BTPCP)₄ catalysts (up to 95 % yield, >95 : 5 d.r. and 99 : 1 e.r.). This methodology gave a direct access to ACPs bearing multiple electron-deficient substituents and allows to further expand the availability of ACPs chemistry. Interestingly, during the examination of the scope of this reaction, the asymmetric intramolecular C−H insertion reaction into tert-butyl group was observed as a side reaction with up to 94 : 6 e.r.     

Measuring fluorescence to track a quantum emitter's state: a theory review

We review the continuous monitoring of a qubit through its spontaneous emission, at an introductory level. Contemporary experiments have been able to collect the fluorescence of an artificial atom in a cavity and transmission line, and then make measurements of that emission to obtain diffusive quantum trajectories in the qubit's state. We give a straightforward theoretical overview of such scenarios, using a framework based on Kraus operators derived from a Bayesian update concept; we apply this flexible framework across common types of measurements including photodetection, homodyne, and heterodyne monitoring and illustrate its equivalence to the stochastic master equation formalism throughout. Special emphasis is given to homodyne (phase-sensitive) monitoring of fluorescence. The examples we develop are used to illustrate basic methods in quantum trajectories, but also to introduce some more advanced topics of contemporary interest, including the arrow of time in quantum measurement, and trajectories following optimal measurement records derived from a variational principle. The derivations we perform lead directly from the development of a simple model to an understanding of recent experimental results.     

Carbon Dots (C‐dots) from Cow Manure with Impressive Subcellular Selectivity Tuned by Simple Chemical Modification

Improved cellular selectivity for nucleoli staining was achieved by simple chemical modification of carbon dots (C‐dots) synthesized from waste carbon sources such as cow manure (or from glucose). The C‐dots were characterized and functionalized (amine‐passivated) with ethylenediamine, affording amide bonds that resulted in bright green fluorescence. The new modified C‐dots were successfully applied as selective live‐cell fluorescence imaging probes with impressive subcellular selectivity and the ability to selectively stain nucleoli in breast cancer cell lineages (MCF‐7). The C‐dots were also tested in four other cellular models and showed the same cellular selection in live‐cell imaging experiments.